

Coughsense
Detecting some coughs
- Size
- 35.2 × 59.1 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 89
- Nets
- 99
- Pads
- 341
- Tracks, vias
- 696, 79
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 2 Dec 2015
- Updated
- 25 Jul 2017
Overview
Coughsense is an open-source printed circuit board by lab11, from the lab11/CoughNote repository on GitHub. It is a 4-layer board of 35.2 × 59.1 mm with 89 parts on 99 nets, routed with 696 tracks and 79 vias.
It is built around the MIC863BM8, AD7680ARM and ICS-40310, with the ISL60002CIH312Z-TK, MAX13035EETE+ and MCP73831T-2ACI/OT-HXY among its other parts. Its parts include 37 capacitors, 22 resistors, 15 ICs, 4 connectors and 1 diode.
Main components
9MIC863BM8
SOT-23-8-40℃~+85℃ 10pA 2 23mA 2V~5.25V 350V/ms 5pA 6mV 6uV/℃ 8.4uA 85dB Built-in compensation Rail-to-rail output SOT-23-8 Operational AmplifierMicrochip TechnologyOperational AmplifierAD7680ARM
MSOP83mW, 100kSPS, 16-Bit ADCAnalog DevicesUncategorisedICS-40310
--37dB 25uA 4.5kΩ 64dB 900mV~1.3V Omnidirectional - MEMS Microphones ROHSTDK InvenSenseMEMS MicrophonesISL60002CIH312Z-TK
SOT-23-3-40℃~+85℃@(Ta) 1.25V 2.7V~5.5V 20ppm/℃ 30uVp-p 7mA 900nA Fixed Series SOT-23-3 Voltage Reference ROHSRenesas ElectronicsVoltage ReferenceMAX13035EETE+
TQFN-16(4x4)-40℃~+85℃ 1 1.62V~3.2V 100Mbps 2.2V~3.6V 6 Bidirectional Level translator Output enable high-impedance、Integrated pull-up resistor Push-Pull、Open-drain TQFN-16(4x4) Translators, Level Shifters ROHSMaxim Integrated (Analog Devices)Translators, Level ShiftersMCP73831T-2ACI/OT-HXY
SOT-23-5LBattery ManagementHXY MOSFETSPU0410LR5H-QB
SMD,3.0x3.76-38dB -40℃~+100℃ 1.1mm 1.5V~3.6V 120uA~160uA 3.76mm 3mm 400Ω 63dB Omnidirectional Omnidirectional pickup SMD,3.0x3.76 MEMS Microphones ROHSKnowlesMEMS MicrophonesSPV1840LR5H-B
--38dB 1.5V~3.6V 400Ω 60uA 62.5dB Omnidirectional - MEMS Microphones ROHSKnowlesMEMS MicrophonesCL-SB-13C-01
插件Slide SwitchesNidec
Parts
89| Qty | Value | Footprint | References |
|---|---|---|---|
| 21 | C_0.1u_0402_10V_10%_JB | Capacitors_SMD:C_0402 | C3, C10, C12, C13, C14, C17, C19, C21, C22, C24, C26, C27, C28, C31, C32, C35 +5 |
| 12 | GENERIC_R_0402 | Resistors_SMD:R_0402 | R3, R4, R6, R11, R13, R19, R20, R21, R22, R23, R24, R25 |
| 9 | TEST_1P | lab11-connectors:Testpoint | W1, W2, W3, W4, W5, W6, W7, W8, W9 |
| 5 | C_10u_0603_10V_10%_JB | Capacitors_SMD:C_0603 | C9, C11, C23, C29, C37 |
| 3 | GENERIC_C_0402 | Capacitors_SMD:C_0402 | C16, C18, C33 |
| 2 | C_1u_0402_10V_10%_JB | Capacitors_SMD:C_0603 | C25, C30 |
| 2 | C_4.7u_0402_10V_10%_X5R | Capacitors_SMD:C_0402 | C1, C2 |
| 2 | C_47p_0402_1%_C0G,NP0 | Capacitors_SMD:C_0402 | C15, C20 |
| 2 | MIC863 | lab11-ic:SOT-23-8 | U6, U14 |
| 2 | R_100K_0402_0.5%,25ppm/c,0.063W | Resistors_SMD:R_0402 | R7, R9 |
| 2 | R_10k_0402_1%,100ppm/c,0.063W | Resistors_SMD:R_0402 | R10, R15 |
| 2 | R_499K_0402_1%,100ppm/c,0.063W | Resistors_SMD:R_0402 | R5, R8 |
| 2 | TS881 | TO_SOT_Packages_SMD:SC-70-5 | U5, U15 |
| 1 | AD7680 | TO_SOT_Packages_SMD:SOT-23-6 | U13 |
| 1 | ADP160AUJZ-1.2-R7 | lab11-ic:TSOT-5 | U9 |
| 1 | CL-SB_13C | lab11-switches:CL-SB-12C | SW1 |
| 1 | CONN_01X02 | Pin_Headers:Pin_Header_Straight_1x02 | P2 |
| 1 | CONN_01X03 | Pin_Headers:Pin_Header_Straight_1x03 | P1 |
| 1 | C_10u_0603_10V_tantalum | Capacitors_SMD:C_0603 | C8 |
| 1 | GENERIC_C_0603 | Capacitors_SMD:C_0603 | C34 |
| 1 | ICS-40310 | lab11-microphones:ICS-40310 | U11 |
| 1 | ISL60002CIH312Z-TK | lab11-ic:ISL60002 | U12 |
| 1 | JST_2_CONN_SIDE | lab11-connectors:CONN_JST-2_SMD_SIDE | J2 |
| 1 | LED_GREEN_0402_20mA | Capacitors_SMD:C_0402 | D1 |
| 1 | MAX13035E | lab11-ic:TQFN-16-4x4mm | U8 |
| 1 | MCP73831T-2ACI/OT | lab11-ic:SOT-23-5 | U2 |
| 1 | MicroSD | lab11-connectors:2201778-1 | J1 |
| 1 | R_0_0402_.1W | Resistors_SMD:R_0402 | R12 |
| 1 | R_1K_0402_1%,100ppm/c,0.2W | Resistors_SMD:R_0402 | R1 |
| 1 | R_200_0402_1%,100ppm/c,0.1W | Resistors_SMD:R_0402 | R14 |
| 1 | R_2K_0402_1%,100ppm/c,0.1W | Resistors_SMD:R_0402 | R2 |
| 1 | SPU0410LR5H-QB | lab11-microphones:SPU0410LR5H-QB | U4 |
| 1 | SPV1840LR5H-B | lab11-microphones:SPV1840LR5H-B | U10 |
| 1 | TXS0108E-Q1 | Housings_SSOP:TSSOP-20_4.4x6.5mm_Pitch0.65mm | U7 |
| 1 | edison_iot_module | lab11-mcu:intel_edison_compute_module | U3 |
| 1 | microUSB-B | lab11-connectors:MICRO_USB_RECEPTABLE | U1 |
More from lab11/CoughNote
5- 4 layers113.1 × 113.1 mm

