Skip to the content
2 layers30 × 110 mmWavefolder, the printed circuit board in 3D

Lenimal Github for DIY for a Eurorack Synth

Size
30 × 110 mm
Copper layers
2
Thickness
1.6 mm
Parts
89
Nets
48
Pads
208
Tracks, vias
342, 29
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
13 Apr 2024
Updated
18 Oct 2026

Overview

Wavefolder is an open-source printed circuit board by lennartquerter, from the lennartquerter/euro-rack-synth repository on GitHub. It is a 2-layer board of 30 × 110 mm with 89 parts on 48 nets, routed with 342 tracks and 29 vias.

It is built around the TL072, 1N4148W and BC847. Its parts include 36 resistors, 22 diodes, 6 capacitors, 3 transistors and 3 connectors. It belongs with the audio and music boards of this library.

Main components

3

README

README.md

Building a Eurorack synth

tags: lenimal, eurorack, synthesizer, diy, electronics, music

This is a collection of notes and resources for building a Eurorack synth. I'm not an expert, but I'm learning as I go and I'm happy to share what I've learned.

First Jam Session

Improv session, 2026

Version 1

(First version without panels)

Version 1

(First version with 3D printed panels, I'm still missing knobs)

01.01.2025 Updated version

Update 2025

Disclaimer

I am not responsible for any damage to any of your modules. The modules within this repository have been tested and built by myself and used only with the other modules in this system.

There is a chance they work well with other off-the-shelf modules, but I do not own any, so I can not test it out. If you proceed to copy or use any file within this repository, you are doing this at your own risk.

These modules are also not perfect 1v/oct or temperature controlled. This project should be seen as a fun hobby project and not as professional advice on how to build synthesisers.

Modules

Confirmed/Ready

There are tags on the commit that was ordered (for the exact gerber files)

If there are issues, they will be reported in the README for each module.

TypeModuleVersionStatusTestedIssues?Panel available
VCOVixen [MKI]2BuiltyesNoYes (3D print)
VCO33401BuiltYesNoYes (3D print)
LFOXOF1BuiltYesNoYes (3D print)
VCASparkle [MKI]2BuiltYesNoYes (3D print)
SEQSensei [Baby 8]2BuiltyesNoYes (3D print)
EGScribble [MKI]2BuiltyesNoYes (3D print)
EG7555 [Fastest Envelope]1BuiltyesNoYes (3D print)
Filter33201BuiltYesNoYes (3D print)
FilterLow Orbit [MKI]1BuiltyesNoYes (3D print)
MixerDistorted Daisy [MKI]2BuiltyesNoYes (3D print)
DrumsMuay Thai (Kick) [MKI]1BuiltYesNoYes (Gerber)
UtilityWavefolder (SuperNova)1builtYesMinorYes (Gerber)
UtilityPassive Mult1BuiltYesNoYes (3D print)
UtilityActive Mult1BuiltYesNoYes (3D print)
UtilityChrono Divider1BuiltyesNoYes (3D print)
UtilityEuro ProtoType Helper1BuiltyesNoNo
UtilityCable tester1BuiltYesNoNo
DrumsClap/Snare1NotWorkingyes?Yes (Gerber)
UtilityMidi-2-cv (Midas)2BuiltyesNoYes (Gerber)
FXDelay (PT-chip)2BuiltYesNoYes (Gerber)
FXStorm [Clouds]2BuiltyesMinorYes (Gerber)

The story

Since young, I have always been interested in 2 things: Electronics & Music. I have played many instruments over the years (drums, guitar, and a bit of piano). When I was a teenager, I got into electronic music production. I DJ'ed (as Lenimal) for about 10 years in and around Belgium.

I moved into software engineering after my studies in Film. Not having a computer science or electronics degree, I always felt that I needed to explore the connection with the hardware on which my software ran.

I started following a YouTube series by Ben Eater, showing how to build an 8-bit computer on breadboards. I got pretty far until my cat, being the cat he is, decided that the computer would look better on the ground, destroying most of the connections. The motivation to continue was lost after seeing the work it would take to repair it.

