
Ya4b alu
lafehubert/electronics
A place for info and code relating to my electronics projects

A place for info and code relating to my electronics projects
Ya4b alu is an open-source printed circuit board by lafehubert, from the lafehubert/electronics repository on GitHub. It is a 4-layer board of 100.2 × 81.9 mm with 82 parts on 140 nets, routed with 1,390 tracks and 104 vias.
It is built around the 74LS173SC, 74LS32SC and 74LS00SC, with the 74LS04PC, 74LS157PC and 74LS379PC among its other parts. Its parts include 38 diodes, 16 capacitors, 16 ICs, 2 resistors and 1 connector. It belongs with the FPGA and CPLD boards of this library.
This slow clock was initially inspired by Ben Eater's design (https://eater.net/8bit/clock) but I found the 555 to be too fiddly for the monostable stage, and overkill for the bistable stage, so I used a 74LS123 for the former and an R-S latch made from a couple of NANDs on a 74LS00 for the latter. I also replaced the 74LS04 with a 74LS14 which seemed to clean up the waveform a good bit.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 38 | LED | LED_THT:LED_Rectangular_W5.0mm_H2.0mm | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +22 |
| 16 | 0.1µF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16 |
| 7 | 470Ω | Resistor_THT:R_Array_SIP5 | RN1, RN3, RN4, RN5, RN6, RN7, RN9 |
| 3 | 74LS173 | Package_DIP:DIP-16_W7.62mm_Socket | U3, U4, U5 |
| 3 | 74LS243 | Package_DIP:DIP-14_W7.62mm_Socket | U6, U15, U16 |
| 2 | 470Ω | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
| 2 | 74LS08 | Package_DIP:DIP-14_W7.62mm_Socket | U8, U12 |
| 2 | 74LS32 | Package_DIP:DIP-14_W7.62mm_Socket | U9, U11 |
| 1 | 10kΩ | Resistor_THT:R_Array_SIP5 | RN8 |
| 1 | 470Ω | Resistor_THT:R_Array_SIP9 | RN2 |
| 1 | 74LS00 | Package_DIP:DIP-14_W7.62mm_Socket | U10 |
| 1 | 74LS04 | Package_DIP:DIP-14_W7.62mm_Socket | U7 |
| 1 | 74LS157 | Package_DIP:DIP-16_W7.62mm_Socket | U14 |
| 1 | 74LS379 | Package_DIP:DIP-16_W7.62mm_Socket | U2 |
| 1 | 74LS382 | Package_DIP:DIP-20_W7.62mm_Socket | U13 |
| 1 | Conn_01x38 | Connector_PinHeader_2.54mm:PinHeader_1x38_P2.54mm_Vertical | J1 |
| 1 | GAL22V10 | Package_DIP:DIP-24_W7.62mm_Socket | U1 |

lafehubert/electronics
A place for info and code relating to my electronics projects

lafehubert/electronics
A place for info and code relating to my electronics projects

lafehubert/electronics
A place for info and code relating to my electronics projects

lafehubert/electronics
A place for info and code relating to my electronics projects

lafehubert/electronics
A place for info and code relating to my electronics projects

lafehubert/electronics
A place for info and code relating to my electronics projects



The-Invent0r/8-bit-Computer-PCB
These are the KiCAD files for my 8-Bit Computer.

Trilobyte-CPU/8-bit-computer
A DIY 8-bit computer built mostly with discrete logic chips



frubem/NE_Delta_Schematics
Forked from https://codeberg.org/hkzlab/NE_Delta_Schematics

It measures 100.2 × 81.9 mm and has 4 copper layers, 1.6 mm thick.
82 parts, built around the 74LS173SC, 74LS32SC, 74LS00SC and 74LS04PC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the lafehubert/electronics repository on GitHub, at the commit this page was made from: the board is ya4b/alu/designs/74LS382/ya4b-alu/ya4b-alu.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask lafehubert before reusing the design.