2 layers40 × 30 mm
2 layers45.7 × 68.6 mm
Hackspace bots
leigh-hackspace/hackspace-bots1Below is the information for the build of the Hackspace-Bots project
- Size
- 45.7 × 68.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 3
- Nets
- 44
- Pads
- 104
- Tracks, vias
- 58, 4
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 7 May 2023
- Updated
- 29 Nov 2023
Overview
Hackspace bots is an open-source printed circuit board by leigh-hackspace, from the leigh-hackspace/hackspace-bots repository on GitHub. It is a 2-layer board of 45.7 × 68.6 mm with 3 parts on 44 nets, routed with 58 tracks and 4 vias.
It belongs with the RP2040 boards of this library.
README
readme.mdHackspace-Bots
Below is the information for the build of the Hackspace-Bots project
Objective:
The Hackspace-Bots project aims to create a Small 3 wheeled robot that is capable of being controlled using a bluetooth interface.
Components:
The project requires a combination of hardware and software components
You will need:
Connector Board and Wires (Schematics for this board will be available once they are finished)
A basic understanding of micro-python.
and perhaps most importantly an imagination
During this project we aim to produce a step-by-step guide to building your very own hackspace bot!
** Join the Hackspace-Bots project and dive into the exciting world of robotics within a collaborative and innovative community! **
Parts
3| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Bluetooth connector | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | Bluetooth Connector |
| 1 | L298-N Motor-driver | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | Motor Connector |
| 1 | Pico | MCU_RaspberryPi_and_Boards:RPi_Pico_SMD_TH | Pico Goes here |
Questions
How big is the Hackspace bots PCB?
It measures 45.7 × 68.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Hackspace bots use?
3 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hackspace bots KiCad files?
From the leigh-hackspace/hackspace-bots repository on GitHub, at the commit this page was made from: the board is kicad-files/hackspace-bots.kicad_pcb and its schematic kicad-files/hackspace-bots.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hackspace bots design in my own project?
Its repository states no licence, so its author keeps all rights: ask leigh-hackspace before reusing the design.
Similar boards
- 2 layers51.9 × 16 mm
Passive2-rpi non standard adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
3 parts4.4kGPL-2.0 - 2 layers16.3 × 16.3 mm
- 2 layers
Sub
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
3 parts4kMIT - 2 layers85 × 30 mm
- 2 layers124.5 × 33.7 mm
- 2 layers10.5 × 83 mm
- 2 layers21.2 × 51.3 mm
Pico reset
hackclub/sprig
🍃 Learn to code by making games in a JavaScript web-based game editor.
3 parts1.1kMIT