2 layers80 × 23 mm
4 layers47.1 × 43.3 mm
HelixQueledPrint
LarsDwars/HelixQueledPrintAn break out board and LED driver for RGBW LED's from the showtec helix s5000 or any queled Q4xx light
- Size
- 47.1 × 43.3 mm
- Copper layers
- 4
- Thickness
- 1.61 mm
- Parts
- 133
- Nets
- 71
- Pads
- 399
- Tracks, vias
- 774, 422
- Pours
- 18
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 11 Aug 2025
- Updated
- 2 Jan 2026
Overview
HelixQueledPrint is an open-source printed circuit board by LarsDwars, from the LarsDwars/HelixQueledPrint repository on GitHub. It is a 4-layer board of 47.1 × 43.3 mm with 133 parts on 71 nets, routed with 774 tracks and 422 vias.
It is built around the TPS92201DRV, SY8366HQQC and CH224D, with the MB34F, XBL1117-3.3 and SMNR4020-2.2UH among its other parts. Its parts include 55 capacitors, 29 resistors, 9 ICs, 6 inductors and 3 connectors. It belongs with the ESP32 and RISC-V boards of this library.
Main components
12
TPS92201DRV
WSON-6-EP(2x2)-40℃~+85℃ 1 1.5A 1.5MHz 2.5V~5.5V 600mV~5.5V Analog、PWM Buck Built-in DC-DC Over Current Protection、Over-Temperature Protection (OTP) WSON-6-EP(2x2) LED Drivers ROHSTexas InstrumentsLED Drivers
SY8366HQQC
QFN-12-EP(3x3)-40℃~+150℃ 1 100uA 4V~28V 5V 6A 800kHz Buck Buck Built-in Fixed Yes QFN-12-EP(3x3) DC-DC Converters ROHSSilergy CorpDC-DC ConvertersCH224D
QFN-20-40℃~+100℃ 1 4V~30V USB 3.0 USB Charging IC QFN-20 USB PD ROHSWCH (Nanjing Qinheng Microelectronics)USB PD
MB34F
MBFBridge RectifiersGOODWORK
XBL1117-3.3
SOT-223-40℃~+125℃@(Ta) 1 1.3V@(1A) 15V 1A 3.3V 4mA Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSXBLWVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
SMNR4020-2.2UH
SMD,4x4mm2.2uH 3.4A 3.4A 46mΩ ±20% SMD,4x4mm Power Inductors ROHSSXNPower Inductors
CS1E680M-CRE54
SMD,D6.3xL5.4mm-40℃~+105℃ 1000hrs@105℃ 25V 5.4mm 6.3mm 68uF ±20% SMD,D6.3xL5.4mm Aluminum Electrolytic Capacitors - SMD ROHSSTMicroelectronicsAluminum Electrolytic Capacitors - SMD
GT-TC034A-H025-L1NB
SMD,3.5x3mmTactile SwitchesG-Switch
FTC404020S1R2MBCA
SMD,4.1x4.1mm1.2uH 10.5A 10A 10mΩ ±20% SMD,4.1x4.1mm Molding Power Inductors ROHScjiangPower Inductors
XTM32040000JT00351001
SMD3225-4PSMD3225-4P Crystals ROHSTOGNJINGCrystals
RF1-2626-125CE-CT
SMDCoaxial Connectors (RF)HYP
SS34
SMA(DO-214AC)-55℃~+125℃ 3A 40V 500uA@40V 550mV@3A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
README
README.mdHelixQueledPrint
An break out board and LED driver for RGBW LED's from the showtec helix s5000 or any queled Q4xx light
yay
Parts
133| Qty | Value | Footprint | References |
|---|---|---|---|
| 25 | 10uF 25V | Capacitor_SMD:C_0805_2012Metric | C10, C11, C15, C16, C18, C20, C201, C202, C203, C301, C302, C303, C401, C402, C403, C501 +9 |
| 21 | 100nF 25V | Capacitor_SMD:C_0402_1005Metric | C3, C4, C5, C6, C12, C17, C19, C204, C304, C404, C504, C604, C605, C606, C608, C609 +5 |
| 21 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3, TP4, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18, TP19, TP20, TP21 +5 |
| 16 | 10K | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R4, R6, R7, R8, R9, R10, R11, R14, R16, R202, R302, R402, R502 |