- 4 layers119.5 × 130.1 mm

- 4 layers71.5 × 119.3 mm

- 4 layers33 × 33 mm

- 4 layers35.2 × 59.1 mm

Similar boards
- 2 layers44 × 35 mm

Ammeter rev-05
JonHylands/fxos-battery-harness
Repository for Battery Harness & Ammeter source/design files (CAD, PCB, etc)
54 parts5MPL-2.0 - 2 layers21.6 × 15.9 mm

- 2 layers96 × 22 mm

Device
jayis1/hardware-design-lab
Full-cycle hardware device designs — each device in its own subfolder with architecture, schematics, PCB layout, and software stack
11 parts - 2 layers23 × 14 mm

MEMS microphone
MarcelMG/MEMS_Microphone_SPU0410_PCB
A PCB design for prototyping the Knowles SPU0410 MEMS Ultrasonic Microphone
10 parts10MIT - 2 layers20 × 15 mm

SPU0410LR5H
meerstern/SPU0410LR_with_VariableAmp
[1]: https://www.digikey.jp/product-detail/ja/knowles/SPU0410LR5H-QB-7/423-1139-1-ND/2420983 "1" [0]: http://www.tij.co.jp/product/jp/TLV316 "0" [2]: https://www.switch-science.com/products/6583 [3]…
13 parts3 - 2 layers71 × 35 mm

- 2 layers20 × 15 mm

- 2 layers20 × 15 mm

SPU0410LR5H
meerstern/SPU0410LR_with_Amp
The Converter board of Kicad Data for SPU0410LR with Apmlifer
13 parts2MIT
Questions
How big is the Coughsense PCB?
It measures 35.2 × 59.1 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Coughsense use?
89 parts, built around the MIC863BM8, AD7680ARM, ICS-40310 and ISL60002CIH312Z-TK. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Coughsense KiCad files?
From the lab11/CoughNote repository on GitHub, at the commit this page was made from: the board is hardware/CouchSense_v0.1/coughsense.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Coughsense design in my own project?
Its repository states no licence, so its author keeps all rights: ask lab11 before reusing the design.