4 layers65 × 23 mm
SDTV2CSI
eligold/SDTV2CSI
Digitize analog standard definition video for the pi CSI-2 input
44 parts1CERN-OHL-S-2.0
4 layers40 × 80 mm
SIM7600-breakout
lamemakes/SIM7600-breakout6A breakout board for the SIM7600 LTE module
- Size
- 40 × 80 mm
- Copper layers
- 4
- Thickness
- 1.54 mm
- Parts
- 69
- Nets
- 117
- Pads
- 379
- Tracks, vias
- 1,024, 204
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 7 Dec 2022
- Updated
- 14 Apr 2026
Overview
SIM7600-breakout is an open-source printed circuit board by lamemakes, from the lamemakes/SIM7600-breakout repository on GitHub. It is a 4-layer board of 40 × 80 mm with 69 parts on 117 nets, routed with 1,024 tracks and 204 vias.
It is built around the SIM7600G-H, NAU8810YG and U.FL-R-SMT-1(01), with the ESD9L5.0ST5G, AOM-4544P-R and MJ-3502N among its other parts. Its parts include 24 resistors, 18 capacitors, 8 connectors, 5 diodes and 4 ICs. It belongs with the interfaces and adapters boards of this library.
Main components
9
SIM7600G-H
SMD,30x30mm2.3mA 3.4V~4.2V GPRS、GSM、FDD-LTE、TDD-LTE、EDGE、HSPA+ I2C、USB、UART、SDMMC、ADC PCM语音功能、UMTS功能、HSPA功能、DTMF功能、音频回放和录制功能 SMD,30x30mm 2G/3G/4G/5G Modules ROHSSIMCom Wireless Solutions2G/3G/4G/5G Modules
NAU8810YG
QFN-20(4x4)-40℃~+85℃ 1.71V~3.6V、2.5V~3.6V 8kHz~48kHz Built-in phase-locked loop、On-chip digital gain、Mute control Encoder/decoder I2S QFN-20(4x4) Audio Interface ICs ROHSNuvoton TechAudio Interface ICs
U.FL-R-SMT-1(01)
SMD-40℃~+90℃ 1 1.25mm 2mm 50Ω 6GHz Board Side IPEX Male Pin SMD Coaxial Connectors (RF) ROHSHirose ElectricCoaxial Connectors (RF)
ESD9L5.0ST5G
SOD-9230.5pF 100nA 40W@8/20us 4A 5V 7.8V 9V ESD Unidirectional SOD-923 ESD and Surge Protection (TVS/ESD) ROHSMSKSEMIESD And Surge Protection (TVS/ESD)
AOM-4544P-R
--44dB@±2dB 2.2kΩ 3V~10V 4.7mm 500uA 60dB 9.7mm Omnidirectional - Microphones ROHSPUI Audio, Inc.Microphones
MJ-3502N
插件,13.5x7.6mm-20℃~+85℃ 12V 1A Brass、Phosphor bronze Silver 插件,13.5x7.6mm Audio Connectors ROHSCUIAudio Connectors (Headphones)
MMBT3904L RFG
SOT-23-55℃~+150℃ 100 200mA 250MHz 300mV 300mW 40V 50nA 6V NPN SOT-23 Bipolar (BJT) ROHSTaiwan SemiconductorBipolar (BJT)
PESD2V0Y1BSFYL
DSN0603-2-40℃~+125℃ 0.69pF 1 1nA 2V 3.3V 3V 6A@8/20us Bidirectional ESD IEC 61000-4-2 DSN0603-2 ESD and Surge Protection (TVS/ESD) ROHSNexperiaESD And Surge Protection (TVS/ESD)SIM8060-6-0-14-00-A
SMD-20℃~+85℃ 1.42mm 125V Connector and Ejector Hinged Lid Nano-SIM Card SMD SIM Card Connectors ROHSGlobal Connector Technology (GCT)SIM Card Connectors
README
hardware/v0.1/README.mdSIM7600 Breakout Board Hardware
BOM
A list of the parts used & where they can be found
| Part No. | Ref Des | Link | Quantity | Notes |
|---|---|---|---|---|
| 2137160001 | J5 | Digikey | 1 | USB C 2.0 Receptacle |
| SIM7600G R2 | U3 | Digikey | 1 | SIMCom Wireless LTE Module |
| NAU8810YG | U4 | Digikey | 1 | Audio Codec |
| NVT2008PW,118 | U1, U2 | Digikey | 2 | Serial Logic Shifter |
| SIM8060-6-0-14-00-A | J1 | Digikey | 1 | Nano SIM Card Holder |
| MMBT3904L RFG | Q1 | Digikey | 1 | NPN BJT for SIM7600 Power Key |
| PESD2V0Y1BSFYL | D5 | Digikey | 1 | TVS Diode |
| ESD9L5.0ST5G | D3, D4 | Digikey | 2 | TVS Diode (USB Data) |
| U.FL-R-SMT-1(01) | J6, J7, J8 | Digikey | 3 | Male U.FL 50Ω Receptacle |
| MJ-3502N | J3 | Digikey | 1 | 3.5mm Headphone Phone Jack |
| AOM-4542P-R | MK1 | Digikey | 1 | Analog Condenser Microphone |
| C0603C220J5GACTU | C1, C2, C3 | Digikey | 3 | 22pF caps |
| CL10B104KO8NNNC | C4, C9, C10, C12 | Digikey | 4 | 0.1uF cap |
| CL10A106MQ8NNNC | C5 | Digikey | 1 | 10uF cap |
| CL10A475KP8NNNC | C6, C23, C24, C25, C26 | Digikey | 5 | 4.7uF cap |
| CL10B105KP8NNNC | C7, C8 | Digikey | 2 | 1uF cap |
| CL10C330JB8NNNC | C27 | Digikey | 1 | 33pF cap |
| 865080543009 | C19, C22 | Digikey | 2 | 47uF cap |
| 150120RS75000 | D1, D2 | Digikey | 2 | Red LED |
| M20-9990245 | J2 | Digikey | 1 | 1x2 2.54mm male header pins |
L1 | 1 | 47nH inductor wrong footprint | ||
| RC0201JR-0747KL | R1, R2, R3, R9, R10, R11, R12, R13 | Digikey | 8 | 47kΩ resistor |
| RC0201FR-074K7L | R4, R8, R19, R20, R21 | Digikey | 5 | 4k7Ω resistor |
| RC0201JR-075K1L | R5, R24 | Digikey | 2 | 5k1Ω resistor |
