Skip to the content
2 layers55 × 45 mmMBFrontEnd, the printed circuit board in 3D

Data Supporting development of Si473x series radios

Size
55 × 45 mm
Copper layers
2
Thickness
1.6 mm
Parts
59
Nets
51
Pads
235
Tracks, vias
427, 65
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
9 Nov 2020
Updated
14 Sep 2023

Overview

MBFrontEnd is an open-source printed circuit board by LadyRoninEngineer, from the LadyRoninEngineer/Si473x repository on GitHub, published under the Unlicense licence. It is a 2-layer board of 55 × 45 mm with 59 parts on 51 nets, routed with 427 tracks and 65 vias.

It is built around the AD831APZ, PE4312C-Z and PGA-103, with the SI5351A-B-GT, CM1213A-01SO and TCCH-80 among its other parts. Its parts include 21 capacitors, 14 resistors, 6 ICs, 3 connectors and 3 inductors.

Main components

6

README

README.md

Si473x

Data Supporting development of Si473x series radios

Parts

59
QtyValueFootprintReferences
710kΩResistor_SMD:R_0402_1005MetricR6, R9, R10, R11, R12, R13, R14
60.1µFCapacitor_SMD:C_0603_1608MetricC6, C7, C11, C12, C13, C21
382pFCapacitor_SMD:C_0402_1005MetricC8, C9, C18
3SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmA0, A1, A2
210nFCapacitor_SMD:C_0805_2012MetricC1, C3
24.7kΩResistor_SMD:R_0402_1005MetricR4, R5
2470nFCapacitor_SMD:C_0402_1005MetricC14, C15
251.1ΩResistor_SMD:R_0603_1608MetricR2, R3
2Conn_CoaxialConnector_Coaxial:SMA_Molex_73251-1153_EdgeMount_HorizontalJ1, J2
1100nFCapacitor_SMD:C_0603_1608MetricC10
1100nFCapacitor_SMD:C_0402_1005MetricC16
1100µFCapacitor_Tantalum_SMD:CP_EIA-7343-30_AVX-NC20
110µFCapacitor_SMD:C_1206_3216MetricC4
110µFCapacitor_Tantalum_SMD:CP_EIA-3528-21_Kemet-BC17
110µHCD54NP220MC:CD54NP-220MCL3
1130kΩResistor_SMD:R_0402_1005MetricR7
1150ΩResistor_SMD:R_0603_1608MetricR1
11N5817Diode_SMD:D_SOD-323D2
1300kΩResistor_SMD:R_0402_1005MetricR8
1330nFCapacitor_SMD:C_0402_1005MetricC5
1330pFCapacitor_SMD:C_0603_1608MetricC2
147µFCapacitor_Tantalum_SMD:CP_EIA-7343-30_AVX-NC19
1620nHInductor_SMD:L_1008_2520MetricL1
1ABM8G-25.MHZCrystal:Crystal_SMD_Abracon_ABM8G-4Pin_3.2x2.5mmY1
1AD831APZPackage_LCC:PLCC-20U3
1ASTX-H11-25.0MHzOscillator:Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mmX1
1CM1213A-01SOPackage_TO_SOT_SMD:SOT-23D1
1Conn_01x06_MaleConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_HorizontalJ3
1MCP23008-xSSPackage_SO:SSOP-20_5.3x7.2mm_P0.65mmU5
1PE4312C-ZPackage_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.6x2.6mmU2
1PGA-103Package_TO_SOT_SMD:SOT-89-3U1
1Si5351A-BPackage_SO:MSOP-10_3x3mm_P0.5mmU4
1TCCH-80GU1604L2
1TPS6735IDRPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU6

The 54 most common of 59 parts.

