

Digital Input Prototyp
- Size
- 55 × 42 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 58
- Nets
- 48
- Pads
- 158
- Tracks, vias
- 323, 14
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 14 Dec 2025
- Updated
- 24 Jan 2026
Overview
Digital Input Prototyp is an open-source printed circuit board by LeoWatti99, from the LeoWatti99/CANTram-Framework repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 55 × 42 mm with 58 parts on 48 nets, routed with 323 tracks and 14 vias.
It is built around the ISO1I813T, 156120RS75000 and 156120GS75000. Its parts include 23 resistors, 11 diodes, 3 connectors, 2 capacitors and 1 IC.
Main components
3ISO1I813T
TSSOP-48-6.2mm-40℃~+125℃ Multi-voltage domain interface、Configurable debounce filter TSSOP-48-6.2mm DI/DO Isolators ROHSInfineon TechnologiesDigital Isolators156120RS75000
1206140° 20mA 2V 60mcd 624nm 632nm Water Clear 1206 LED Indication - Discrete ROHSWürth ElektronikLED Indication - Discrete156120GS75000
1206140° 20mA 235mcd 3.3V 520nm 525nm Emerald Green Water Clear 1206 LED Indication - Discrete ROHSWürth ElektronikLight Emitting Diodes (LED)
README
README.mdCAN-TRAM-Framework
Das CAN-TRAM-Framework ist ein mikrocontrollerbasiertes, modulares Steuerungssystem, dass sich aus einzelnen Modulen zusammensetzen lässt. Die Struktur des Systems orientiert sich an üblichen SPS-Systemen, sodass eine CPU bzw. ein Hauptmodul um beliebig viele Module erweitert werden kann, um Funktionen hinzuzufügen.
Inventor CAD Dateien öffnen
Die CAD Dateien des Projekts sind im Ordner Inventor CAD) enthalten. Um das Projekt wie vorgesehen zu öffnen muss in Inventor 2025 oder höher die Datei Controller.ipj geöffnet werden.
KiCAD Schaltungen öffnen
Im Ordner KiCad Schaltungen sind alle Projekte der einzelnen Platinen enthalten. Darin befinden sich sowhol Prototypen Schaltungen als auch aktuelle Modulplatinen. Um die Projekt zu öffnen wird KiCAD 9.0.6 benötigt. über die .kicad_pro-Dateien in den Unterordnern können die Projekte vollständig mit der Verlinkung zwischen Schaltplan und Layout geöffnet werden.
C++ Framework
Die Firmware des Systems ist als C++ Bibliothek im Ordner Framework enthalten.
Dokumentation
Die Software-Dokumentation kann hier geöffnet werden. Sie wird automatisch durch Doxygen erstellt und nach Änderungen des Codes aktualisiert.
Parts
58| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | TestPoint | TestPoint:TestPoint_Pad_D2.0mm | ~{CS}, ~{ERR}, 3V3, I1, I2, I3, I4, I5, I6, I7, I8, V+ |
| 8 | 12k | Resistor_SMD:R_1206_3216Metric | R1, R2, R3, R4, R5, R6, R7, R8 |
| 8 | 156120YS75000 | SamacSys_Parts:LEDM3216X130N | LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8 |
| 8 | 2k | Resistor_SMD:R_1206_3216Metric | R9, R10, R11, R12, R13, R14, R15, R16 |
| 3 | TestPoint_Probe | TestPoint:TestPoint_Keystone_5000-5004_Miniature | GND, GNDBB, SYNC |
| 2 | 156120RS75000 | SamacSys_Parts:LEDM3216X130N | LED9, LED10 |
| 2 | 22k | Resistor_SMD:R_1206_3216Metric | R19, R23 |
| 2 | 470 | Resistor_SMD:R_1206_3216Metric | R18, R20 |
| 1 | 100 | Resistor_SMD:R_1206_3216Metric | R22 |
| 1 | 100n | Capacitor_SMD:C_1206_3216Metric | C1 |
| 1 | 156120GS75000 | SamacSys_Parts:LEDM3216X130N | LED11 |
| 1 | 330k | Resistor_SMD:R_1206_3216Metric | R21 |
| 1 | 330n | Capacitor_SMD:C_1206_3216Metric | C2 |
| 1 | 40k | Resistor_SMD:R_1206_3216Metric | R17 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x08_Socket | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J1 |
| 1 | Conn_01x10 | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J3 |
| 1 | ISO1I813T | SamacSys_Parts:SOP50P810X110-48N | IC1 |
The 55 most common of 58 parts.
More from LeoWatti99/CANTram-Framework
12- 2 layers100 × 38 mm

- 2 layers100 × 38 mm

- 2 layers100 × 61 mm

- 2 layers65 × 37 mm

- 2 layers45.5 × 37.3 mm

- 2 layers69 × 86 mm

- 2 layers100 × 38 mm

- 2 layers100 × 38 mm

- 2 layers32.5 × 33 mm

- 2 layers36.5 × 25.5 mm

- 2 layers38.5 × 35 mm

- 2 layers55.5 × 18 mm

Similar boards
- 2 layers86.2 × 50.2 mm

MostlyBuildsSpeakerPod
MostlyBuilds/speaker-pod-pcb
This is a PCB design for an ESP32-based speaker controller
93 parts3CC-BY-SA-4.0 - 4 layers88 × 60 mm

Embedded v1
sofiamonty/embedded-pcb-pt100
4-layer KiCad PCB integrating a PT100 temperature sensor and SAMD21 microcontroller with LCD interface; includes schematics, layout, firmware, BOM, and PDF documentation.
48 parts - 2 layers15 × 23 mm

NeuroBits - Bicore
Binomica-Labs/Hardware
Open source tools for scientific inquiry and exploration!
8 parts22MIT - 2 layers252.9 × 77.6 mm

- 2 layers50 × 50 mm

- 2 layers97.3 × 71 mm

ZynScreen v1.5
zynthian/zynthian-hw
Zynthian hardware stuff: PCBs, schemes, parts specifications, pin assignment, ...
58 parts156 - 2 layers34 × 46 mm

- 2 layers148 × 81 mm

Communicator pcb
Hack-a-Day/2025-Communicator_Badge
The 2025 Hackaday Supercon RF Communicator Badge
58 parts107MIT
Questions
How big is the Digital Input Prototyp PCB?
It measures 55 × 42 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Digital Input Prototyp use?
58 parts, built around the ISO1I813T, 156120RS75000 and 156120GS75000. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Digital Input Prototyp KiCad files?
From the LeoWatti99/CANTram-Framework repository on GitHub, at the commit this page was made from: the board is KiCad Schaltungen/Digital Input Prototyp/Digital Input Prototyp.kicad_pcb and its schematic KiCad Schaltungen/Analog Input Prototyp/Analog Input Prototyp/Analog Input Prototyp.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Digital Input Prototyp design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).