2 layers40 × 23 mm
T12 SolderingStationScreen
Cube-Line/T12_SolderingStation
T12_SolderingStation base on ATMEL328P
27 parts1
2 layers80 × 23 mm
T12 SolderingStation
Cube-Line/T12_SolderingStation1T12_SolderingStation base on ATMEL328P
- Size
- 80 × 23 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 60
- Nets
- 59
- Pads
- 232
- Tracks, vias
- 511, 282
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 11 Jul 2022
- Updated
- 5 Sep 2022
Overview
T12 SolderingStation is an open-source printed circuit board by Cube-Line, from the Cube-Line/T12_SolderingStation repository on GitHub. It is a 2-layer board of 80 × 23 mm with 60 parts on 59 nets, routed with 511 tracks and 282 vias.
It is built around the ATMEGA328P-AU, MP1584EN and CH224D, with the 1N4148W, BZV55B5V1 and SDT10A45P5-7 among its other parts. Its parts include 19 resistors, 14 capacitors, 5 diodes, 4 ICs and 4 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
7
ATMEGA328P-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)MP1584EN
SOIC-8-EP-20℃~+85℃ 1 100kHz~1.5MHz 4.5V~28V Adjustable Buck Buck Built-in SOIC-8-EP DC-DC Converters ROHSMonolithic Power SystemsDC-DC ConvertersCH224D
QFN-20-40℃~+100℃ 1 4V~30V USB 3.0 USB Charging IC QFN-20 USB PD ROHSWCH (Nanjing Qinheng Microelectronics)USB PD
1N4148W
SOD-123150mA 1A 1V@50mA 1uA@75V 400mW 4ns 75V Independent SOD-123 Switching Diodes ROHSSTMicroelectronicsSwitching Diodes
BZV55B5V1
LL-34-65℃~+200℃ 1 Independent 100nA@1V 35Ω 5.1V 500mW 550Ω 5V~5.2V LL-34 Zener Diodes ROHSLGEZener Diodes
SDT10A45P5-7
Power-DI-5-3-55℃~+150℃ 1 Independent 10A 180A 300uA@45V 45V 470mV@10A Power-DI-5-3 Schottky Diodes ROHSDiodes IncorporatedSchottky Diodes
SS54
SMA(DO-214AC)-55℃~+125℃ 1mA@40V 40V 550mV@5A 5A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
README
Readme.mdT12
Parts
60| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10K | Resistor_SMD:R_0402_1005Metric | R5, R11, R14, R15, R16, R17 |
| 3 | 100nF | Capacitor_SMD:C_0603_1608Metric | C10, C11, C13 |
| 3 | 20K | Resistor_SMD:R_0402_1005Metric | R4, R6, R13 |
| 2 | 100K | Resistor_SMD:R_0402_1005Metric | R3, R12 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C9, C14 |
| 2 | 200K | Resistor_SMD:R_0402_1005Metric | R7, R19 |
| 2 | 5.1K | Resistor_SMD:R_0402_1005Metric | R9, R10 |
| 2 | 50V/100nF | Capacitor_SMD:C_0603_1608Metric | C1, C3 |
| 2 | Conn_01x06_Female | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J5, J6 |
| 2 | JUMP | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2 |
| 1 | 10V/22uF | Capacitor_Tantalum_SMD:CP_EIA-3528-21_Kemet-B | C2 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C8 |
| 1 | 16mHz | Crystal:Resonator_SMD_Murata_CSTxExxV-3Pin_3.0x1.1mm | Y1 |
| 1 | 1N4148W | Diode_SMD:D_SOD-123 | D4 |
| 1 | 2.2nF | Capacitor_SMD:C_0603_1608Metric | C15 |
| 1 | 200k | Resistor_SMD:R_0402_1005Metric | R18 |
| 1 | 50V/100nF | Capacitor_SMD:C_0402_1005Metric | C5 |
| 1 | 50V/10uF | Capacitor_Tantalum_SMD:CP_EIA-6032-28_Kemet-C | C4 |
| 1 | 50V/220pF | Capacitor_SMD:C_0402_1005Metric | C6 |
