Skip to the content
6 layers100 × 70 mmCanardBoard, the printed circuit board in 3D

Hardware monorepo avionics PCB

Size
100 × 70 mm
Copper layers
6
Thickness
1.63 mm
Parts
280
Nets
242
Pads
1,032
Tracks, vias
2,033, 863
Pours
80
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
11 Sep 2018
Updated
8 Nov 2026

Overview

CanardBoard is an open-source printed circuit board by waterloo-rocketry, from the waterloo-rocketry/canhw repository on GitHub, published under the GPL-3.0 licence. It is a 6-layer board of 100 × 70 mm with 280 parts on 242 nets, routed with 2,033 tracks and 863 vias.

It is built around the MS5611-01BA03, MX25L25645GM2I-08G and TVS3300DRV, with the EMIF06-MSD02N16, LSM303AGR and RB520S30T1G-HXY among its other parts. Its parts include 92 capacitors, 73 resistors, 22 diodes, 19 ICs and 10 transistors.

Main components

12

README

README.md

RocketCAN Hardware

This repository tracks the hardware development for the RocketCAN project. All schematics, board designs, and fabrication files are tracked in this repository. The corresponding software running on each board can be found in the cansw_* repositories. The CAN driver library used is tracked in the canlib repository.

All hardware files were developed in KiCAD.

System Architecture

The RocketCAN project is an extension of the 2018 Flight Instrumentation project. The functions of the original Flight Instrumentation electronics are decoupled into several single-function modules connected by a Controller Area Network (CAN bus). The 2019 RocketCAN configuration consists of a radio board, an injector valve driver, a vent valve driver, a flight sensor suite, a system logger, and a GPS receiver. The modules freely share information over the CAN bus, allowing all modules to access resources such as the radio transceiver and sensor module. This minimizes the amount of component and functionality duplication, as well as power consumption (especially by the radio module). Power consumption is reduced further by allowing the radio board to control power to the rest of the system, forcing it into a low-power state while the rocket is idle. The resulting PCBs are also significantly smaller and easier to mount inside the rocket. Finally, RocketCAN’s configuration is easily extensible. A new subsystem simply needs to include a CAN communication module, after which it can communicate with all other boards on the bus. Potential extensions such as a flight computer, a state estimation module, or an air braking system would be able to use existing sensor data without implementing their own independent sensor suite.

topo

At present, the radio board integrates with Waterloo Rocketry's Remote Launch Control System (RLCS), from which it receives instructions. It is also capable of broadcasting sensor data to RLCS. The radio board communicates with the tower-side box of RLCS, which relays the data to the client-side box at mission control.

comms

The CAN protocol was chosen for its high data rate, priority-based arbitration, and abundance of inexpensive hardware. The bus can safely be used by many boards at once without the risk of a low-priority message (eg. sensor data) preempting a high-priority message (eg. valve command). Microcontrollers with CAN modules, stand-alone CAN modules, and CAN transceivers are all widely available, making it cheap and simple to add CAN functionality to a subsystem.

Further descriptions and instructions for using each individual board are available in the README in the relevant board's directory.

