Skip to the content
12345678

MCP4821-E/P

Microchip TechnologyExtended

-40℃~+125℃ 1 12 12LSB 2.7V~5.5V 330uA 4.5us SPI Voltage Buffer PDIP-8 Digital to Analog Converters (DAC) ROHS

Part id
microchip/MCP4821-E/P
Category
Digital To Analog Converters (DAC)
Package
PDIP-8
Pins
8
In stock
0 at JLCPCB (C640389)
Used on
11 open-source boards

Overview

The MCP4821-E/P is a digital To Analog Converter made by Microchip Technology in a PDIP-8 package with 8 pins. -40℃~+125℃ 1 12 12LSB 2.7V~5.5V 330uA 4.5us SPI Voltage Buffer PDIP-8 Digital to Analog Converters (DAC) ROHS.

PCBKit's library has its KiCad symbol (Analog_DAC:MCP4821, from KiCad's library) and its footprint (Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C640389). 11 open-source boards in 10 repositories on GitHub use it.

Symbol

1Vdd2CS3SCK4SDI5LDAC6SHDN7Vss8Vout
Analog_DAC:MCP4821From KiCad's library

Footprint

12345678
Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPadsFrom KiCad's library

Pinout

8
The pins of the MCP4821-E/P
PinNameType
1VddPower in
2CSInput
3SCKInput
4SDIInput
5LDACInput
6SHDNInput
7VssPower in
8VoutOutput

Open-source boards using it

11See all 11
  • 2 layers110.5 × 108.2 mmDexy, the printed circuit board in 3D

    Dexy

    Len42/Dexy

    DX7-inspired FM synthesis on a Pi Pico

    78 parts4
  • 2 layers99.9 × 70.5 mmMoglabs remote locking board, the printed circuit board in 3D

    Moglabs remote locking board

    atomlaser-lab/esp32-laser-oscilloscope

    Remote laser monitoring and locking control via the MOGLabs Diode Laser Controller.

    41 parts1GPL-3.0
  • 2 layers115 × 77 mmEload, the printed circuit board in 3D

    Eload

    dimtass/esp8266-web-eload

    This is a PCB/FW project for a WiFi enabled electronic load

    74 parts1
  • 2 layers65 × 56 mmRpisdr, the printed circuit board in 3D

    Rpisdr

    SietseAchterop/Batradio_old

    Software defined ratio on rpi zero

    72 parts1
  • 2 layers99.5 × 99.5 mmCarico elettronico, the printed circuit board in 3D

    Carico elettronico

    dario0603/electronic_load

    Un progetto open-source per la progettazione e simulazione di un Carico Elettronico Bipolare (Electronic Load), ideato per il test e la caratterizzazione di alimentatori, batterie e circuiti di potenza.

    92 parts
  • 4 layers60 × 40 mmClk pt, the printed circuit board in 3D

    Clk pt

    Espeer5/digir

    An open source, modular, extensible mobile digital-mode radio transceiver design.

    33 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MCP4821-E/P?

Yes. The symbol is Analog_DAC:MCP4821 and the footprint Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MCP4821-E/P?

PDIP-8, with 8 pins. Its footprint is drawn on this page.

Where is the MCP4821-E/P datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the MCP4821-E/P?

JLCPCB lists it as part C640389, with 0 in stock; the sellers' links on this page open their listings.

What can replace the MCP4821-E/P?

Parts like it in the library: the TLC5615CN by HGSEMI, the MCP4921-E/P by Microchip Technology, the MCP4822-E/P by Microchip Technology and the TLV5618AIP by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MCP4821-E/P?

11 boards in 10 repositories on GitHub; the most starred are listed on this page, with their KiCad files.