More from LadyRoninEngineer/Si473x

6
  • 2 layers97 × 79.5 mmMBRadioDual2, the printed circuit board in 3D

    MBRadioDual2

    LadyRoninEngineer/Si473x

    Data Supporting development of Si473x series radios

    104 parts35Unlicense
  • 2 layers65 × 40 mmMBRadio 4732 BO3, the printed circuit board in 3D

    MBRadio 4732 BO3

    LadyRoninEngineer/Si473x

    Data Supporting development of Si473x series radios

    53 parts35Unlicense
  • 2 layers50 × 55 mm4732 THT V2, the printed circuit board in 3D

    4732 THT V2

    LadyRoninEngineer/Si473x

    Data Supporting development of Si473x series radios

    33 parts35Unlicense
  • 2 layers44 × 50 mmRadioSupport, the printed circuit board in 3D

    RadioSupport

    LadyRoninEngineer/Si473x

    Data Supporting development of Si473x series radios

    25 parts35Unlicense
  • 2 layers100 × 55 mm4732THT CONTROLLER2, the printed circuit board in 3D

    4732THT CONTROLLER2

    LadyRoninEngineer/Si473x

    Data Supporting development of Si473x series radios

    23 parts35Unlicense
  • 2 layers90 × 21 mmMBRadioPanel, the printed circuit board in 3D

    MBRadioPanel

    LadyRoninEngineer/Si473x

    Data Supporting development of Si473x series radios

    16 parts35Unlicense

Similar boards

  • 2 layers42.7 × 17.5 mmKicad 1090MHz LNA, the printed circuit board in 3D

    Kicad 1090MHz LNA

    alekseymikhno/adsb-ground-station

    RF receive-chain design for a 1090 MHz ADS-B ground station, VNA-characterized antenna, custom PGA-103+ LNA, and a full capture-to-replay data pipeline.

    17 partsMIT
  • 2 layers40 × 35 mmAD831 Mixer, the printed circuit board in 3D

    AD831 Mixer

    k1zmt/SSB85MultiPCB

    WIP! Don't try repeating!

    38 parts1
  • 4 layers100 × 100 mmT41, the printed circuit board in 3D

    T41

    ai6ym/t41

    T41-EP SDT Files

    234 parts10
  • 4 layers100 × 100 mmT41-RF board V012, the printed circuit board in 3D

    T41-RF board V012

    K0RGI/T41-K9HZ

    This is the repository for the officially released V10, V11, and V12 versions of the T41 Software Defined Transceiver hardware and kits.

    232 parts1GPL-3.0
  • 4 layers125.6 × 75 mmMIMO SAR RADAR, the printed circuit board in 3D

    MIMO SAR RADAR

    siru409/Dilf-seeker

    A near field multi beam ultra wideband fmcw radar detector using a novel near field focussed rotman lens

    277 parts
  • 2 layers65 × 90 mmDual BPF, the printed circuit board in 3D

    Dual BPF

    F6ITU/Dual_BPF

    New generation dual band pass filter for OpenHPSDR receive path

    137 parts2
  • 2 layers33.2 × 15 mmDF782-breakout, the printed circuit board in 3D

    DF782-breakout

    MTalon63/PCBs

    Misc. PCB designs

    16 parts2
  • 6 layers45.5 × 96 mmLinht hw, the printed circuit board in 3D

    Linht hw

    M17-Project/LinHT-hw

    LinHT - Linux-based, SDR handheld transceiver.

    258 parts221

Questions

How big is the MBFrontEnd PCB?

It measures 55 × 45 mm and has 2 copper layers, 1.6 mm thick.

What parts does the MBFrontEnd use?

59 parts, built around the AD831APZ, PE4312C-Z, PGA-103 and SI5351A-B-GT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the MBFrontEnd KiCad files?

From the LadyRoninEngineer/Si473x repository on GitHub, at the commit this page was made from: the board is FrontEnd/MBFrontEnd.kicad_pcb and its schematic MBRF_DUAL/MBRadioDual2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the MBFrontEnd design in my own project?

Its repository publishes it under the Unlicense licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).