Parts

280
QtyValueFootprintReferences
340.1uFCapacitor_SMD:C_0402_1005MetricC1, C10, C11, C14, C16, C18, C21, C22, C23, C24, C33, C34, C37, C40, C48, C50 +18
18100kResistor_SMD:R_0402_1005MetricR13, R15, R17, R19, R21, R23, R35, R36, R39, R40, R50, R52, R54, R55, R56, R59 +2
140.1uFCapacitor_SMD:C_0603_1608MetricC19, C20, C25, C26, C51, C52, C53, C54, C70, C71, C85, C86, C87, C88
1410kResistor_SMD:R_0402_1005MetricR1, R2, R8, R14, R16, R33, R34, R37, R38, R41, R42, R47, R48, R49
910uFCapacitor_SMD:C_1210_3225MetricC35, C36, C38, C41, C43, C45, C68, C69, C79
922uFCapacitor_SMD:C_0805_2012MetricC12, C17, C47, C56, C63, C65, C74, C76, C89
8RB520S30T1GDiode_SMD:D_SOD-523D4, D5, D6, D7, D13, D14, D15, D16
8SolderJumper_2_OpenJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8
710nFCapacitor_SMD:C_0402_1005MetricC15, C27, C28, C29, C30, C58, C59
6M3MountingHole:MountingHole_3.2mm_M3_PadH1, H2, H3, H4, H5, H6
51kResistor_SMD:R_0402_1005MetricR63, R64, R69, R74, R75
51uFCapacitor_SMD:C_0402_1005MetricC3, C5, C13, C72, C91
4100RResistor_SMD:R_0402_1005MetricR4, R5, R27, R28
410AFuse:Fuse_1206_3216MetricF3, F4, F5, F6
4120RResistor_SMD:R_0805_2012MetricR43, R44, R60, R65
42.2kResistor_SMD:R_0402_1005MetricR6, R7, R22, R24
420N06Dcanardboard:Infineon-PG-TSDSON-8Q7, Q8, Q9, Q10
4220uFcanardboard:A786MW227M1HLAV011C39, C42, C44, C46
4LM74700Package_TO_SOT_SMD:SOT-23-6U9, U10, U11, U12
4SIR626DP-T1-RE3canardboard:PowerPAK_SO-8_SingleQ1, Q2, Q3, Q4
4SMAJ28ADiode_SMD:D_SMAD8, D9, D11, D12
30.1uFCapacitor_SMD:C_0805_2012MetricC31, C32, C90
30RResistor_SMD:R_0402_1005MetricR25, R26, R66
319.1kResistor_SMD:R_0402_1005MetricR51, R53, R68
32.2uFCapacitor_SMD:C_0402_1005MetricC2, C4, C49
3330RResistor_SMD:R_0402_1005MetricR3, R72, R73
3REDLED_SMD:LED_0603_1608MetricD20, D21, D22
3TCAN3413DDFRcanardboard:TCAN3413DDFRU6, U13, U16
21.5AFuse:Fuse_1206_3216MetricF7, F8
210RResistor_SMD:R_0402_1005MetricR31, R32
21mRResistor_SMD:R_Shunt_Vishay_WSKW0612R29, R30
220AFuse:Fuse_1206_3216MetricF1, F2
22N7002Wcanardboard:2N7002WQ5, Q6
23.16kResistor_SMD:R_0402_1005MetricR18, R20
247uFCapacitor_SMD:C_1210_3225MetricC77, C78
25.1kResistor_SMD:R_0402_1005MetricR45, R46
25mResistor_SMD:R_0805_2012MetricR70, R71
2ESDCAN01-2BLYPackage_TO_SOT_SMD:SOT-23D10, D17
2INA180A3Package_TO_SOT_SMD:SOT-23-5U19, U20
2LM749x0canardboard:LM749x0U4, U5
2SMAJ28CADiode_SMD:D_SMAD2, D3
2SMF15CADiode_SMD:D_SMFD18, D19
2TVS3300DRVPackage_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mmU3, U23
2XT30PW-Mcanardboard:AMASS_XT30PW-MJ3, J4
11374027canardboard:1374027J12
11MResistor_SMD:R_0805_2012MetricR76
1220nFCapacitor_SMD:C_0402_1005MetricC64
133pFCapacitor_SMD:C_0402_1005MetricC75
134kResistor_SMD:R_0402_1005MetricR57
13V3TestPoint:TestPoint_Pad_D1.0mmTP9
14.7uHcanardboard:SRP7050WAL1
143.2kResistor_SMD:R_0402_1005MetricR62
15.1kResistor_SMD:R_1206_3216MetricR9
15AFuse:Fuse_1206_3216MetricF9
15VTestPoint:TestPoint_Pad_D1.0mmTP10
1681RResistor_SMD:R_0402_1005MetricR58
1ASE-4.000MHZ-L-C-TOscillator:Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mmX1
1BLM15AG121SN1DCapacitor_SMD:C_0402_1005MetricFB1
1EMIF06-MSD02N16canardboard:EMIF06MSD02N16U22
1G125-MH104M4-04AD000Pcanhw_footprints:connector_Harwin_G125-MH104M4-04AD000PJ10
1GNDTestPoint:TestPoint_Loop_D2.50mm_Drill1.0mmTP13
1IMU_SCLTestPoint:TestPoint_Pad_D1.0mmTP14
1IMU_SDATestPoint:TestPoint_Pad_D1.0mmTP15
1LED_RGBAcanardboard:EAST1616RGBB2D1
1LMR51460canardboard:LMR51460U17
1LOGOTeam_Logo:Logo_SilkScreen_5mmG***
1LOGOTeam_Logo:Logo_Horizontal_Silkscreen_10mmG***
1LSM303AGRPackage_LGA:LGA-12_2x2mm_P0.5mmU15
1LSM6DSV32XTRcanardboard:LSM6DSV32XTRU21
1MS5611-01BAPackage_LGA:LGA-8_3x5mm_P1.25mmU2
1MX25L25645GM2I-08Gcanardboard:MX25L25645GM2I-08GU8
1Micro_SD_Cardcanardboard:microSD_HC_Molex_47219-2001J2
1Motor 1canardboard:G125MH10805M41AD1ADPJ6
1Motor 2canardboard:G125MH10805M41AD1ADPJ5
1Motor 3canardboard:G125MH10805M41AD1ADPJ8
1Motor 4canardboard:G125MH10805M41AD1ADPJ7
1Movella-1374028canardboard:Movella-1374028J11
1RCAN_HTestPoint:TestPoint_Pad_D1.0mmTP5
1RCAN_LTestPoint:TestPoint_Pad_D1.0mmTP6
1RCAN_RXTestPoint:TestPoint_Pad_D1.0mmTP7

The 262 most common of 280 parts.

