
MBRadioDual2
LadyRoninEngineer/Si473x
Data Supporting development of Si473x series radios

Data Supporting development of Si473x series radios
4732THT CONTROLLER2 is an open-source printed circuit board by LadyRoninEngineer, from the LadyRoninEngineer/Si473x repository on GitHub, published under the Unlicense licence. It is a 2-layer board of 100 × 55 mm with 23 parts on 34 nets, routed with 128 tracks and 2 vias.
It is built around the D6R90F1LFS. Its parts include 4 resistors, 4 connectors, 3 switches and 2 capacitors.
Data Supporting development of Si473x series radios
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10kΩ | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R3, R4, R5 |
| 2 | 10nF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C2 |
| 2 | D6R90F1LFS | D6R00F1LFS:D6R_CNK | SW2, SW3 |
| 1 | Adafruit_Feather_Generic | Module:Adafruit_Feather_WithMountingHoles | A2 |
| 1 | Conn_01x02_Pin | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J2 |
| 1 | Conn_01x05_Socket | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J3 |
| 1 | Conn_01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | Conn_01x11_Male | 5394_1.9in_TFT:Display | J4 |
| 1 | RotaryEncoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW1 |
| 1 | SolderJumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
The 15 most common of 23 parts.

LadyRoninEngineer/Si473x
Data Supporting development of Si473x series radios

LadyRoninEngineer/Si473x
Data Supporting development of Si473x series radios

LadyRoninEngineer/Si473x
Data Supporting development of Si473x series radios

LadyRoninEngineer/Si473x
Data Supporting development of Si473x series radios

LadyRoninEngineer/Si473x
Data Supporting development of Si473x series radios

LadyRoninEngineer/Si473x
Data Supporting development of Si473x series radios

TheSlowGrowth/TapeLooper
A digital tape looper module for Eurorack or standalone use, built on the Daisy Seed.

RICCIARDI-Adrien/Chip8_Console
A Chip-8 / Super Chip-8 console powered by a 8-bit PIC18 microcontroller.

robotique-udes/Exo_Electric
This repo contains all the information about the PCB and electrical schematics of Biogenius.


google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards



It measures 100 × 55 mm and has 2 copper layers, 1.6 mm thick.
23 parts, built around the D6R90F1LFS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the LadyRoninEngineer/Si473x repository on GitHub, at the commit this page was made from: the board is Si4732THT/KiCAD_Controller/4732THT_CONTROLLER2.kicad_pcb and its schematic MBRF_DUAL/MBRadioDual2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Unlicense licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).