

DS to SNES Controller
PCB for converting a DS shell into a SNES controller.
- Size
- 141.1 × 77.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 50
- Nets
- 30
- Pads
- 162
- Tracks, vias
- 423, 88
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 15 Aug 2024
- Updated
- 7 Dec 2024
Overview
DS to SNES Controller is an open-source printed circuit board by laplacier, from the laplacier/DS-to-SNES-Controller repository on GitHub, published under the MIT licence. It is a 2-layer board of 141.1 × 77.5 mm with 50 parts on 30 nets, routed with 423 tracks and 88 vias.
Its parts include 6 capacitors, 3 resistors and 3 ICs. It belongs with the retro computing and games boards of this library.
README
README.mdDS-to-SNES-Controller
PCB for converting a DS shell into a SNES controller.
Parts
50| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | Conn_01x01_Pin | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | A, B, DOWN, J1, J2, J3, J4, J5, LEFT, RIGHT, SELECT, START, UP, X, Y |
| 9 | @HOLE0, @HOLE1, @HOLE2, @HOLE3, @HOLE4, @HOLE5, @HOLE6, @HOLE7, @HOLE8 | ||
| 8 | C-NTR-CPU-10:BUTTON | BUT_A0, BUT_B0, BUT_DN0, BUT_LF0, BUT_RG0, BUT_UP0, BUT_X0, BUT_Y0 | |
| 3 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C3, C5 |
| 3 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C4, C6 |
| 3 | 270Ω | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3 |
| 2 | 4021 | Package_DIP:DIP-16_W7.62mm | U2, U3 |
| 2 | 47kΩ | Resistor_SMD:R_Array_Convex_5x1206 | RN1, RN2 |
| 2 | BUTTON_LR | C-NTR-CPU-10:BUTTON_LR | BUT_L0, BUT_R0 |
| 2 | BUTTON_SMALL | C-NTR-CPU-10:BUTTON_SMALL | BUT_SEL0, BUT_ST0 |
| 1 | ~ | footprints:V520B-SNES | U1 |
Similar boards
- 2 layers187.2 × 26.6 mm

- 2 layers45.7 × 25.9 mm

- 2 layers21 × 31.5 mm

- 2 layers42 × 32.5 mm

Lipoboard
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
50 parts915 - 2 layers80 × 109.5 mm

NucDeck Right Controller PCB - Rev 1.2
dmcke5/NucDeck
The Open Source DIY Handheld Gaming PC!
50 parts561CERN-OHL-S-2.0 - 2 layers101 × 31.5 mm

- 2 layers123.9 × 94.4 mm

- 2 layers50 × 25 mm

Mbus master
roarfred/AmsToMqttBridge
Minimalistic system to read AMS/HAN data from electrical meter
50 parts223
Questions
How big is the DS to SNES Controller PCB?
It measures 141.1 × 77.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DS to SNES Controller use?
50 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DS to SNES Controller KiCad files?
From the laplacier/DS-to-SNES-Controller repository on GitHub, at the commit this page was made from: the board is KiCAD Files/DS_to_SNES_Controller.kicad_pcb and its schematic KiCAD Files/DS_to_SNES_Controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DS to SNES Controller design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).