| 5 | C | Capacitor_SMD:C_0402_1005Metric | C13, C14, C101, C102, C103 |
| 4 | 100m | Resistor_SMD:R_0402_1005Metric | R201, R301, R401, R501 |
| 4 | 2.2u | Inductor_SMD:L_APV_ANR4020 | L201, L301, L401, L501 |
| 4 | 68K | Resistor_SMD:R_0402_1005Metric | R12, R13, R15, R601 |
| 4 | Fiducial | VE_misc:FIDUCIAL_Diameter_1mm | FID1, FID2, FID3, FID4 |
| 4 | TPS92201 | Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm_ThermalVias | U202, U302, U402, U502 |
| 2 | 0R | Resistor_SMD:R_0402_1005Metric | R18, R19 |
| 2 | 18pF 50V | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 2 | 68uF 25V | Capacitor_SMD:CP_Elec_6.3x5.4 | C601, C611 |
| 2 | SW_SPST | 1CustomFootprints:TS1101A26025 | SW1, SW2 |
| 1 | 1.2uH | Inductor_SMD:L_APV_ANR4012 | L601 |
| 1 | 1K2 | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 40MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | 8.2K | Resistor_SMD:R_0402_1005Metric | R602 |
| 1 | Antenna_Shield | RF_Antenna:Texas_SWRA117D_2.4GHz_Right | AE101 |
| 1 | CH224D | Package_DFN_QFN:QFN-20-1EP_3x3mm_P0.4mm_EP1.65x1.65mm_ThermalVias | U1 |
| 1 | Conn_Coaxial | Connector_Coaxial:U.FL_Hirose_U.FL-R-SMT-1_Vertical | J101 |
| 1 | ESP32-C6FHx | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.65x3.65mm_ThermalVias | U101 |
| 1 | L | Inductor_SMD:L_0402_1005Metric | L1 |
| 1 | LED_RGBW | 1CustomFootprints:QR4xLED | D2 |
| 1 | MB34F | 1CustomFootprints:MFB | U601 |
| 1 | N.C. | Resistor_SMD:R_0402_1005Metric | R20 |
| 1 | SS34 | VE_diodes:SMA | D1 |
| 1 | SY8366H | 1CustomFootprints:QFN3X3-12_SGY | U602 |
| 1 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_Xinya_XY308-2.54-2P_1x02_P2.54mm_Horizontal | J601 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | XBL1117 | Package_TO_SOT_SMD:SOT-223 | U603 |
Similar boards
- 2 layers90 × 60 mm
Solar charger 3
Vaaxs/solarCharger
A solar charge controller with MPPT and a 5V USB-C output. You wire a 6V solar panel into one terminal block and a 1S lithium pack into the other, and it charges the pack at up to 2.4A while holding the panel at the…
34 parts - 4 layers70 × 50 mm
- 2 layers42.4 × 29 mm
- 2 layers130 × 156 mm
- 4 layers160 × 80 mm
- 4 layers70 × 30 mm
Tdr dongle
MostlyWithinSpec/Network-Goblin-ND-2
A Linux-powered handheld network multitool with real cable diagnostics.
90 parts - 4 layers95 × 95 mm
Cube motherboard
willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels
52 parts1.1kGPL-3.0
Questions
How big is the HelixQueledPrint PCB?
It measures 47.1 × 43.3 mm and has 4 copper layers, 1.61 mm thick.
What parts does the HelixQueledPrint use?
133 parts, built around the TPS92201DRV, SY8366HQQC, CH224D and MB34F. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the HelixQueledPrint KiCad files?
From the LarsDwars/HelixQueledPrint repository on GitHub, at the commit this page was made from: the board is HelixQueledPrint/HelixQueledPrint.kicad_pcb and its schematic HelixQueledPrint/Driver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the HelixQueledPrint design in my own project?
Its repository states no licence, so its author keeps all rights: ask LarsDwars before reusing the design.