Skip to the content
2 layers114 × 95 mmRight half, the printed circuit board in 3D

Split 50% keyboard with blackberry trackball

Size
114 × 95 mm
Copper layers
2
Thickness
1.6 mm
Parts
69
Nets
54
Pads
196
Tracks, vias
371, 20
Pours
2
Routed
Yes
KiCad
KiCad 4
Created
1 Feb 2018
Updated
26 Feb 2019

Overview

Right half is an open-source printed circuit board by leanNiki, from the leanNiki/baller-kb repository on GitHub. It is a 2-layer board of 114 × 95 mm with 69 parts on 54 nets, routed with 371 tracks and 20 vias.

Its parts include 30 diodes, 30 switches, 3 ICs and 2 resistors. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.

README

README.md

THE WIRING IS WRONG, THE TEENSY PINS ARE NOT CORRECT

baller-kb

Split 50% keyboard with blackberry trackball

Parts

  • 2 PCBs identical
  • 1 Blackberry Trackball Breakout Module
  • 2 Teensy 2.0
  • 60 Mx Blue Switches
  • 60 Diodes 1N4148TACT-ND
  • 4 5K Resistors (I2C) 4.99KXBK-ND
  • 2 Phono Jack TRRS (FC68125)
  • ~50 Pin Headers (Teensy) (or wire?)
  • TRRS Cable
  • Mini USB-Cable
  • 60 Switches
  • 60 Keycaps
  • wire (trackball module)

Parts

69
QtyValueFootprintReferences
30DIODEKeyboard:DIODED1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +14
30SW_PUSH_SMALL_HKeyboard:CHERRY_PLATE_100HSW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +14
4MountingHole_7x5Keyboard:MountingHole_7x5REF1, REF2, REF3, REF4
2RESISTORKeyboard:RESISTORR1, R2
1Blackberry_TrackballKeyboard:bb_trackballU3
1TEENSY2.0Keyboard:TEENSY_2.0U2
1TRRS_Jacktrs:4pin35mmAudioU1

Similar boards

  • 2 layers117.3 × 54.5 mmMegapad, the printed circuit board in 3D

    Megapad

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    69 parts915
  • 2 layers100 × 96 mmBacklight, the printed circuit board in 3D

    Backlight

    jackw01/scanlight

    A better light source for scanning color negative film

    69 parts397CERN-OHL-W-2.0
  • 2 layers135.9 × 102.2 mmErgo42, the printed circuit board in 3D

    Ergo42

    Biacco42/Ergo42

    7x4 ortho linear split keyboard - The Answer to the Ultimate Question of Life, the Universe, and at least Keyboards

    69 parts218
  • 2 layers104.1 × 71.1 mmMinifp, the printed circuit board in 3D

    Minifp

    eigenco/frankenpi

    This is an experimental project to connect Raspberry Pi with the help of cheap Cyclone IV FPGA board to 8-bit ISA bus to act as multiple different devices.

    69 parts139
  • 2 layers90 × 140 mmDrumkid, the printed circuit board in 3D

    Drumkid

    mattybrad/drumkid

    Version 4 was the first successful working design, with full code, schematics, Gerbers, etc available on GitHub.

    69 parts137
  • 2 layers120 × 60 mmOverglade Badges, the printed circuit board in 3D

    Overglade Badges

    KaiPereira/Overglade-Badges

    NFC hackathon badges for the Overglade game jam in Singapore!

    69 parts126
  • 2 layers142 × 20 mmDeskController, the printed circuit board in 3D

    DeskController

    BerkeleyHCI/PolymorphicBlocks

    A Python-based hardware description language for PCBs for higher-level (block-diagram / system-architecture level) PCB design through libraries of directly reusable subcircuit generators.

    69 parts94BSD-3-Clause
  • 2 layers163.1 × 111.9 mmSpleeb, the printed circuit board in 3D

    Spleeb

    chrishoage/spleeb

    A split keyboard... or spleeb

    69 parts87MIT

Questions

How big is the Right half PCB?

It measures 114 × 95 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Right half use?

69 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Right half KiCad files?

From the leanNiki/baller-kb repository on GitHub, at the commit this page was made from: the board is right_half.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Right half design in my own project?

Its repository states no licence, so its author keeps all rights: ask leanNiki before reusing the design.