| RC0201FR-0722RL | R6, R7 | Digikey | 2 | 22Ω resistor |
| RC0201FR-071K3L | R14, R15 | Digikey | 2 | 1k3Ω resistor |
| RC0201FR-07390RL | R16, R17 | Digikey | 2 | 390Ω resistor |
| RC0201FR-0710RL | R18 | Digikey | 1 | 10Ω resistor |
| RC0201FR-072K2L | R22, R23 | Digikey | 2 | 2k2Ω resistor |
Parts
69| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 47k | Resistor_SMD:R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R1, R2, R3, R9, R10, R11, R12, R13 |
| 5 | 4.7uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6, C23, C24, C25, C26 |
| 5 | 4k7 | Resistor_SMD:R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R4, R8, R19, R20, R21 |
| 5 | LOGO | sim7600_breakout:arrow | G***, G***, G***, G***, G*** |
| 4 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C9, C10, C12 |
| 3 | 22pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3 |
| 3 | U.FL-R-SMT-1(01) | sim7600_breakout:HIROSE_U.FL-R-SMT-1(01) | J6, J7, J8 |
| 2 | 1.3k | Resistor_SMD:R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R14, R15 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7, C8 |
| 2 | 22 | Resistor_SMD:R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R6, R7 |
| 2 | 2k2 | Resistor_SMD:R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R22, R23 |
| 2 | 390 | Resistor_SMD:R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R16, R17 |
| 2 | 47uF | sim7600_breakout:865080543009 | C19, C22 |
| 2 | 5K1 | Resistor_SMD:R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R5, R24 |
| 2 | ESD9L5.0ST5G | sim7600_breakout:DIOM1006X40N | D3, D4 |
| 2 | NVT2008PW_118 | sim7600_breakout:NVT2008PW_118 | U1, U2 |
| 2 | R_LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1, D2 |
| 1 | 10 | Resistor_SMD:R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R18 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5 |
| 1 | 2137160001 | sim7600_breakout:2137160001-USB-C | J5 |
| 1 | 2W Header | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | 30W Header | Connector_PinHeader_2.54mm:PinHeader_1x30_P2.54mm_Vertical | J4 |
| 1 | 33pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C27 |
| 1 | 47nH | sim7600_breakout:IND_LQP02HQ47NH02E | L1 |
| 1 | AOM-4544P | sim7600_breakout:MIC_AOM-4544P-NF-R | MK1 |
| 1 | LOGO | sim7600_breakout:oshw_logo | G*** |
| 1 | LOGO | sim7600_breakout:lamemakes_logo | G*** |
| 1 | MJ-3502N | sim7600_breakout:CUI_MJ-3502N | J3 |
| 1 | MMBT3904L_RFG | sim7600_breakout:SOT95P237X112-3N | Q1 |
| 1 | NAU8810YG | sim7600_breakout:QFN50P400X400X80-21N | U4 |
| 1 | PESD2V0Y1BSFYL | sim7600_breakout:PESD2V0Y1BSFYL | D5 |
| 1 | SIM7600G-H | sim7600_breakout:IC_SIM7600E-H | U3 |
| 1 | SIM8060-6-0-14-00-A | sim7600_breakout:GCT_SIM8060-6-0-14-00-A | J1 |
Questions
How big is the SIM7600-breakout PCB?
It measures 40 × 80 mm and has 4 copper layers, 1.54 mm thick.
What parts does the SIM7600-breakout use?
69 parts, built around the SIM7600G-H, NAU8810YG, U.FL-R-SMT-1(01) and ESD9L5.0ST5G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SIM7600-breakout KiCad files?
From the lamemakes/SIM7600-breakout repository on GitHub, at the commit this page was made from: the board is hardware/v0.1/SIM7600_Breakout.kicad_pcb and its schematic hardware/v0.1/SIM7600_Breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SIM7600-breakout design in my own project?
Its repository states no licence, so its author keeps all rights: ask lamemakes before reusing the design.
Similar boards
- 4 layers250 × 90 mm
- 2 layers
Panic button
HenraL/panic_button
This is an attempt at creating a box that aims to allow you to broacast your location to someone close like the other deivces (air tag, tile, etc) but as it is not a brand and uses the internet instead of ble and an…
43 partsMIT - 4 layers100 × 80 mm
Low Power Cellular ePaper Device ESP32-S3 SIM7600
xmyoot/cellular-epaper-esp32s3-sim7600
Low-Power Cellular ePaper Device with ESP32-S3 and SIM7600 LTE Cat-1
108 parts - 2 layers92.5 × 150.6 mm
- 2 layers92.5 × 175 mm
- 2 layers29.4 × 110 mm
- 4 layers223 × 226 mm
Apple PCB 820-0086-C
RichCini/MacRedux
Redraws/reimplementations of various legacy Macintosh boards.
186 parts4