
BMT BionX Minimum Translator vereinfacht
stancecoke/BionX_Minimal_Translator
Drive your BionX motor with a no-name battery and a Kunteng LCD-display without any further BionX-components

kicad files to make a PCB to control a common anode 12V led strip with WLED flashed on an ESP32.
ESP32 BUCK ANALOG LED STRIP COMMON ANODE is an open-source printed circuit board by lepetidozo, from the lepetidozo/ESP32_BUCK_ANALOG_LED_STRIP_COMMON_ANODE repository on GitHub. It is a 2-layer board with 27 parts on 51 nets, routed with 135 tracks and 1 via.
It is built around the IRF3205 and PN2222A. Its parts include 12 resistors, 6 transistors, 5 connectors, 2 capacitors and 2 ICs. It belongs with the lEDs and displays and power boards and the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10K | Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P7.62mm_Vertical | R2, R3, R5, R6, R8, R9 |
| 6 | 1K | Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P7.62mm_Vertical | R1, R4, R7, R10, R11, R12 |
| 3 | IRF3205 | Package_TO_SOT_THT:TO-220-3_Vertical | Q2, Q4, Q6 |
| 3 | PN2222A | Package_TO_SOT_THT:TO-92_Inline | Q1, Q3, Q5 |
| 2 | GND | Connector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_Vertical | J4, J5 |
| 1 | +12V | Connector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_Vertical | J3 |
| 1 | +5V | Connector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_Vertical | J6 |
| 1 | 100nF | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C2 |
| 1 | 470µF | Capacitor_THT:C_Radial_D10.0mm_H12.5mm_P5.00mm | C1 |
| 1 | ESP32_DEVKIT_C_V4 | footprints:ESP32-DevKitC-v4 | J1 |
| 1 | ~ | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-04P_1x04_P5.00mm | U2 |
| 1 | ~ | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | U1 |

stancecoke/BionX_Minimal_Translator
Drive your BionX motor with a no-name battery and a Kunteng LCD-display without any further BionX-components


jayanta525/dual-h-bridge
Dual H-Bridge Controller with IRF3205 and IR2104 MOSFET Driver, and with ATMega328P-AU PWM Controller




ampnics/Project-10
Mater KiCad with Projects is a series of lectures in which we are learning PCB designing

27 parts, built around the IRF3205 and PN2222A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the lepetidozo/ESP32_BUCK_ANALOG_LED_STRIP_COMMON_ANODE repository on GitHub, at the commit this page was made from: the board is ESP32_BUCK_ANALOG_LED_STRIP_COMMON_ANODE.kicad_pcb and its schematic ESP32_BUCK_ANALOG_LED_STRIP_COMMON_ANODE.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask lepetidozo before reusing the design.