2 layers100 × 150 mm
4 layers249.9 × 149.4 mm
INDACT baseboard
legokor/INDACT_HardwarePCBs and documentations of Karcsi
- Size
- 249.9 × 149.4 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 201
- Nets
- 285
- Pads
- 883
- Tracks, vias
- 2,243, 1,381
- Pours
- 16
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 15 Oct 2022
- Updated
- 19 Jun 2024
Overview
INDACT baseboard is an open-source printed circuit board by legokor, from the legokor/INDACT_Hardware repository on GitHub. It is a 4-layer board of 249.9 × 149.4 mm with 201 parts on 285 nets, routed with 2,243 tracks and 1,381 vias.
It is built around the SN75LBC179AD, SFH6345 and BSS123, with the P3A and P5A among its other parts. Its parts include 104 resistors, 35 ICs, 18 connectors, 16 capacitors and 4 diodes. It belongs with the computers and single-board computers boards and the ESP8266 and STM32 boards of this library.
Main components
5
SN75LBC179AD
SOIC-80℃~+70℃ 1 1 30Mbps 4.75V~5.25V 8.5mA Full-Duplex Overcurrent Protection、Thermal shutdown protection Transceiver SOIC-8 RS-485 / RS-422 ICs ROHSTexas InstrumentsRS-485 / RS-422 ICs
SFH6345
DIP-8Transistor, Photovoltaic Output OptoisolatorsVishay Intertechnology
BSS123
SOT-23-55℃~+150℃ 1 N-channel 1.4V 1.4nC@10V 100V 170mA 22pF 2pF 3.5pF 680mW 6Ω@10V、10Ω@4.5V N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETsP3A
--55℃~+125℃ 0.6pF~2.5pF 4000@250MHz 500V 6.1mm - Trimmers, Variable Capacitors ROHSKnowlesTrimmers, Variable CapacitorsP5A
--55℃~+125℃ 0.6pF~4.5pF 3000@250MHz 500V 8.36mm - Trimmers, Variable Capacitors ROHSKnowlesTrimmers, Variable Capacitors
README
RC_SHIELD/README.mdRobotController Shield PCB
Parts
201| Qty | Value | Footprint | References |
|---|---|---|---|
| 31 | SFH6345 | SFH6345:DIP762W50P254L977H451Q8 | U10, U11, U12, U13, U14, U15, U16, U17, U18, U19, U20, U21, U22, U23, U24, U25 +15 |
| 28 | 180R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R15, R16, R17, R18, R33, R34, R35, R36, R45, R46, R47, R48, R57, R58, R59, R60 +12 |
| 28 | 1K2 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R23, R24, R25, R26, R41, R42, R43, R44, R53, R54, R55, R56, R101, R102, R103, R104 +12 |
| 28 | 33R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R19, R20, R21, R22, R37, R38, R39, R40, R49, R50, R51, R52, R61, R62, R63, R100 +12 |
| 5 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C5, C6, C13, C15 |
| 4 | 560R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4, R7, R8 |
| 3 | 1000u | Capacitor_SMD:CP_Elec_16x22 | C10, C12, C14 |
| 3 | 100K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R30, R31, R32 |
| 3 | 100R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R27, R28, R29 |
| 2 | 1.5n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9, C11 |
| 2 | 11p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 2 | 120R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R5 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R12 |
| 2 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C16 |
| 2 | BSS123 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | LOGO | LOGO | G***, G*** |
| 1 | 10n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8 |
| 1 | 150R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R14 |
| 1 | 1K? | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11 |
| 1 | 200k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 20k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10 |
| 1 | 24V_STATUS | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | D3 |
| 1 | 3V3_STATUS | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | D1 |
| 1 | 4K7 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13 |
| 1 | 4u7 | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4 |
| 1 | 5V_STATUS | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | D2 |
| 1 | 5k1 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9 |
| 1 | 8MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | ALF_MOT_DRV | TerminalBlock_4Ucon:TerminalBlock_4Ucon_1x04_P3.50mm_Horizontal | J8 |
| 1 | BET_MOT_DRV | TerminalBlock_4Ucon:TerminalBlock_4Ucon_1x04_P3.50mm_Horizontal | J10 |
| 1 | DISP_CONTRAST | Potentiometer_SMD:Potentiometer_Vishay_TS53YJ_Vertical | RV1 |
| 1 | DOOR_SWITCH | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J15 |
| 1 | ESP8266-01/ESP-01 | ESP-01:XCVR_ESP8266-01_ESP-01 | U3 |
| 1 | ESTOP | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J16 |