I learned quite a lot about electronics during that process! While visiting family in the States, I got the opportunity to visit the MOOG factory in Ashville, NC. I didn't buy a MOOG (sadly enough), but I got the MFOS book on how to build an analog synth.

After immersing myself in the MFOS book, I was filled with a sense of determination. I read the book cover to cover at least four times, absorbing every detail. It was then that I made a firm decision-I was going to build my own synthesizer!

I started watching more in-depth tutorials on YouTube and came across Moritz Klein's channel. He explains the process in great detail and I could follow along at home. (Thank you, Moritz!)

I still had ample chips, resistors, and capacitors from my previous 8-bit computer build, so I started looking into the more specialized equipment I needed. It was clear very soon that I needed a reasonable Oscilloscope and some other things (described below).

Once I had collected all the needed items, I made a goal. In 2024, I would build a modular synth from scratch. It took me 3-4 months to get the first 5 modules:

  • VCO
  • Sequencer
  • VCA
  • Envelope Generator
  • Active Mixer

Of course, they didn't turn out perfect. When I ordered the PCBs and started soldering, I found many issues. Some on the schematic (like I connected the wrong inputs on the op-amp on the EG) and others on the PCB (my first attempt at an SPDT switch footprint didn't fit my switches at all).

PCB hack

(example of a hack on the V1 boards because I forgot the resistors)

As I'm learning, I will keep updating the modules in this repository. I hope it inspires and helps others create awesome modules & start their adventure into DIY Synths!

As my creativity ends with designing PCB's, I call upon my (very beautiful) wife to name the modules, this is why they might sound like the name of unicorns.

Getting Started

What do you need?

I didn't have much electronic equipment, so I started saving and purchasing as I got the money:

  • Oscilloscope (Rigol DS1054Z)
  • Bench Dual Power Supply (Komerci QJ3005EIII)
  • Solder Station (Hakko FX888D-BY)
  • Precision measuring tool (Digital Calliper)

I already had most of the other small tools, but here is a list of my most used tools:

  • Precision Pliers (KNIPEX 78 61 125)
  • Automatic Wire Stripper (KNIPEX 12 62 180)
  • ESD Tweezers (KNIPEX 92 28 69, don't get cheap ones)
  • de-soldering pump (It's not easy to use, but has saved my PCB's many times already!)
  • breadboards (get enough if you plan to keep your builds for debugging)

Components

The next step was to start sourcing components, because I did not want to just order kits.

I started by watching lots of YouTube and getting schematics from the internet. That gave me a good idea of the main things I would need. Here are the most used components I have. The quantity is just a guideline for how many I got to get started.

Most of the items I got in bulk while travelling in Asia. I kept space in my suitcase for these components as I could get them pretty cheap there. I didn't have any problems with flying when checking them in, and no issues with customs. (this is not a promise that you will not have problems, always read guidelines and regulations of the country you are flying from/to)

suitcase

(Suitcase coming back from Shanghai)

Resistors

I started with a big set of lots of different values to start with, and ordered in bulk when I needed them. Here is the list of my most used resistor values:

  • 1M (50x)
  • 100K (200x)
  • 68K (100x)
  • 47K (100x)
  • 33K (50x)
  • 22K (50x)
  • 14K (50x)
  • 10K (100x)
  • 4.7K (100x)
  • 1K (100x)
  • 470R (50x)
  • 200R (50x)
  • 100R (100x)
  • 10R (100x)

Potentiometers

I have been looking for cheap (but good) ones that fit on PCB's vertically for a long time. The best I can found are the ALPHA 9mm (I buy them on thonk.co.uk). You can find some on digiKey, but the ALPHA's are my recomendation. I bought some with a D-shaft, and others just as a long shaft.

