
Clock Controller
Fish-in-a-Barrel/Nixie
This is my Nixie clock project. It was created as an excuse to learn more about electronics and it touches on power circuits, microcontrollers, serial communications, and more.

EXO PCB V1 is an open-source printed circuit board by leegeono, from the leegeono/EXO_PCB_V1 repository on GitHub. It is a 2-layer board of 236 × 85.7 mm with 73 parts on 131 nets, routed with 302 tracks and 527 vias.
It is built around the SMD220PL-TP and XT30PW-M. Its parts include 34 capacitors, 15 resistors, 9 connectors, 7 inductors and 2 diodes. It belongs with the RP2040 boards of this library.
First prototype PCB for motor control experiments.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C14, C23, C27, C28, C32, C36, C37 |
| 6 | 100pF | Capacitor_SMD:C_0603_1608Metric | C1, C3, C5, C7, C8, C9 |
| 6 | 10kΩ | Resistor_SMD:R_0603_1608Metric | R7, R8, R9, R10, R11, R12 |
| 6 | 220pF | Capacitor_SMD:C_0603_1608Metric | C2, C4, C6, C10, C11, C12 |
| 6 | 220Ω | Resistor_SMD:R_1206_3216Metric | R1, R2, R3, R4, R5, R6 |
| 6 | 4.7 uH | Custom_L:WE-PD_1260_1245_1280_121054 | L1, L2, L3, L4, L5, L6 |
| 6 | 470pF | Capacitor_SMD:C_0603_1608Metric | C17, C18, C19, C20, C21, C22 |
| 3 | 10uF | Capacitor_SMD:C_0805_2012Metric | C15, C29, C30 |
| 2 | 220uF | Custom_C:UPM1J221MHD | C13, C35 |
| 2 | 5569-04 | Custom_Connector:5569-04 | J5, J6 |
| 2 | 70247-1051 | Custom_Connector:70247-1051 | J7, J8 |
| 1 | 10pF | Capacitor_SMD:C_0603_1608Metric | C25 |
| 1 | 10uH | Custom_L:SRN5040TA100MP | L7 |
| 1 | 12KΩ | Resistor_SMD:R_0603_1608Metric | R17 |
| 1 | 2.2KΩ | Resistor_SMD:R_0603_1608Metric | R16 |
| 1 | 2.2nF | Capacitor_SMD:C_0603_1608Metric | C26 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric | C31 |
| 1 | 25A | Custom_Fuse:0683G925001 | F1 |
| 1 | 28KΩ | Resistor_SMD:R_0603_1608Metric | R15 |
| 1 | 8.2nF | Capacitor_SMD:C_0603_1608Metric | C24 |
| 1 | ESCON_1 | Custom_Devices:Escon 50,8 | J2 |
| 1 | ESCON_2 | Custom_Devices:Escon 50,8 | J1 |
| 1 | SMD220PL-TP | Custom_Diode:SMD220PLTP | D2 |
| 1 | TPS54232DR | Custom_IC:TPS54232 | J3 |
| 1 | TVS 33V | Custom_Diode:SMBJ33A | D1 |
| 1 | Teensy 4.1 | Custom_Devices:Teensy41 | U1 |
| 1 | XT30PW-M | Custom_Connector:XT30PW-M | J4 |
| 1 | nano rp2040 | Custom_Devices:nano_rp2040 | j9 |
The 69 most common of 73 parts.

Fish-in-a-Barrel/Nixie
This is my Nixie clock project. It was created as an excuse to learn more about electronics and it touches on power circuits, microcontrollers, serial communications, and more.




nasheed-x/aether
Aether is a versatile flight computer for testing flight hardware and software, focusing on sensor fusion to monitor rocket states and interface with on-board systems.

Kelvin-Ziqi-Zhao/drone-current-sensor-board
High current sensor board for battery+capacitor power supply system

ss1-ops/robotic-arm-5-digit-manipulator
BCN3D Moveo 6-DOF arm + custom Aero Hand gripper. ROS 2 Jazzy, ESP32-S3 micro-ROS, vision pick-and-place, full hardware/firmware/software stack.

Gepetto/MOTKIN-PCB
Low cost PMSM using RPI Pico, external ADC and integrated mos+driver+current sensing.
It measures 236 × 85.7 mm and has 2 copper layers, 1.6 mm thick.
73 parts, built around the SMD220PL-TP and XT30PW-M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the leegeono/EXO_PCB_V1 repository on GitHub, at the commit this page was made from: the board is V1.kicad_pcb and its schematic Filter1_Circuit.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask leegeono before reusing the design.