2 layers27.9 × 31.2 mm
Board Mikrobus Lambda80C
thingsat/tinygs_2g4station
HW and FW of a TinyGS 2.4 GHz LoRa ground station https://tinygs.com/
5 parts30
2 layers103.6 × 61.7 mm
Board ESP MikroBus V1
thingsat/tinygs_2g4station30HW and FW of a TinyGS 2.4 GHz LoRa ground station https://tinygs.com/
- Size
- 103.6 × 61.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 26
- Nets
- 44
- Pads
- 156
- Tracks, vias
- 445, 31
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 22 Jun 2021
- Updated
- 18 Mar 2026
Overview
Board ESP MikroBus V1 is an open-source printed circuit board by thingsat, from the thingsat/tinygs_2g4station repository on GitHub. It is a 2-layer board of 103.6 × 61.7 mm with 26 parts on 44 nets, routed with 445 tracks and 31 vias.
It is built around the SMA-J-P-H-ST-EM1 and U.FL-R-SMT(01). Its parts include 2 capacitors and 1 IC. It belongs with the ESP32 boards of this library.
Main components
2README
Board_Mikrobus_NiceRF_1280_TCXO/README.mdMikrobus adapter for NiceRF 1280 TCXO module
Designed by Nicolas Nohlier (F5MDY), CSUT & LAAS.
Parts
26| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | Grove | Grove:Grove_4pin-2.00mm | I2C1, IO_32/33, UART0 |
| 2 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | 3.3, 5V1 |
| 2 | Jumper_NC_Dual | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | Jmp_Rx1, Jmp_Tx1 |
| 2 | LOGO | Logos-image:Image-Csug_10x10 | G***, G*** |
| 2 | MIKROE-924 | MIKROE-924:MIKROE924 | MiKroBus_0, MiKroBus_1 |
| 2 | SMA-J-P-H-ST-EM1 | SMA-J-P-H-ST-EM1:SAMTEC_SMA-J-P-H-ST-EM1 | SMA_1, SMA_2 |
| 2 | U.FL-R-SMT(01) | U:HRS_U.FL-R-SMT(01) | UFL_1, UFL_2 |
| 1 | C | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | C1 |
| 1 | C | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | Conn_02x19_Top_Bottom | test connecteur:conn_2x19_2.54mm_top_bot | Connector_2x19 |
| 1 | ESP32-DEVKITC-32D | ESP32-DEVKITC-32D:MODULE_ESP32-DEVKITC-V4-32D | U1 |
| 1 | LOGO | Logos-image:QRCode_ThingSat_14.5x14.5 | G*** |
The 20 most common of 26 parts.
More from thingsat/tinygs_2g4station
3- 2 layers27.4 × 30.7 mm
Board mikrobus Nice1280 TCXO
thingsat/tinygs_2g4station
HW and FW of a TinyGS 2.4 GHz LoRa ground station https://tinygs.com/
4 parts30 - 2 layers27.4 × 30.7 mm
Board mikrobus E28
thingsat/tinygs_2g4station
HW and FW of a TinyGS 2.4 GHz LoRa ground station https://tinygs.com/
4 parts30
Similar boards
- 4 layers100.9 × 71.5 mm
Raccoon
barbinbrad/raccoon
Car Hacking PCB and firmware for a USB to CAN interface, with support for 4 CAN transceivers and an optional NEO-MP8 GNSS module.
56 parts16MIT - 4 layers28 × 28 mm
- 4 layers117 × 77 mm
ProdDeck
arsovskiteodor/A.ProdDeck
Open-hardware macro pad (WIP): custom KiCad PCB with keys, encoders and a fader, plus firmware and a desktop configurator
69 parts - 4 layers55.5 × 32 mm
SAFE ROOM
dibreyjonatan/SAFE-ROOM
SAFE ROOM est une dispositif électronique qui permet de connaitre en temps réel, les conditions d'une pièce. A savoir la qualité d'air, la temperature, l'humidité, et la pression.
52 partsGPL-3.0 - 4 layers54 × 25 mm
- 2 layers
- 4 layers56.3 × 45.9 mm
- 4 layers53.5 × 28.8 mm
STM32WB PCB2
NasserTaqi/STM32WB_Bluetooth_PCB
This project is a PCB built around an STM32WB for RF Bluetooth connection.
52 parts
Questions
How big is the Board ESP MikroBus V1 PCB?
It measures 103.6 × 61.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Board ESP MikroBus V1 use?
26 parts, built around the SMA-J-P-H-ST-EM1 and U.FL-R-SMT(01). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Board ESP MikroBus V1 KiCad files?
From the thingsat/tinygs_2g4station repository on GitHub, at the commit this page was made from: the board is Board_Tinysgs_2.4GHz_V1/Board_ESP_MikroBus_V1.kicad_pcb and its schematic Board_Mikrobus_NiceRF_1280_TCXO/Board_mikrobus_Nice1280_TCXO.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Board ESP MikroBus V1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask thingsat before reusing the design.