  • A1M (10x)
  • B250K (10x)
  • A250K (10x)
  • B100K (50x)
  • A100K (10x)
  • B50K (10x)

Diodes

  • 1N1418 [Signal] (200x) Used for general-purpose direction of current
  • 1N5819 [Schottky] (100x) Used for power guards

Capacitors

It's also good to have some of every value. I got a box of electrolytic, ceramic and film

For the film capacitor's I try to use WIMA Caps

  • 1uF MKS
  • 0.1uF MKS
  • 2.2nf MKS
  • 47uF electrolytic
  • 0.1uf electrolytic

... you might want to buy just a set of these

Transistors

There are some general NPN and PNP transistors you can get, I mainly got some variety that I found on videos and blogs:

  • BC558 (PNP, 25x)
  • BC548 (NPN, 50X)
  • 2N2904 (PNP, 25x)

IC's

  • TL072 (25x) [operational amplifier]
  • TL074 (50x) [operational amplifier]
  • CD40106 (10x) [Hex Schmidt trigger]
  • CD4016 [decade counter]
  • CD4040 [binary counter]

Schematics & PCB creation

I use kiCad, open-source software to design all my schematics. It's pretty easy to get a hang of it and also has a built in PCB editor. You can also design custom footprints for components they don't have in their (pretty big) library. I have included some of my footprints/symbols in this repo.

Design tips

Testing Points

For my first PCB, I had some testing points and that made it easier to debug. I forgot them for all the other ones and had a really bad time. I had to keep prodding resistor legs to understand what was going on. Always add testing points to your schematic & PCB.

Measure

Always measure 20 times when creating a footprint. It's really annoying when you have ordered your new PCB and the component just does not fit. I tried to make a SPDT switch footprint, and they just did not fit well.

PIN numbers

Make sure when you are giving the pins a number, the correspond to the correct number on the whole. I had the issue with my SPDT switch, that they just didn't work. I got the holes mixed up and ended with the wrong pin out.

LED's

When using an LED, never connect it directly to an IC to drive it. Always use a transistor to drive the LED. This is important because you don't want to burn your IC because there is too much current flowing over your LED.

Led Driver

Header pins

If you are following my schematics, you will see I use header/socket pins to connect my boards. I first started with the 2.00mm pins. I could not easily find tall sockets, so I ended having to always stack 2 on top of each other, this was not super stable in the end, and I had to solder all the cap's to the back of the board because I didn't want to use 3 stacked socket pins.

I currently use the more standard 2.56mm pins.

Mounting holes

Make sure you place 4 mounting holes on your board, and that they match the coordinates of the top board. I got simple 3mm & 2mm spacers from nylon.

Front Panels

I have a 3D printer accessible at the office, so I use it to build and prototype the designs. At some point I might turn to a professional milling company but for now, it works well. I use Fusion 360 for the designs (there is a free non-commercial license!).

Modules

Ordered (run_4, 2026-10-10)

PCBs are ordered, not yet built or tested.

TypeModuleVersionStatusTested
UtilityMagician / Rota Fortunae (Quantizer)2OrderedNo
UtilityClockfall (Master Clock)1OrderedNo
UtilityNumica Core (Precision Adder)1OrderedNo
UtilityXpander (Dual Compressor)1OrderedNo
VCAMLK (Quad VCA)1OrderedNo
DrumsBasari [Clone]1OrderedNo
CloneThe Wheel / The Pattern [Plaits]1OrderedNo
UtilityBus Board1OrderedNo

In progress

The following modules are still under active development. They are not yet ready for production usage.

TypeModuleVersionStatusTested
DrumsSnare / Clap2ConceptNo
DrumsColiseum (Cymbals & Hats)1ConceptNo
DrumsToms / Subkick1ConceptNo
DrumsBazaar (Percussion)1ConceptNo
UtilitySD card folder Sampler1ConceptNo
UtilityConductor1ConceptNo
Mixer9-Channel Stereo Mixer1ConceptNo
CloneCat's Eye [Marbles]1ConceptNo

Next

TypeModuleVersionStatusTested
UtilityNoise Module1ConceptNo
UtilityAND/OR1ConceptNo
UtilityMath?1ConceptNo
Utility1v/oct tuner1ConceptNo
FXDelay (DBB)1ConceptNo
FXReverb (Spring)1ConceptNo
FXSample&Hold1ConceptNo

Previous versions

TypeModuleVersionStatusTestedIssues?
VCOVixen1BuiltYesMinor
VCASparkle1BuiltYesNo
SEQSensei1BuiltYesMinor
EGScribble1BuiltYesYes
MixerDistorted Daisy1BuiltyesNo
UtilityMidi-2-cv (Midas)1Builtyesyes
DrumsClap/Snare1Builtyesyes
FXDelay (PT-chip)1BuiltYesyes
FXClouds Clone / Digital FX1Builtyesyes

