Skip to the content
2 layers69 × 86 mmESP Interface Board, the printed circuit board in 3D

ESP Interface Board

LeoWatti99/CANTram-Framework
Size
69 × 86 mm
Copper layers
2
Thickness
1.6 mm
Parts
37
Nets
65
Pads
156
Tracks, vias
296, 21
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
14 Dec 2025
Updated
24 Jan 2026

Overview

ESP Interface Board is an open-source printed circuit board by LeoWatti99, from the LeoWatti99/CANTram-Framework repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 69 × 86 mm with 37 parts on 65 nets, routed with 296 tracks and 21 vias.

It is built around the ESP32-DEVKITC-VE, SN65HVD230QDRG4Q1 and L78L05ACZ. Its parts include 6 connectors, 5 resistors, 4 capacitors, 4 ICs and 1 diode. It belongs with the interfaces and adapters boards and the ESP32 boards of this library.

Main components

3

README

README.md

CAN-TRAM-Framework

Das CAN-TRAM-Framework ist ein mikrocontrollerbasiertes, modulares Steuerungssystem, dass sich aus einzelnen Modulen zusammensetzen lässt. Die Struktur des Systems orientiert sich an üblichen SPS-Systemen, sodass eine CPU bzw. ein Hauptmodul um beliebig viele Module erweitert werden kann, um Funktionen hinzuzufügen.

image

Inventor CAD Dateien öffnen

Die CAD Dateien des Projekts sind im Ordner Inventor CAD) enthalten. Um das Projekt wie vorgesehen zu öffnen muss in Inventor 2025 oder höher die Datei Controller.ipj geöffnet werden.

KiCAD Schaltungen öffnen

Im Ordner KiCad Schaltungen sind alle Projekte der einzelnen Platinen enthalten. Darin befinden sich sowhol Prototypen Schaltungen als auch aktuelle Modulplatinen. Um die Projekt zu öffnen wird KiCAD 9.0.6 benötigt. über die .kicad_pro-Dateien in den Unterordnern können die Projekte vollständig mit der Verlinkung zwischen Schaltplan und Layout geöffnet werden.

C++ Framework

Die Firmware des Systems ist als C++ Bibliothek im Ordner Framework enthalten.

Dokumentation

Die Software-Dokumentation kann hier geöffnet werden. Sie wird automatisch durch Doxygen erstellt und nach Änderungen des Codes aktualisiert.

Parts

37
QtyValueFootprintReferences
14SolderJumper_2_OpenJumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mmJP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8, JP9, JP10, JP11, JP12, JP13, JP14
4DG127A-5.08-06P-14-00AHSamacSys_Parts:DG127A50806P1400AHJ1, J2, J3, J4
20,1uCapacitor_THT:C_Disc_D5.1mm_W3.2mm_P5.00mmC3, C5
21kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR9, R10
10,33uCapacitor_THT:C_Disc_D5.1mm_W3.2mm_P5.00mmC4
110kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR2
110uCapacitor_THT:C_Disc_D5.1mm_W3.2mm_P5.00mmC2
1120Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR7
12,1kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR8
143860-5025SamacSys_Parts:438605025J7
1Conn_01x06Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_VerticalJ5
1ESP32-DEVKITC-VESamacSys_Parts:ESP32DEVKITCVEIC4
1ISO7721FDRSamacSys_Parts:SOIC127P600X175-8NIC2
1L78L05ACZSamacSys_Parts:L78L05ACZIC3
1LEDLED_THT:LED_D5.0mmD1
1RSH3-2405S_H2-RSamacSys_Parts:RSH32405SH2RPS1
1SN65HVD230QDRG4Q1SamacSys_Parts:SOIC127P600X175-8NIC1

The 35 most common of 37 parts.

More from LeoWatti99/CANTram-Framework

12

Similar boards

  • 2 layers125.2 × 61.9 mmPDP-8-Serial IC, the printed circuit board in 3D

    PDP-8-Serial IC

    sierrafoxtrot/PDP-8_Serial_AIO

    A W070 compatible serial interface for the original DEC PDP-8

    61 partsCERN-OHL-W-2.0
  • 2 layers62 × 50 mmDriver, the printed circuit board in 3D

    Driver

    jkirsons/stealth-controller

    With 8A driver, Magnetic Sensor, Microcontroller, Two-Wire Automotive Interface

    50 parts93
  • 2 layers50 × 36 mmDriver, the printed circuit board in 3D

    Driver

    jkirsons/stealth-controller-mini

    Stealth Controller Mini

    54 parts21
  • 2 layers66.1 × 70.8 mmPUEE, the printed circuit board in 3D

    PUEE

    kszygenda/PUEE

    PUT course "design of electrical and electronic systems" projects

    57 parts
  • 2 layers103.8 × 50 mmGalagino pcb set, the printed circuit board in 3D

    Galagino pcb set

    harbaum/galagino

    A Galaga, Pac-Man and Donkey Kong arcade emulator for the ESP32

    26 parts558
  • 2 layers115 × 75 mmSpinCoater, the printed circuit board in 3D

    SpinCoater

    RParkerE/OpenSilicon

    OpenSilicon enables DIY semiconductor fabrication with open-source guides for building IC equipment at home. The project includes BOMs, 3D files, firmware, and PDKs, supporting makers and researchers in chip fabrication.

    11 parts55GPL-3.0
  • 2 layers127.3 × 54.1 mmESP32 SolarBox, the printed circuit board in 3D

    ESP32 SolarBox

    cole8888/SRNE-Solar-Charge-Controller-Monitor

    Read data from SRNE solar charge controllers.

    34 parts42

Questions

How big is the ESP Interface Board PCB?

It measures 69 × 86 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ESP Interface Board use?

37 parts, built around the ESP32-DEVKITC-VE, SN65HVD230QDRG4Q1 and L78L05ACZ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ESP Interface Board KiCad files?

From the LeoWatti99/CANTram-Framework repository on GitHub, at the commit this page was made from: the board is KiCad Schaltungen/ESP Interface Board/ESP Interface Board.kicad_pcb and its schematic KiCad Schaltungen/Analog Input Prototyp/Analog Input Prototyp/Analog Input Prototyp.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the ESP Interface Board design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).