
Breadboard
Ledger-Donjon/scaffold
Donjon hardware tool for circuits security evaluation

Donjon hardware tool for circuits security evaluation
Esp32 is an open-source printed circuit board by Ledger-Donjon, from the Ledger-Donjon/scaffold repository on GitHub, published under the LGPL-3.0 licence. It is a 2-layer board of 33 × 91.4 mm with 54 parts on 142 nets, routed with 389 tracks and 46 vias.
It is built around the GD25Q32C. Its parts include 4 connectors, 3 capacitors, 3 ICs and 1 crystal. It belongs with the ESP32 boards of this library.
When performing hardware security evaluation of integrated circuits and embedded platforms, the first step is to setup the device to be able to automate tests, retrieve results and trigger instruments to perform measurements or inject faults. Scaffold is an electronic motherboard designed to quickly setup, instrument and test cirtcuits. The board can be controlled through USB using a Python3 API, enabling easy development of tests. All the project is Open-Hardware and Open-Source.

The FPGA architecture runs at 100 MHz and embeds many peripherals:
The board also integrates an 11X analog amplifier with 200 MHz bandwidth for power measurement. The on-board shunt resistor can be tuned from 0 to 100 Ohms.
Scaffold is able to operate from 1.5V to 3.3V devices: power supplies and I/O bank voltage can be tuned thanks to adjustable voltage regulators. Scaffold can be powered from USB or external power supplies.
Four special I/Os can generate 5V pulses, which are compatible with ALPhANOV PDM laser sources (50 Ohm TTL).
All the files required to fabricate the board are included in the repository. If you do not wish to build it yourself, you can request for quotation by sending a mail to scaffold@ledger.fr (only for Europe or USA shipping).
Python3 library can be installed using pip:
pip3 install donjon-scaffoldAPI documentation is available on Read the Docs.
Scaffold is released under GNU Lesser General Public Licence version 3 (LGPLv3). See COPYING and COPYING.LESSER for license details.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 42 | TestPoint | mykicadlibs:TEST_BREADBOARD_RECTANGULAR | TP1, TP2, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18, TP19, TP20, TP21, TP22, TP23 +26 |
| 2 | 12p | Capacitor_SMD:C_0603_1608Metric | C2, C3 |
| 2 | Conn_02x10_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x10_P2.54mm_Vertical | J1, J2 |
| 2 | ESP32 | Package_DFN_QFN:QFN-48-1EP_6x6mm_P0.4mm_EP4.3x4.3mm | U1, U3 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 40M | Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm | Y1 |
| 1 | Conn_01x01 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J4 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J3 |
| 1 | DUNGEON_LOGO | mykicadlibs:donjon-2000 | LOGO1 |
| 1 | GD25Q32C | Package_SO:SOP-8_5.28x5.23mm_P1.27mm | U2 |

Ledger-Donjon/scaffold
Donjon hardware tool for circuits security evaluation

Ledger-Donjon/scaffold
Donjon hardware tool for circuits security evaluation

Ledger-Donjon/scaffold
Donjon hardware tool for circuits security evaluation

Ledger-Donjon/scaffold
Donjon hardware tool for circuits security evaluation

Ledger-Donjon/scaffold
Donjon hardware tool for circuits security evaluation



BHDynamics/dynossat-edu-obc
DynOSSAT-EDU, educational PocketQube satellite On-Board Computer files





MaltWhiskey/Mega-Cube
16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver

It measures 33 × 91.4 mm and has 2 copper layers, 1.6 mm thick.
54 parts, built around the GD25Q32C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Ledger-Donjon/scaffold repository on GitHub, at the commit this page was made from: the board is daughter-boards/esp32/esp32.kicad_pcb and its schematic daughter-boards/atecc/atecc.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the LGPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).