Module links

Voltage Controlled Oscillators

Drums/Percussion

Voltage Controlled Amplifiers

Sequencer

Envelope Generator

Filters

Active Mixer

Effects

Clones

Utility

Parts

89
QtyValueFootprintReferences
201N4148WDiode_SMD:D_SOD-123D3, D4, D5, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22 +4
915KResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR10, R19, R21, R23, R25, R27, R28, R30, R32
5100KResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R3, R4, R18, R20
4100nFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC3, C4, C5, C6
3B100KSynth:Potentiometer_TT_P0915NRV1, RV2, RV5
3BC847Package_TO_SOT_SMD:SOT-23Q1, Q2, Q3
2100K [1%]Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR14, R17
210K [1%]Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR12, R13
210RResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR15, R16
215K [1%]Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR8, R11
21N5819Diode_SMD:D_SOD-123D1, D2
222KResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR6, R7
233KResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR9, R22
247uFCapacitor_THT:CP_Radial_D6.3mm_P2.50mmC1, C2
256KResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR33, R35
25K6Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR29, R31
2LOGOSynth:lenimal_logo_fullG***, G***
1+12VConnector_Pin:Pin_D1.0mm_L10.0mmTP1
1-12VConnector_Pin:Pin_D1.0mm_L10.0mmTP3
11KSynth:Potentiometer_Bourns_3296W_VerticalRV4
11KResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR36
127KResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR26
12K7Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR24
1680RResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR5
168KResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR2
16K8Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR34
1B100KSynth:Potentiometer_Bourns_3296W_VerticalRV3
1CTRL_INPUTSynth:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHolesJ2
1Conn_02x05_PWR_EurorackSynth:IDC-Header_2x05_P2.54mm_VerticalH1
1FINAL_STAGEConnector_Pin:Pin_D1.0mm_L10.0mmTP9
1FOLDER_HALF_OUTConnector_Pin:Pin_D1.0mm_L10.0mmTP7
1FOLDER_OUTConnector_Pin:Pin_D1.0mm_L10.0mmTP6
1GNDConnector_Pin:Pin_D1.0mm_L10.0mmTP2
1INPUTConnector_Pin:Pin_D1.0mm_L10.0mmTP4
1OUTPUTConnector_Pin:Pin_D1.0mm_L10.0mmTP8
1OUTPUTSynth:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHolesJ3
1SHAPE_INPUTConnector_Pin:Pin_D1.0mm_L10.0mmTP5
1TL072Package_SO:SO-8_3.9x4.9mm_P1.27mmU1
1TL074Package_SO:SO-14_3.9x8.65mm_P1.27mmU2
1WAVE_INPUTSynth:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHolesJ1

More from lennartquerter/euro-rack-synth

12
  • 4 layers111 × 110 mmComplex vco ranged, the printed circuit board in 3D

    Complex vco ranged

    lennartquerter/euro-rack-synth

    Lenimal Github for DIY for a Eurorack Synth

    234 parts13
  • 4 layers202.5 × 110 mmCats eye, the printed circuit board in 3D

    Cats eye

    lennartquerter/euro-rack-synth

    Lenimal Github for DIY for a Eurorack Synth

    227 parts13
  • 2 layers60 × 110 mmMad hatter, the printed circuit board in 3D

    Mad hatter

    lennartquerter/euro-rack-synth

    Lenimal Github for DIY for a Eurorack Synth

    197 parts13
  • 2 layers60 × 110 mmFolder sample player, the printed circuit board in 3D

    Folder sample player

    lennartquerter/euro-rack-synth

    Lenimal Github for DIY for a Eurorack Synth

    191 parts13
  • 4 layers50 × 110 mmEncore, the printed circuit board in 3D

    Encore

    lennartquerter/euro-rack-synth

    Lenimal Github for DIY for a Eurorack Synth

    180 parts13
  • 2 layers60 × 110 mmCompressor, the printed circuit board in 3D

    Compressor

    lennartquerter/euro-rack-synth

    Lenimal Github for DIY for a Eurorack Synth

    180 parts13
  • 4 layers60 × 110 mmToms, the printed circuit board in 3D

    Toms

    lennartquerter/euro-rack-synth

    Lenimal Github for DIY for a Eurorack Synth

    177 parts13
  • 2 layers60 × 100 mmSample player brain, the printed circuit board in 3D