| 1 | FAN | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J17 |
| 1 | GPIO1 | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J11 |
| 1 | GPIO2 | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J12 |
| 1 | I2C_TEMP | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J14 |
| 1 | LCD-016N002L | Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_Horizontal | U4 |
| 1 | LM3940IMP-3.3/NOPB | LM3940IMP-3:VREG_LM3940IMP-3.3_NOPB | VR1 |
| 1 | NUCLEO-F746ZG | NUCLEO-F746ZG:MODULE_NUCLEO-F746ZG_no_arduino | A1 |
| 1 | P3a | Connector_Dsub:DSUB-37_Female_Horizontal_P2.77x2.84mm_EdgePinOffset7.70mm_Housed_MountingHolesOffset9.12mm | J2 |
| 1 | P4a | Connector_Dsub:DSUB-9_Female_Horizontal_P2.77x2.84mm_EdgePinOffset4.94mm_Housed_MountingHolesOffset7.48mm | J9 |
| 1 | P5a | Connector_Dsub:DSUB-25_Female_Horizontal_P2.77x2.84mm_EdgePinOffset7.70mm_Housed_MountingHolesOffset9.12mm | J18 |
| 1 | PHI_MOT_DRV | TerminalBlock_4Ucon:TerminalBlock_4Ucon_1x04_P3.50mm_Horizontal | J6 |
| 1 | POWER_SUPPLY | TerminalBlock_4Ucon:TerminalBlock_4Ucon_1x04_P3.50mm_Horizontal | J4 |
| 1 | R_MOT_DRV | TerminalBlock_4Ucon:TerminalBlock_4Ucon_1x04_P3.50mm_Horizontal | J3 |
| 1 | SN75LBC179AD | SN75LBC179AD:SOIC127P599X175-8N | U2 |
| 1 | SPI | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J13 |
| 1 | STM32F030K6Tx | Package_QFP:LQFP-32_7x7mm_P0.8mm | U1 |
| 1 | SWD | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | SW_Push | Button_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | SW1 |
| 1 | TH_MOT_DRV | TerminalBlock_4Ucon:TerminalBlock_4Ucon_1x04_P3.50mm_Horizontal | J7 |
| 1 | TP_24V | TestPoint:TestPoint_Pad_2.0x2.0mm | TP1 |
| 1 | TP_3V3 | TestPoint:TestPoint_Pad_2.0x2.0mm | TP5 |
| 1 | TP_5V | TestPoint:TestPoint_Pad_2.0x2.0mm | TP4 |
| 1 | TP_COM24 | TestPoint:TestPoint_Pad_2.0x2.0mm | TP2 |
| 1 | TP_COM5 | TestPoint:TestPoint_Pad_2.0x2.0mm | TP3 |
| 1 | TP_ESP01_CHPD | TestPoint:TestPoint_Pad_2.0x2.0mm | TP7 |
| 1 | TP_ESP01_RST | TestPoint:TestPoint_Pad_2.0x2.0mm | TP6 |
| 1 | TP_LCD_Contrast | TestPoint:TestPoint_Pad_2.0x2.0mm | TP9 |
| 1 | TP_LCD_ENA | TestPoint:TestPoint_Pad_2.0x2.0mm | TP8 |
| 1 | TP_SPI_NSS | TestPoint:TestPoint_Pad_2.0x2.0mm | TP10 |
| 1 | WIFI-OP | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | D4 |
| 1 | Z_MOT_DRV | TerminalBlock_4Ucon:TerminalBlock_4Ucon_1x04_P3.50mm_Horizontal | J5 |
The 196 most common of 201 parts.
Questions
How big is the INDACT baseboard PCB?
It measures 249.9 × 149.4 mm and has 4 copper layers, 1.6 mm thick.
What parts does the INDACT baseboard use?
201 parts, built around the SN75LBC179AD, SFH6345, BSS123 and P3A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the INDACT baseboard KiCad files?
From the legokor/INDACT_Hardware repository on GitHub, at the commit this page was made from: the board is RC_SHIELD/INDACT_baseboard.kicad_pcb and its schematic RC_SHIELD/INDACT_baseboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the INDACT baseboard design in my own project?
Its repository states no licence, so its author keeps all rights: ask legokor before reusing the design.
Similar boards
- 8 layers118 × 100 mm
Kria k26-devboard
antmicro/kria-k26-devboard
Open source AMD Xilinx Kria UltraScale+ SoM baseboard
660 parts83Apache-2.0 - 4 layers44 × 64 mm
JTAGProgrammer
anthony-bernaert/ftdi-jtag-programmer
FTDI-based JTAG Programmer Circuit for FPGAs
122 parts77CERN-OHL-P-2.0 - 2 layers90 × 60 mm
Gotek Floppy Disk Emulator V2
RichardRozehnal/Gotek-Floppy-Disk-Emulator-V2
Floppy disk emulator for old computers and machines, Amiga, Atari ST, etc.
66 parts66GPL-3.0 - 8 layers110 × 90 mm
Lpddr4-test board
antmicro/lpddr4-test-board
Experimental development board interfacing Xilinx Kintex-7 FPGA with LPDDR4 SDRAM
497 parts57Apache-2.0 - 2 layers85 × 50 mm
APPMC
tdjastrzebski/All-Purpose-Power-Micro-Controller
General purpose power controller, capable of driving soldering irons using different voltages and probe types.
117 parts40 - 4 layers80.1 × 22.2 mm
M2-smart iot module
antmicro/m2-smart-iot-module
https://antmicro.com/blog/2021/08/open-hardware-smart-m2-radio-module-for-iot/
212 parts30Apache-2.0 - 4 layers19 × 111.1 mm
Gliss main
BelaPlatform/gliss-hardware
You can find the source KiCad files for the Gliss module in this repository. This project is open hardware and under the Creative Commons Share Alike license 4.0.
107 parts18