4 layers100 × 50 mm
Superball powerboard pmos
kcaluwae/tensegrity-powerboard
pcb design for the SUPERball power board
176 parts1
2 layers110 × 55 mm
Hardware on back.
- Size
- 110 × 55 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 81
- Nets
- 49
- Pads
- 276
- Tracks, vias
- 497, 126
- Pours
- 12
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 13 Mar 2018
- Updated
- 8 May 2018
Overview
Back is an open-source printed circuit board by laser-game, from the laser-game/back-hw repository on GitHub. It is a 2-layer board of 110 × 55 mm with 81 parts on 49 nets, routed with 497 tracks and 126 vias.
It is built around the LTC1871EMS, LTC2941CMS8E#PBF and DST1045S-A, with the BSC080N03MS G among its other parts. Its parts include 27 resistors, 26 capacitors, 8 diodes, 6 ICs and 3 connectors. It belongs with the FPGA and CPLD boards of this library.
Main components
4
LTC1871EMS
MSOP-10-40℃~+85℃ 1 1MHz 2.5V~36V Boost、Buck-Boost Boost、SEPIC、Flyback External No MSOP-10 DC-DC ConvertersAnalog DevicesDC-DC Converters
LTC2941CMS8E#PBF
MSOP-8-EP0℃~+70℃ 1 100uA 2.7V~5.5V I2C、SMBus Lithium Battery Not supported Not supported MSOP-8-EP Battery Management ROHSAnalog DevicesBattery Management
DST1045S-A
TO-277B-55℃~+150℃ 1 Independent 10A 150A 45V 570mV@10A 800uA@45V TO-277B Schottky Diodes ROHSLittelfuseSchottky Diodes
BSC080N03MS G
TDSON-8-EP(5x6)-55℃~+150℃ 1 N-channel 10.2mΩ@4.5V 2.1nF 2V 30V 33pF 35W 510pF 53A 9.9nC N-Channel ±20V TDSON-8-EP(5x6) MOSFETs ROHSInfineon TechnologiesMOSFETs
README
README.md
Back
PCB includes battery monitoring, booster and indication.
Parts
81| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 10u/25V | Capacitor_SMD:C_1210_3225Metric | C10, C11, C16, C18, C20, C21, C22, C23, C24 |
| 8 | 100n | Capacitor_SMD:C_0805_2012Metric | C3, C4, C7, C8, C12, C15, C17, C26 |
| 8 | 120R | Resistor_SMD:R_0805_2012Metric | R1, R2, R4, R5, R8, R9, R11, R12 |
| 6 | 10k | Resistor_SMD:R_0805_2012Metric | R14, R15, R16, R22, R23, R27 |
| 5 | 180R | Resistor_SMD:R_0805_2012Metric | R3, R6, R10, R13, R21 |
| 5 | 1u/50V | Capacitor_SMD:C_0805_2012Metric | C1, C5, C6, C9, C14 |
| 4 | LTST-G563ZEGBW | KLIB_Opto:LED_RGB_5050-6 | D1, D2, D3, D4 |
| 4 | M3 | KLIB_Mechanical:Bolt_M3 | H1, H2, H3, H4 |
| 2 | 2k2 | Resistor_SMD:R_0805_2012Metric | R17, R18 |
| 2 | 4u7/25V | Capacitor_SMD:C_1206_3216Metric | C13, C19 |
| 2 | DST1045S | Package_TO_SOT_SMD:TO-277B | D5, D8 |
| 2 | HPI1260-2R2 | Inductor_SMD:L_12x12mm_H4.5mm | L1, L2 |
| 2 | MCP1826S | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2, U3 |
| 1 | 100R | Resistor_SMD:R_0805_2012Metric | R7 |
| 1 | 10m/1% | Resistor_SMD:R_1206_3216Metric | R26 |
| 1 | 150k/1% | Resistor_SMD:R_0805_2012Metric | R24 |
| 1 | 18k | Resistor_SMD:R_0805_2012Metric | R19 |
| 1 | 33k | Resistor_SMD:R_0805_2012Metric | R20 |
| 1 | 43k/1% | Resistor_SMD:R_0805_2012Metric | R25 |
| 1 | 47u/10V | Capacitor_Tantalum_SMD:CP_EIA-3528-21_Kemet-B | C2 |
| 1 | 47u/25V | Capacitor_Tantalum_SMD:CP_EIA-7343-31_Kemet-D | C25 |
| 1 | BQ24192 | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U4 |
| 1 | BSC080N03MS | Package_TO_SOT_SMD:TDSON-8-1 | Q1 |
| 1 | FC681495 | KLIB_Connector_Power:Cliff_FC681495 | J2 |
| 1 | GREEN | LED_SMD:LED_0805_2012Metric | D7 |
| 1 | IDC_02X13 | Connector_IDC:IDC-Header_2x13_P2.54mm_Vertical | J1 |
| 1 | LOGO | KLIB_Logo:wykys_skill | G*** |
| 1 | LTC1871 | Package_SO:MSOP-10_3x3mm_P0.5mm | U5 |
| 1 | LTC2941CMS8E | Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP1.68x1.88mm | U6 |
| 1 | N42GK-04 | KLIB_Connector_Power:N42GK-04 | J3 |
| 1 | OSRB38C9BA | KLIB_Opto:OSRB8C9BA_Horizontal | U1 |
| 1 | RED | LED_SMD:LED_0805_2012Metric | D6 |
The 78 most common of 81 parts.
Questions
How big is the Back PCB?
It measures 110 × 55 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Back use?
81 parts, built around the LTC1871EMS, LTC2941CMS8E#PBF, DST1045S-A and BSC080N03MS G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Back KiCad files?
From the laser-game/back-hw repository on GitHub, at the commit this page was made from: the board is hw/back.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Back design in my own project?
Its repository states no licence, so its author keeps all rights: ask laser-game before reusing the design.
Similar boards
- 2 layers195 × 95 mm
Device
jayis1/hacker-devices
Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack
11 parts2 - 2 layers38.6 × 39.8 mm
Ltc1871 dual sepic manual
freudenthal/skidl-eda
skidl-eda: AI circuit-design loop harness on the skidl stack
27 parts - 2 layers162.9 × 178.9 mm
- 2 layers177.2 × 114.3 mm
8-Bit CPU 32k
slu4coder/Minimal-UART-Computer-1-2
Legacy: Version 1 and 2 of my TTL-only CPU featuring UART I/O, an expansion port, 512KB SSD at up to 10MHz clock speed
81 parts184 - 2 layers
- 2 layers64 × 55 mm
Zynthiandac bk2
zynthian/zynthian-hw
Zynthian hardware stuff: PCBs, schemes, parts specifications, pin assignment, ...
81 parts156 - 2 layers
