

SamplePhaseShifter
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 10
- Pads
- 38
- Tracks, vias
- 32, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 24 Jan 2021
- Updated
- 2 May 2021
Overview
SamplePhaseShifter is an open-source printed circuit board by lballard9, from the lballard9/GTRF-PCB repository on GitHub. It is a 2-layer board with 13 parts on 10 nets, routed with 32 tracks and 0 vias.
It is built around the LMV116MF and SMA-J-P-H-ST-EM1. Its parts include 5 resistors, 5 connectors, 2 capacitors and 1 IC.
Main components
2LMV116MF
SOT-23-5-40℃~+85℃ 1 2.7V~12V 20mA 400nA 40V/us 40nV/√Hz@100kHz 45MHz 500nA 5mV 5uV/℃ 600uA 88dB Rail-to-rail output SOT-23-5 Precision Op Amps ROHSTexas InstrumentsPrecision Op AmpsSMA-J-P-H-ST-EM1
SMD-65℃~+125℃ 1 20GHz 335V 50Ω Board Side Inner pin Positive Pin SMA SMD Coaxial Connectors (RF) ROHSSamtecCoaxial Connectors (RF)
README
README.mdGTRF-PCB
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10k | Resistor_SMD:R_0805_2012Metric | R3, R4, R6 |
| 3 | SMA-J-P-H-ST-EM1 | AdditionalLibs:SAMTEC_SMA-J-P-H-ST-EM1 | J1, J2, J5 |
| 2 | 2.7k | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | 5.6p | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3, J4 |
| 1 | LMV116MF | SOT95P280X145-5N | U1 |
More from lballard9/GTRF-PCB
12- 4 layers113 × 70.1 mm

- 2 layers41 × 29 mm

- 2 layers17.8 × 35.1 mm

- 4 layers46 × 27.3 mm

- 2 layers58.6 × 45.7 mm

- 2 layers81.3 × 48.3 mm

- 2 layers94 × 50.8 mm

- 2 layers27.9 × 33 mm

- 2 layers24.8 × 16.9 mm

- 2 layers25.4 × 38.7 mm

- 2 layers50.8 × 54.6 mm

- 2 layers45.7 × 40.6 mm

Similar boards
- 2 layers50.8 × 22.9 mm

Waveform Gen ADSR
CedarGroveStudios/PCB_AD9833_ADSR_Featherwing
An amplitude-controlled version of the original AD9833 Waveform Generator FeatherWing.
28 parts2 - 2 layers103.6 × 61.7 mm

Board ESP MikroBus V1
thingsat/tinygs_2g4station
HW and FW of a TinyGS 2.4 GHz LoRa ground station https://tinygs.com/
26 parts30 - 8 layers126 × 117 mm

- 4 layers68.6 × 58.4 mm

- 4 layers127 × 101.6 mm

- 6 layers40 × 15 mm

- 2 layers65 × 23.5 mm

Picise
ckuhtz/picise
Prototype for a time / location GNSS accessory for a Raspberry Pi 40-pin GPIO.
39 partsCC-BY-SA-4.0 - 2 layers31 × 23.5 mm

Expansion board RFM95
EvoLuvDaP/Expansion_board_RFM95
A single-layer PCB design suitable for educational testing purposes.
5 parts
Questions
What parts does the SamplePhaseShifter use?
13 parts, built around the LMV116MF and SMA-J-P-H-ST-EM1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SamplePhaseShifter KiCad files?
From the lballard9/GTRF-PCB repository on GitHub, at the commit this page was made from: the board is Projects/SamplePhaseShifter/SamplePhaseShifter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the SamplePhaseShifter design in my own project?
Its repository states no licence, so its author keeps all rights: ask lballard9 before reusing the design.