6 layers84 × 98 mm
FujiNet-5200-Rev0
FujiNetWIFI/fujinet-hardware
Schematics and design files for FujiNet hardware
145 parts142
2 layers29.7 × 51 mm
Devboard
LeoMos10/Devboardidk a devboard
- Size
- 29.7 × 51 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 47
- Nets
- 80
- Pads
- 396
- Tracks, vias
- 722, 40
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 24 Sep 2026
- Updated
- 11 Oct 2026
Overview
Devboard is an open-source printed circuit board by LeoMos10, from the LeoMos10/Devboard repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 29.7 × 51 mm with 47 parts on 80 nets, routed with 722 tracks and 40 vias.
It is built around the RP2354B. Its parts include 17 capacitors, 11 resistors, 6 connectors, 4 switches and 3 diodes. It belongs with the microcontroller boards boards and the RP2350 boards of this library.
Main components
1README
README.mdDevboard
Devboard is a custom Raspberry Pi RP2354B development board based on the Hack Club devboard guide. The schematic and PCB are being designed in KiCad.
Why this board?
I wanted to design a microcontroller board itself, with USB-C, GPIO, onboard buttons and status LEDs.
Parts
- Raspberry Pi RP2354B microcontroller
- USB-C connector
- 3.3 V power supply with an inductor and a Schottky diode
- Yellow LED and a RGB LED
- BOOTSEL, RUN and 2 user buttons
- 2.54 mm pin headers, plus additional headers, SWD debug probe
CAD Model
No case yet.
PCB
The KiCad project is in PCB/. Open the KiCad project to view the schematic and board together. Custom footprints and 3D models are stored beside the KiCad files.
Schematic
The current schematic includes the RP2354B circuit, USB-C, power, buttons and LEDs.
Board
The schematic now matches the PCB references, footprints and electrical nets. Assembly files still need to be checked before ordering.
Front and rear of the PCB:
Copper layers:
Firmware Overview
Firmware has not been added yet.
BOM
The BOM for one board includes JLCPCB links and the quantities in the saved parts cart. It is a design BOM; the JLCPCB assembly BOM and placement file are still pending.
AI usage
AI assistance was used for parts research(both selcetin what component and find th ecorrect one on sites),also for KiCad advice. The schematic, footprint and PCB still was done by hand by me.
Extra stuff
Its questionable to me too
Parts
47| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C4, C5, C10, C11, C12, C13, C14, C15, C16 |
| 4 | 330 | Resistor_SMD:R_0402_1005Metric | R6, R7, R8, R9 |
| 3 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3 |
| 2 | 15pF | Capacitor_SMD:C_0402_1005Metric | C7, C8 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R5, R10 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 2 | 4,7uF | Capacitor_SMD:C_0603_1608Metric | C6, C17 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3, J5 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_TS-1088-xR020 | SW3, SW4 |
| 1 | 1uF | Capacitor_SMD:C_0402_1005Metric | C9 |
| 1 | 3,3uH | EasyEDA_Imported:IND-SMD_L2.0-W1.6_AOTA-B201610S3R3-101-T | L1 |
| 1 | 33 | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | ABM8-272-T3, 12 MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | Conn_01x20_Left | leo/kicad_vari:goood_PinHeader_1x20_P2.54mm_Vertical_left_cutom_pad | J2 |
| 1 | Conn_01x20_Right | leo/kicad_vari:goood_PinHeader_1x20_P2.54mm_Vertical_right_cutom_pad | J6 |
| 1 | D_Schottky | Diode_SMD:D_SOD-123 | D1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D3 |
| 1 | LED_ARGB | EasyEDA_Imported:LED-ARRAY-SMD_4P-L3.2-W2.7-TL-RD_TJ-S3528 | D2 |
| 1 | MCP1700x-330xxTT | Package_TO_SOT_SMD:SOT-23 | U3 |
| 1 | RP2354B | Package_DFN_QFN:QFN-80-1EP_10x10mm_P0.4mm_EP3.4x3.4mm | U1 |
| 1 | SW_Push_BOOTSEL | Button_Switch_SMD:SW_SPST_TS-1088-xR020 | SW1 |
| 1 | SW_Push_RUN | Button_Switch_SMD:SW_SPST_TS-1088-xR020 | SW2 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
The 45 most common of 47 parts.
Questions
How big is the Devboard PCB?
It measures 29.7 × 51 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Devboard use?
47 parts, built around the RP2354B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Devboard KiCad files?
From the LeoMos10/Devboard repository on GitHub, at the commit this page was made from: the board is PCB/devboard.kicad_pcb and its schematic PCB/devboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Devboard design in my own project?
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 6 layers37.9 × 37.9 mm
OpenFC
OpenDrone-hw/OpenFC-Lite
Open-source Betaflight flight controller. RP2354B, 30.5x30.5 mm, 6-layer, 3-8S, CERN-OHL-S-2.0.
164 parts85CERN-OHL-S-2.0 - 4 layers110 × 64 mm
SYCL Badge 2024
ZigEmbeddedGroup/sycl-badge
The badge for the SYCL conference! https://zigembeddedgroup.github.io/sycl-badge/
145 parts39 - 4 layers62.8 × 61.7 mm
- 4 layers109.5 × 60.7 mm
- 4 layers260 × 113 mm
- 4 layers136.3 × 71.1 mm
- 6 layers85.9 × 77.5 mm
Frob2354
tschak909/frob-modern
The Frob, An Apple II Atari 2600 Development System, re-made as an RP2354 based device.
80 parts8