

LFO DigiVC
Eurorack synthesizer module designs
- Size
- 101.6 × 106.7 mm
- Copper layers
- 6
- Thickness
- 1.6 mm
- Parts
- 58
- Nets
- 85
- Pads
- 236
- Tracks, vias
- 458, 116
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 9 Dec 2021
- Updated
- 27 Nov 2024
Overview
LFO DigiVC is an open-source printed circuit board by Len42, from the Len42/Synth repository on GitHub. It is a 6-layer board of 101.6 × 106.7 mm with 58 parts on 85 nets, routed with 458 tracks and 116 vias.
It is built around the ATMEGA328P-PU, MCP4821-E/P and MCP4822-E/P, with the MBR150 and VAOL-5LSBY1 among its other parts. Its parts include 20 resistors, 13 capacitors, 8 connectors, 5 ICs and 5 diodes. It belongs with the audio and music boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
5ATMEGA328P-PU
DIP-28-300mil-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH DIP-28-300mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)MCP4821-E/P
PDIP-8-40℃~+125℃ 1 12 12LSB 2.7V~5.5V 330uA 4.5us SPI Voltage Buffer PDIP-8 Digital to Analog Converters (DAC) ROHSMicrochip TechnologyDigital To Analog Converters (DAC)MCP4822-E/P
PDIP-8-40℃~+125℃ 12 12LSB 2 2.7V~5.5V 20MHz 4.5us 415uA 50ppm/℃ Built-in Built-in SPI Voltage Buffer PDIP-8 Digital to Analog Converters (DAC) ROHSMicrochip TechnologyDigital To Analog Converters (DAC)MBR150
DO-41-65℃~+150℃ 1 Independent 1A 1V@3A 25A 500uA@50V 50V DO-41 Schottky Diodes ROHSonsemiSchottky DiodesVAOL-5LSBY1
插件LED Indication - DiscreteVCC
README
modules/Noise-SH/README.mdNoise / Sample & Hold
4HP Eurorack Module
Features
- White and pink(ish) noise output
- Sample-and-hold with variable slew rate
- S&H can be triggered by an internal clock or external input
- Internal clock is output on the trigger jack when selected
Notes
This module is built using the Delptronics Module Construction Set which includes PCBs for the front panel controls and other components. The PCB layout file is just a guide showing how I placed the components on the Delptronics boards. (It's a bit of a mess - sorry!)
Please note that I am a hobbyist, not a trained electronics engineer. No guarantees!
Acknowledgements
Software Used
KiCad 5.1.10-1
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Parts
58| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100N | -lmp-misc:C_Disc_D5.0mm_W2.5mm_P2.50mm | C3, C4, C5, C6, C7, C8, C9, C10 |
| 4 | WQP-PJ398 | -lmp-synth:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical | J5, J6, J7, J8 |
| 3 | 30K | -lmp-stripboard:SB_Gen_1 | R13, R14, R15 |
| 3 | 3N3 | -lmp-misc:C_Rect_Kemet_L7.2mm_W2.5mm_P5mm | C11, C12, C13 |
| 2 | 100K | -lmp-synth:Potentiometer_Alpha_RD901F-40-00D_Single_Vertical | RV5, RV7 |
| 2 | 100K | -lmp-stripboard:SB_Gen_1 | R1, R2 |
| 2 | 10U | -lmp-misc:CP_Radial_D5.0mm_P2.50mm | C1, C2 |
| 2 | 1K | -lmp-stripboard:SB_Gen_1 | R17, R20 |
| 2 | 1N5711 | -lmp-stripboard:SB_Gen_1 | D3, D4 |
| 2 | 20K | -lmp-misc:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4, R8 |
| 2 | 47K | -lmp-misc:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R9, R10 |
| 2 | MBR150 | Diode_THT:D_DO-41_SOD81_P7.62mm_Horizontal | D1, D2 |
| 1 | 100K | -lmp-stripboard:SB_Gen_2 | R19 |
| 1 | 10K | -lmp-stripboard:SB_Gen_6 | R3 |
| 1 | 10K | -lmp-stripboard:SB_Gen_11 | R12 |
| 1 | 10K | -lmp-stripboard:SB_Gen_1 | R5 |
| 1 | 16MHz | Crystal:Resonator_muRata_CSTLSxxxX-3Pin_W5.5mm_H3.0mm | Y1 |
| 1 | 1K | -lmp-misc:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R18 |
| 1 | 1K | -lmp-misc:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R16 |
| 1 | 20K | -lmp-stripboard:SB_Gen_2 | R7 |
| 1 | 20K | -lmp-stripboard:SB_Gen_4 | R6 |
| 1 | 2N3904 | -lmp-misc:TO-92_Inline_Wide | Q1 |
| 1 | 47K | -lmp-stripboard:SB_Gen_5 | R11 |
| 1 | ATmega328P-PU | Package_DIP:DIP-28_W7.62mm | U2 |
| 1 | Conn_Back | -lmp-synth:PinHeader_Delptronics_Back_Left_4HP | J11 |
| 1 | Conn_Front | -lmp-synth:PinSocket_Delptronics_Front | J10 |
| 1 | Eurorack_10 | -lmp-synth:PinHeader-Eurorack-10-TH | J9 |
| 1 | FTDI USB-TTL | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | L78L05_TO92 | -lmp-misc:TO-92_Inline_Wide | U1 |
| 1 | MCP4821 | -lmp-misc:DIP-8_W7.62mm_LongPads | U4 |
| 1 | MCP4822 | -lmp-misc:DIP-8_W7.62mm_LongPads | U3 |
| 1 | ON_OFF_ON | -lmp-misc:SW_SPDT_THT_2.54 | SW6 |
| 1 | RESET | -lmp-misc:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | SPST | -lmp-misc:SW_SPST_THT_2.54 | SW8 |
| 1 | TL074 | -lmp-misc:DIP-14_W7.62mm_LongPads | U5 |
| 1 | VAOL-5LSBY1 | LED_THT:LED_D5.0mm | D5 |
More from Len42/Synth
12- 2 layers91.2 × 108.2 mm

