Skip to the content
2 layers57 × 22 mmAERIS Breakout Board, the printed circuit board in 3D

AERIS Breakout Board

Alexander-T-Moss/AERIS1

Open-source air quality monitor built around an ESP32 microcontroller, SEN55 module and custom breakout board.

Size
57 × 22 mm
Copper layers
2
Thickness
1.6 mm
Parts
10
Nets
16
Pads
37
Tracks, vias
34, 0
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
31 Jul 2025
Updated
6 Sep 2025

Overview

AERIS Breakout Board is an open-source printed circuit board by Alexander-T-Moss, from the Alexander-T-Moss/AERIS repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 57 × 22 mm with 10 parts on 16 nets, routed with 34 tracks and 0 vias.

It is built around the ESP32-C3F. Its parts include 3 connectors, 1 resistor, 1 IC and 1 transistor. It belongs with the interfaces and adapters and microcontroller boards boards and the ESP32 and RISC-V boards of this library.

Main components

1

README

README.md
image

AERIS – Air Quality Monitoring System

GitHub Release License Issues - AERIS Platform: ESP32

AERIS is an open-source air quality monitor built around an ESP32 microcontroller, SEN55 module and custom breakout board. It measures and reports environmental parameters, such as particulate matter, VOCs, humidity and temperature in real-time to either a Home Assistant instance (through ESPHome) or a local web app.


Project Goals

  • Accurate & Trustable Data – Obtained by using the factory-calibrated SEN55 and thermally isolating the unit from the other electronics.
  • Low-Cost – AERIS' DIY-friendly design approach and BOM considerations result in a unit cost that is more than halved when compared to equivalent off-the-shelf products, at only £35/€40/$48.
  • Full Hardware Utilisation – Using any of the provided firmware options, every last bit of information is extracted from AERIS, getting the most "bang-for-buck" out of the used hardware.
  • Simple Assembly – From a snap-fit case to a breakout PCB, assembly is streamlined to require minimal tools and only a few minutes.
  • Accessible Project - Care is taken to decrease friction from obtaining hardware to building an AERIS device. Unlike other monitors, AERIS can be used fully as a standalone unit without needing a Home Assistant instance.

Feature List

Comprehensive Sensor Array
  • Temperature
  • Relative Humidity
  • Absolute Humidity (Approximation)
  • VOC Index
  • Particulate Matter
    • PM1.0
    • PM2.5
    • PM4.0
    • PM10.0
  • Nitrogen Oxide Index (NOx)
  • Carbon Dioxide (w/ Add-On Board)
  • Atmospheric Pressure (w/ Add-On Board)
ESPHome Integration
Requires a Home Assistant instance; alternatively, AERIS can be operated without Home Assistant through its standalone mode.

Standalone Mode
The ESP controller can host a local webpage, circumventing the need for a Home Assistant instance.

1.54" OLED Display
Configurable to either show key data at a glance or show in-depth information reported by AERIS.

Snap-Fit Case
For an easy assembly, reduced BOM and clean finish, the case is designed to snap-fit together.


More Information

Interested in this project or building an AERIS unit? Visit the official documentation site for more info.

Parts

10
QtyValueFootprintReferences
2Conn_01x05_SocketLibrary:JST_XH_B5B-XH-A_1x05_P2.50mm_VerticalJ1, J3
11kLibrary:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1
12N3904Library:TO-92_InlineQ1
1Conn_01x02_SocketLibrary:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ2
1ESP32C3Library:XIAO_ESP32U1

The 6 most common of 10 parts.

More from Alexander-T-Moss/AERIS

1
  • 2 layers43 × 19 mmAERIS Expansion Board, the printed circuit board in 3D

    AERIS Expansion Board

    Alexander-T-Moss/AERIS

    Open-source air quality monitor built around an ESP32 microcontroller, SEN55 module and custom breakout board.

    6 parts1GPL-3.0

Similar boards

  • 2 layers168.9 × 123.3 mmOEM ECU, the printed circuit board in 3D

    OEM ECU

    aeonSolutions/AeonLabs-AI-Volvo-MKII-Open-Hardware

    Volvo MKII Open Hardware

    296 parts161CC0-1.0
  • 2 layers40 × 40 mmTiny slime, the printed circuit board in 3D

    Tiny slime

    gorbit99/tiny-slime

    A tiny and cheap module based SlimeVR tracker design

    12 parts42MIT
  • 2 layers40.3 × 75.7 mmMusiq player hardware, the printed circuit board in 3D

    Musiq player hardware

    bytecod3/MusiQ-Player

    An MP3 player clone built on ESP32

    64 parts7
  • 4 layers50 × 46 mmInternet radio speaker, the printed circuit board in 3D

    Internet radio speaker

    sini6a/internet-radio-speaker

    An open-source ESP32 Internet Radio Player with simple programming, USB charging, and on-the-go capability using a single-cell Li-ion battery.

    72 parts5GPL-3.0
  • 2 layers62 × 30 mmECG, the printed circuit board in 3D

    ECG

    NguyenThanhHuy-debug/PCB_IoT-Heart-rate-ECG-Monitoring-Device

    The PCBIoT-Heart-rate-ECG-Monitoring-Device repository provides open-source hardware design files for an IoT-enabled electrocardiogram (ECG) and heart-rate monitoring device.

    100 parts4
  • 4 layers14 × 44 mmTraffic light, the printed circuit board in 3D

    Traffic light

    fabiobaltieri/traffic-light

    45 parts3
  • 2 layers83.7 × 50.9 mmCNChess KiCad, the printed circuit board in 3D

    CNChess KiCad

    LepTho2233127/CNChess

    Automated Chess System

    32 parts2GPL-2.0
  • 2 layers43 × 50 mmEsp pmsa, the printed circuit board in 3D

    Esp pmsa

    neggles/esp-pmsa

    Makefile uses Jan Mrázek's KiKit, which I cannot recommend enough, and therefore has to be available on your system.

    28 parts1CC-BY-SA-4.0

Questions

How big is the AERIS Breakout Board PCB?

It measures 57 × 22 mm and has 2 copper layers, 1.6 mm thick.

What parts does the AERIS Breakout Board use?

10 parts, built around the ESP32-C3F. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the AERIS Breakout Board KiCad files?

From the Alexander-T-Moss/AERIS repository on GitHub, at the commit this page was made from: the board is PCBs/Breakout Board/AERIS Breakout Board.kicad_pcb and its schematic PCBs/Breakout Board/AERIS Breakout Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the AERIS Breakout Board design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).