4 layers60 × 71 mm
LCD OLinuXino-15.6FHD Rev H
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
68 parts1.5k
4 layers180 × 97 mm
- Size
- 180 × 97 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 68
- Nets
- 80
- Pads
- 277
- Tracks, vias
- 721, 82
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 27 Apr 2025
- Updated
- 29 May 2025
Overview
LOF is an open-source printed circuit board by LauriAlanen, from the LauriAlanen/ModuMIDI repository on GitHub. It is a 4-layer board of 180 × 97 mm with 68 parts on 80 nets, routed with 721 tracks and 82 vias.
It is built around the PEL12D-4225S-S1024, 4816P-T01-103LF and M20-7822046, with the PTL60-15O1-104B2 among its other parts. Its parts include 27 connectors, 16 capacitors, 8 ICs, 4 switches and 2 resistors.
Main components
4PEL12D-4225S-S1024
PluginPlugin Rotary Encoders ROHSBournsRotary Encoders
4816P-T01-103LF
SOIC-16-5.6mm10kΩ 16 160mW 8 ±100ppm/℃ ±2% SOIC-16-5.6mm Resistor Networks, Arrays ROHSBournsResistor Networks & Arrays
M20-7822046
插件,P=2.54mm-40℃~+105℃ 1 1kV 2.54mm 20P 3A 8.51mm Through Hole Tin 插件,P=2.54mm Female Headers ROHSHarwinFemale HeadersPTL60-15O1-104B2
插件Potentiometers & Variable ResistorsBourns
Parts
68| Qty | Value | Footprint | References |
|---|---|---|---|
| 25 | Conn_01x01 | Connector_Wire:SolderWire-0.25sqmm_1x01_D0.65mm_OD1.7mm | J1, J2, J10, J11, J12, J13, J14, J15, J16, J17, J18, J19, J20, J21, J22, J23 +9 |
| 16 | 885012208009 | SamacSys_Parts:CAPC3216X90N | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16 |
| 8 | PEL12D-4225S-S1024 | SamacSys_Parts:PEL12D4225SS1024 | IC9, IC10, IC11, IC12, IC13, IC14, IC15, IC16 |
| 5 | 4816P-T01-103LF | SamacSys_Parts:SOIC127P762X215-16N | RN5, RN6, RN7, RN8, RN9 |
| 4 | 2MS6T1B3M2QES | SamacSys_Parts:2MS6T1B3M2QES | S1, S2, S3, S4 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4 |
| 2 | M20-7822046 | SamacSys_Parts:RHDR20W70P0X254_1X20_5120X250X865P | J26, J27 |
| 2 | PTL60-15O1-104B2 | SamacSys_Parts:PTL6015O1104B2 | VR1, VR2 |
| 2 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
Similar boards
- 4 layers45 × 32 mm
Templog mainboard
Michael-Manning/E-Paper-Climate-Logger
Firmware, PCB, and enclosure for the Weathergotchi E-Paper climate logger.
68 parts457MIT - 4 layers25 × 20 mm
RP2040-Decoder
gab-k/RP2040-Decoder
Cost effective DIY DCC Decoder for model railroad locomotives
68 parts131 - 4 layers37.7 × 37.7 mm
Dual radio pcb
AnyLeaf/elrs-hardware
This repo contains open source hardware information for AnyLeaf ELRS receivers
68 parts66MIT - 4 layers32.8 × 36.3 mm
Esp32
gdoor-org/gdoor
Wifi adapter and bus protocol documentation for the Gira TKS Door System
68 parts57GPL-3.0 - 4 layers55 × 50 mm
- 4 layers67.3 × 48.5 mm
- 4 layers135 × 118 mm
Questions
How big is the LOF PCB?
It measures 180 × 97 mm and has 4 copper layers, 1.6 mm thick.
What parts does the LOF use?
68 parts, built around the PEL12D-4225S-S1024, 4816P-T01-103LF, M20-7822046 and PTL60-15O1-104B2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LOF KiCad files?
From the LauriAlanen/ModuMIDI repository on GitHub, at the commit this page was made from: the board is hardware/pcb/Kicad/LOF.kicad_pcb and its schematic hardware/pcb/Kicad/LOF.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the LOF design in my own project?
Its repository states no licence, so its author keeps all rights: ask LauriAlanen before reusing the design.