- 2 layers101.3 × 108.2 mm

- 2 layers111.5 × 106.4 mm

- 2 layers111.3 × 108.2 mm

- 6 layers101.6 × 108.2 mm

- 2 layers111.3 × 102.6 mm

- 2 layers91.4 × 108.2 mm

- 2 layers98.5 × 89.2 mm

- 2 layers95 × 108.2 mm

- 2 layers94.2 × 108.2 mm

- 2 layers88.8 × 108.2 mm

- 2 layers15.2 × 27.9 mm

Similar boards
- 2 layers72.1 × 99.2 mm

- 2 layers111.3 × 106.4 mm

Super Sixteen v1
matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer
141 parts171 - 2 layers105 × 65 mm

- 2 layers39.4 × 107.9 mm

- 2 layers29.2 × 109.2 mm

- 2 layers110.5 × 108.2 mm

- 2 layers99.9 × 70.5 mm

Moglabs remote locking board
atomlaser-lab/esp32-laser-oscilloscope
Remote laser monitoring and locking control via the MOGLabs Diode Laser Controller.
41 parts1GPL-3.0 - 2 layers115 × 77 mm

Questions
How big is the LFO DigiVC PCB?
It measures 101.6 × 106.7 mm and has 6 copper layers, 1.6 mm thick.
What parts does the LFO DigiVC use?
58 parts, built around the ATMEGA328P-PU, MCP4821-E/P, MCP4822-E/P and MBR150. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LFO DigiVC KiCad files?
From the Len42/Synth repository on GitHub, at the commit this page was made from: the board is modules/LFO-DigiVC/LFO-DigiVC.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the LFO DigiVC design in my own project?
Its repository states no licence, so its author keeps all rights: ask Len42 before reusing the design.