| 1 | 6.8K | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 68.1K | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | ATmega328P-A | Package_QFP:TQFP-32_7x7mm_P0.8mm | U3 |
| 1 | BZV55B5V1 | Diode_SMD:D_MiniMELF | D3 |
| 1 | CH224D | Package_DFN_QFN:QFN-20-1EP_3x3mm_P0.4mm_EP1.65x1.65mm_ThermalVias | U2 |
| 1 | Conn_01x05_Female | Connector_Phoenix_MC:PhoenixContact_MC_1,5_5-G-3.5_1x05_P3.50mm_Horizontal | J4 |
| 1 | GND | TestPoint:TestPoint_Pad_1.0x1.0mm | TP6 |
| 1 | GREEN | LED_SMD:LED_0402_1005Metric | D2 |
| 1 | L | Inductor_SMD:L_7.3x7.3_H4.5 | L1 |
| 1 | MISO | TestPoint:TestPoint_Pad_1.0x1.0mm | TP2 |
| 1 | MOSI | TestPoint:TestPoint_Pad_1.0x1.0mm | TP3 |
| 1 | MP1584EN | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm_ThermalVias | U1 |
| 1 | NC | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | NC | Capacitor_SMD:C_0402_1005Metric | C7 |
| 1 | OPA2333xxD | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | RST | TestPoint:TestPoint_Pad_1.0x1.0mm | TP5 |
| 1 | RXD | TestPoint:TestPoint_Pad_1.0x1.0mm | TP8 |
| 1 | RotaryEncoder_2 | My_Library:EC10E | SW2 |
| 1 | SCK | TestPoint:TestPoint_Pad_1.0x1.0mm | TP4 |
| 1 | SDT10A45P5 | My_Library:PowerDI5 | D5 |
| 1 | SS54 | Diode_SMD:D_SMA | D1 |
| 1 | SW_DPST_Temperature | Button_Switch_SMD:SW_SPST_Omron_B3FS-100xP | SW1 |
| 1 | TXD | TestPoint:TestPoint_Pad_1.0x1.0mm | TP7 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_Palconn_UTC16-G | J1 |
| 1 | VCC | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1 |
More from Cube-Line/T12_SolderingStation
1Similar boards
- 4 layers47.1 × 43.3 mm
HelixQueledPrint
LarsDwars/HelixQueledPrint
An break out board and LED driver for RGBW LED's from the showtec helix s5000 or any queled Q4xx light
133 parts - 2 layers61 × 96.4 mm
- 4 layers250 × 145 mm
KARCA v2
rice-eclipse/kARCA_v2
Schematics and Board files for the Titan II/Proxima Hybrid Engine Control System
323 parts - 4 layers48.1 × 0.4 mm
- 2 layers90 × 60 mm
PCB MAQUEEN V1
vmfachini/Lumibot
Desenvolvimento de um Hardware Livre, com uso de energia limpa, baseado no micro:bit para criar robôs móveis acessíveis, promovendo ensino de robótica, pensamento computacional e sustentabilidade no Brasil.
44 partsMIT - 4 layers29 × 69.8 mm
- 2 layers54.5 × 29.5 mm
- 2 layers194 × 129.5 mm
Questions
How big is the T12 SolderingStation PCB?
It measures 80 × 23 mm and has 2 copper layers, 1.6 mm thick.
What parts does the T12 SolderingStation use?
60 parts, built around the ATMEGA328P-AU, MP1584EN, CH224D and 1N4148W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the T12 SolderingStation KiCad files?
From the Cube-Line/T12_SolderingStation repository on GitHub, at the commit this page was made from: the board is 010.Hardware/Ver0.1.1/T12_SolderingStationMain/T12_SolderingStation.kicad_pcb and its schematic 010.Hardware/Ver0.1.0/Covers/Covers/Covers.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the T12 SolderingStation design in my own project?
Its repository states no licence, so its author keeps all rights: ask Cube-Line before reusing the design.