

Integ Temp Current Pressure
Embedded Design for DALI Lighting Controller
- Size
- 57.5 × 38.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 47
- Nets
- 42
- Pads
- 170
- Tracks, vias
- 328, 22
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 15 Jul 2021
- Updated
- 19 Jul 2021
Overview
Integ Temp Current Pressure is an open-source printed circuit board by lactobacil, from the lactobacil/DALI_STM32 repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 57.5 × 38.4 mm with 47 parts on 42 nets, routed with 328 tracks and 22 vias.
It is built around the AMS1117. Its parts include 11 capacitors, 9 resistors, 9 diodes, 4 connectors and 3 ICs. It belongs with the STM32 boards of this library.
Main components
1README
README.mdDALI_STM32
Embedded Design for DALI Lighting Controller

Description
Final Year Project completion, adding DALI Interfaces to create a bare minimum lighting control method, operable with GUI in Python and serial connection. First PCB iteration is to create a minimum STM-32 Board before proceeding to implement DALI controller.
#Schematic Adding DALI Interface from DRM0004 design base

PCB
Made in KiCAD with downloadable files.
Bare-Minimum STM32 Breakout Board

Added with Split Power supply of 5v to 3.3v for logic chips and comparator of DALI interface. 3.3v for microcontroller purposes.

Parts
47| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8, R9 |
| 9 | 1N4148 | Diode_SMD:D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8, D9 |
| 6 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C6, C7, C9, C10 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C8, C11 |
| 3 | 430 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | RRef_1, RRef_2, RRef_3 |
| 3 | Ferrite_Bead_Small | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | FB1, FB2, FB3 |
| 3 | MAX31865xTP | Package_DFN_QFN:TQFN-20-1EP_5x5mm_P0.65mm_EP3.25x3.25mm | U1, U2, U3 |
| 3 | Screw_Terminal_01x03 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-3-3.5-H_1x03_P3.50mm_Horizontal | J1, J2, J3 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C5 |
| 1 | AMS1117 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | Vreg1 |
| 1 | Conn_01x08_Female | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J4 |
More from lactobacil/DALI_STM32
2- 2 layers47 × 62.4 mm

- 2 layers36.8 × 36.8 mm

Similar boards
- 2 layers74.4 × 51.2 mm

Esp32-wroom timer
AlessandroAU/Chorus32-ESP32LapTimer
This is an ESP32 port of the popular Chorus RF Laptimer
66 parts102GPL-3.0 - 2 layers44 × 20.5 mm

- 4 layers125 × 90 mm

- 2 layers100 × 45 mm

- 2 layers85 × 56 mm

Basicengine
uli/basicengine-pcb
Schematics and PCB layout for the BASIC Engine home computer
115 parts48 - 2 layers230 × 116 mm

- 2 layers22 × 71 mm

- 2 layers89.6 × 79 mm

TDR 5351 core
MR-DOS/TDR_diploma_thesis
Time domain reflectometer. Includes Hardware, firmware and GUI in Octave. Also a diploma thesis.
199 parts33GPL-3.0
Questions
How big is the Integ Temp Current Pressure PCB?
It measures 57.5 × 38.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Integ Temp Current Pressure use?
47 parts, built around the AMS1117. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Integ Temp Current Pressure KiCad files?
From the lactobacil/DALI_STM32 repository on GitHub, at the commit this page was made from: the board is Integ_Temp_Current_Pressure.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Integ Temp Current Pressure design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).