Skip to the content
2 layers32.8 × 32.8 mmRefPhotoDiode MDversion, the printed circuit board in 3D

RefPhotoDiode MDversion

LeonAbelmann/MagOD1

Software for Magnetic Optical Density meter

Size
32.8 × 32.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
12
Nets
12
Pads
42
Tracks, vias
64, 17
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
13 Jan 2019
Updated
27 Sep 2023

Overview

RefPhotoDiode MDversion is an open-source printed circuit board by LeonAbelmann, from the LeonAbelmann/MagOD repository on GitHub, published under the MIT licence. It is a 2-layer board of 32.8 × 32.8 mm with 12 parts on 12 nets, routed with 64 tracks and 17 vias.

It is built around the BPW 21. Its parts include 3 capacitors, 3 connectors, 2 ICs, 1 resistor and 1 diode.

Main components

1

README

README.md

MagOD

Magnetic Optical Density meter Tijmen Hageman, Jordi Hendrix, Hans Keizer, Marcel Welleweerd, Dave van As, Ruthvik Bandaru, Rob Krawinkel, Leon Abelmann.

KIST Europe, University of Twente

Other sources

Next to software, also the source codes to create hardware are available here, as well as :

  • Measurement head design, 3D print file (OpenSCAD, on Thingiverse )
  • Spice simulations, electronic diagrams, PCB layout (Spice, KiCad on Dropbox)
  • Laser cut pattern for housing electronics (DXF, on Dropbox)

Specifications

  • Up to 800 samples per second, allows precise analysis of the rotation speed of magnetic bacteria
  • Three-dimensional quasi-Helmholtz configuration, with fields up to 5 mT
  • Three color LED: red: 645 nm, 1000 mcd, green: 520 nm, 1700 mcd and blue 460 nm, 500 mcd
  • Power supply with current feedback to compensate for coil heating, cut-off frequency 200 Hz
  • Large area photodiode (sensitivity 0.5 mlx, with green LED theoretical max OD range of 5.8)
  • Integrated pre-amplifier, SNR 83 dB (max OD range 4.0).
  • Dedicated 16-bit ADS1115 DA converter
  • Integrated temperature sensor
  • Reference light detector
  • Scattered light detector
  • Fully programmable (ESP32 using Arduino IDE), open source
  • User friendly spreadsheet recipe definition (csv format), with software to validate correctness
  • Data collection on SD card, accessible by ftp over Wifi

Additional info

How to join

Send mail to Leon (l.abelmann@tudelft.nl) if you are interested, all skills are welcome.

Parts

12
QtyValueFootprintReferences
3CCapacitors_SMD:C_0805C1, C2, C3
2Conn_01x04Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical_SMD_Pin1LeftJ1, J2
1BPW21Package_TO_SOT_THT:TO-5-2_WindowD1
1Conn_01x06Connector_Molex:Molex_Pico-Clasp_501331-0607_1x06-1MP_P1.00mm_VerticalJ3
1EMIshieldEMIshield:Wurth-3610213126S-EMIshield-13.26x12.3mmU2
1Ferrite_BeadInductor_SMD:L_0805_2012MetricL1
1OPAMPsmd-semi:SOT-23-5U1
1RResistor_SMD:R_0805_2012MetricR1

The 11 most common of 12 parts.

More from LeonAbelmann/MagOD

10
  • 2 layers180 × 95.5 mmODMeter, the printed circuit board in 3D

    ODMeter

    LeonAbelmann/MagOD

    Software for Magnetic Optical Density meter

    153 parts1MIT
  • 4 layers77 × 93 mmODMeter, the printed circuit board in 3D

    ODMeter

    LeonAbelmann/MagOD

    Software for Magnetic Optical Density meter

    87 parts1MIT
  • 4 layers27.2 × 27.2 mmPhotoDiode MDversion1.2, the printed circuit board in 3D

    PhotoDiode MDversion1.2

    LeonAbelmann/MagOD

    Software for Magnetic Optical Density meter

    19 parts1MIT
  • 4 layers27.2 × 27.2 mmPhotoDiode MDversion1.3, the printed circuit board in 3D

    PhotoDiode MDversion1.3

    LeonAbelmann/MagOD

    Software for Magnetic Optical Density meter

    19 parts1MIT
  • 4 layers27.2 × 27.2 mmPhotoDiode MDversion1.3, the printed circuit board in 3D

    PhotoDiode MDversion1.3

    LeonAbelmann/MagOD

    Software for Magnetic Optical Density meter

    18 parts1MIT
  • 4 layers26.8 × 26.8 mmPhotoDiode MDversion, the printed circuit board in 3D

    PhotoDiode MDversion

    LeonAbelmann/MagOD

    Software for Magnetic Optical Density meter

    15 parts1MIT
  • 2 layersRGBLed MDversion, the printed circuit board in 3D

    RGBLed MDversion

    LeonAbelmann/MagOD

    Software for Magnetic Optical Density meter

    6 parts1MIT
  • 2 layersLED, the printed circuit board in 3D

    LED

    LeonAbelmann/MagOD

    Software for Magnetic Optical Density meter

    4 parts1MIT

Similar boards

  • 2 layers106 × 53.3 mmFinalForLayout, the printed circuit board in 3D

    FinalForLayout

    CIDARLAB/Fluorescence-Detector

    42 parts1
  • 2 layers121.9 × 88.9 mmBackplane, the printed circuit board in 3D

    Backplane

    greyltc/hardware

    Hardware disign files, for use with the KiCAD EDA

    108 parts
  • 2 layers61.2 × 45.2 mmReceiver, the printed circuit board in 3D

    Receiver

    Froneusz/design-PCBs

    60 parts
  • 2 layersNrf bga, the printed circuit board in 3D

    Nrf bga

    github-linguist/linguist

    Language Savant. If your repository's language is being reported incorrectly, send us a pull request!

    12 parts14kMIT
  • 2 layers66.9 × 74.5 mmDeskHop, the printed circuit board in 3D

    DeskHop

    hrvach/deskhop

    Fast Desktop Switching Device

    12 parts7.9kGPL-3.0
  • 2 layers40 × 15 mmSensors, the printed circuit board in 3D

    Sensors

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    12 parts3kApache-2.0
  • 2 layers42.7 × 56.5 mmTle6240 driver, the printed circuit board in 3D

    Tle6240 driver

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    12 parts1.2k

Questions

How big is the RefPhotoDiode MDversion PCB?

It measures 32.8 × 32.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the RefPhotoDiode MDversion use?

12 parts, built around the BPW 21. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the RefPhotoDiode MDversion KiCad files?

From the LeonAbelmann/MagOD repository on GitHub, at the commit this page was made from: the board is MeasurementHeads/OlderVersions/refPhotoDiode_MDversion1.1/refPhotoDiode_MDversion.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the RefPhotoDiode MDversion design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).