More from waterloo-rocketry/canhw

12
  • 4 layers63.4 × 66.3 mmLTT, the printed circuit board in 3D

    LTT

    waterloo-rocketry/canhw

    Hardware monorepo avionics PCB

    110 parts15GPL-3.0
  • 2 layers56.9 × 61.3 mmPropulsionBoard, the printed circuit board in 3D

    PropulsionBoard

    waterloo-rocketry/canhw

    Hardware monorepo avionics PCB

    104 parts15GPL-3.0
  • 4 layers45.2 × 70.6 mmInjector sensor hub, the printed circuit board in 3D

    Injector sensor hub

    waterloo-rocketry/canhw

    Hardware monorepo avionics PCB

    87 parts15GPL-3.0
  • 4 layers33 × 58.4 mmRocket power board, the printed circuit board in 3D

    Rocket power board

    waterloo-rocketry/canhw

    Hardware monorepo avionics PCB

    86 parts15GPL-3.0
  • 4 layers68.9 × 41.5 mmRemote arming, the printed circuit board in 3D

    Remote arming

    waterloo-rocketry/canhw

    Hardware monorepo avionics PCB

    69 parts15GPL-3.0
  • 2 layers58.4 × 45.7 mmInjector sensor hub, the printed circuit board in 3D

    Injector sensor hub

    waterloo-rocketry/canhw

    Hardware monorepo avionics PCB

    63 parts15GPL-3.0
  • 4 layers45.2 × 32.5 mmLogger, the printed circuit board in 3D

    Logger

    waterloo-rocketry/canhw

    Hardware monorepo avionics PCB

    62 parts15GPL-3.0
  • 4 layers50 × 43.5 mmCAN relay, the printed circuit board in 3D

    CAN relay

    waterloo-rocketry/canhw

    Hardware monorepo avionics PCB

    56 parts15GPL-3.0
  • 2 layers83.8 × 62.2 mmPicdev, the printed circuit board in 3D

    Picdev

    waterloo-rocketry/canhw

    Hardware monorepo avionics PCB

    53 parts15GPL-3.0
  • 2 layers58.4 × 61 mmTelemetry transmitter, the printed circuit board in 3D

    Telemetry transmitter

    waterloo-rocketry/canhw

    Hardware monorepo avionics PCB

    47 parts15GPL-3.0
  • 2 layers54.3 × 28.9 mmGps 2, the printed circuit board in 3D

    Gps 2

    waterloo-rocketry/canhw

    Hardware monorepo avionics PCB

    46 parts15GPL-3.0

Similar boards

  • 4 layers55 × 100.5 mmOSS Radio Hardware Design, the printed circuit board in 3D

    OSS Radio Hardware Design

    Arkos-Engineering/HT-15_hardware

    We can split this out into separate repos later, right now its very convenient to have everything here.

    256 parts72
  • 4 layers48.8 × 55.3 mmFPGA Lockin, the printed circuit board in 3D

    FPGA Lockin

    Cstubbs56/FPGA-Lockin-Amplifier-PCB

    129 parts
  • 4 layers100 × 60 mmVibration Board, the printed circuit board in 3D

    Vibration Board

    waterloo-rocketry/payload-accelerometer-

    65 parts
  • 4 layers25 × 25 mmLaserCAN Board, the printed circuit board in 3D

    LaserCAN Board

    GrappleRobotics/LaserCAN

    59 parts3GPL-3.0
  • 2 layers30 × 51 mmMpcie gnss, the printed circuit board in 3D

    Mpcie gnss

    neggles/mpcie-gnss

    This is a little miniPCIe card I designed to hold a Quectel LC86L GNSS module, with a timepulse header and a backup supercap.

    27 parts2CC-BY-SA-4.0
  • 2 layers66 × 25.4 mmTI Ember, the printed circuit board in 3D

    TI Ember

    Grippy98/TI-Ember-SBC

    TI Ember SBC - Arduino Pro Compatible Form Factor using AM625 SoC

    268 parts1MIT
  • 4 layers101 × 175 mmPower PCB, the printed circuit board in 3D

    Power PCB

    ICRS/IPRL-Electronics-Hardware

    96 parts1
  • 4 layers65 × 56 mmDashHat, the printed circuit board in 3D

    DashHat

    michaelyoyo/piDashHat

    Pi Hat for an automotive dashboard

    154 parts1

Questions

How big is the CanardBoard PCB?

It measures 100 × 70 mm and has 6 copper layers, 1.63 mm thick.

What parts does the CanardBoard use?

280 parts, built around the MS5611-01BA03, MX25L25645GM2I-08G, TVS3300DRV and EMIF06-MSD02N16. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the CanardBoard KiCad files?

From the waterloo-rocketry/canhw repository on GitHub, at the commit this page was made from: the board is CanardBoard/STM_Sensor_Board/CanardBoard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the CanardBoard design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).