    Sample player brain

    lennartquerter/euro-rack-synth

    Lenimal Github for DIY for a Eurorack Synth

    160 parts13
  • 4 layers50 × 110 mmMidi-2-cv, the printed circuit board in 3D

    Midi-2-cv

    lennartquerter/euro-rack-synth

    Lenimal Github for DIY for a Eurorack Synth

    151 parts13
  • 2 layers70 × 110 mmPlaits clone, the printed circuit board in 3D

    Plaits clone

    lennartquerter/euro-rack-synth

    Lenimal Github for DIY for a Eurorack Synth

    150 parts13
  • 4 layers60 × 110 mmRicochet, the printed circuit board in 3D

    Ricochet

    lennartquerter/euro-rack-synth

    Lenimal Github for DIY for a Eurorack Synth

    145 parts13
  • 2 layers141 × 111 mmSensei, the printed circuit board in 3D

    Sensei

    lennartquerter/euro-rack-synth

    Lenimal Github for DIY for a Eurorack Synth

    138 parts13

Similar boards

  • 4 layers81 × 113.2 mmAuralab Workstation Vishal, the printed circuit board in 3D

    Auralab Workstation Vishal

    Vishalbabu-09/Auralab_Workstation

    Advanced 4-layer PCB design featuring split-plane noise isolation (AGND/DGND) and asynchronous dual-core processing. Implements a handheld multi-tool oscilloscope, current tracker, and symmetrical DC power supply.

    81 parts1
  • 4 layers19 × 100 mmBinaryclkdiv, the printed circuit board in 3D

    Binaryclkdiv

    xdylanm/binary-clock-divider

    A simple binary clock divider based on the 4024.

    74 partsMIT
  • 4 layers19 × 100 mmMixer, the printed circuit board in 3D

    Mixer

    xdylanm/mix-three

    Simple 3 channel mixer in 4HP

    45 partsMIT
  • 4 layers118 × 88 mmVinyl adc rev e, the printed circuit board in 3D

    Vinyl adc rev e

    MadsRudolph/vinyl-adc

    Discrete 3rd-order delta-sigma stereo audio ADC, built from op-amps and logic gates: a four-layer Raspberry Pi HAT made by PCBWay, with KiCad files, SPICE simulations and measurements

    184 parts1
  • 2 layers58 × 110 mmVco core, the printed circuit board in 3D

    Vco core

    shmoergh/moduleur

    Fully analog DIY-friendly modular synth

    146 parts222
  • 2 layers200 × 100 mmPolykit x monosynth, the printed circuit board in 3D

    Polykit x monosynth

    polykit/polykit-x-monosynth

    The Polykit X1 is a DIY semi-modular, analog, patchable synthesizer

    167 parts94
  • 2 layers281.1 × 236.5 mmMiniDrumkit2, the printed circuit board in 3D

    MiniDrumkit2

    Fihdi/MiniDrumkit

    Eurorack DrumKit module with a 3 channel wave-file player and analog Hi-Hat and Kick Drum sections

    239 parts15MIT
  • 2 layers58.4 × 50.8 mmHaible tau phaser plug in board, the printed circuit board in 3D

    Haible tau phaser plug in board

    JordanAceto/VCF_plug_in_boards

    Various small synthesizer Voltage Controlled Filter pcbs

    140 parts11CC-BY-4.0

Questions

How big is the Wavefolder PCB?

It measures 30 × 110 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Wavefolder use?

89 parts, built around the TL072, 1N4148W and BC847. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Wavefolder KiCad files?

From the lennartquerter/euro-rack-synth repository on GitHub, at the commit this page was made from: the board is modules/utility/6-wavefolder/kiCad/control/wavefolder.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Wavefolder design in my own project?

Its repository states no licence, so its author keeps all rights: ask lennartquerter before reusing the design.