
SPU0410LR5H
meerstern/SPU0410LR_with_Amp
The Converter board of Kicad Data for SPU0410LR with Apmlifer

[1]: https://www.digikey.jp/product-detail/ja/knowles/SPU0410LR5H-QB-7/423-1139-1-ND/2420983 "1" [0]: http://www.tij.co.jp/product/jp/TLV316 "0" [2]: https://www.switch-science.com/products/6583 [3]…
SPU0410LR5H is an open-source printed circuit board by meerstern, from the meerstern/SPU0410LR_with_VariableAmp repository on GitHub. It is a 2-layer board of 20 × 15 mm with 13 parts on 7 nets, routed with 110 tracks and 6 vias.
It is built around the LM321 and SPU0410LR5H-QB. Its parts include 4 capacitors, 3 resistors, 2 ICs and 1 connector.
SPU0410LR_with_VariableAmp
The Converter board of Kicad Data for SPU0410LR with Variable Apmlifer
最大約50倍の増幅回路TLV316とKnowles社製アナログ出力MEMSマイクSPU0410LR5Hを搭載した2.54mmピッチ変換基板です。
可聴音から超音波(100Hz~80kHz)までの幅広い帯域を高感度にセンシングすることが可能です。
超音波センサや超音波通信などに使用可能です。
RV1により約1倍~約50倍まで変更することが可能です。
アンプ回路を搭載することでArduinoといったマイコンのアナログ入力に直接接続できます。
マイク穴は基板裏面の丸印部分です。
電源電圧1.8V~3.6V
用途に応じて様々な製品をラインアップしています
| 製品名 | インタフェース | アンプ搭載有無 | 用途 |
|---|---|---|---|
| アナログ出力マイク | アナログ | 無 | 任意のアンプ回路を使用したい場合 |
| 可変アンプ内蔵アナログ出力マイク(本製品) | アナログ | 有(可変1~50倍) | 増幅率の調整が必要な場合 |
| アンプ内蔵アナログ出力マイク | アナログ | 有(固定50倍) | 一定した増幅が必要な場合 |
| デジタル出力マイク | デジタルPDM | 不要 | フルデジタルで実装する場合やワイドレンジが必要な場合 |
SPU0410LR5Hの生産完了に伴い、後継品のSPV0142LR5Hに移行しました(26年4月)。
License - MIT
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10k | generic:generic-SMD1608 | R1, R2, R3 |
| 2 | 4.7u | generic:generic-SMD1608 | C1, C2 |
| 2 | MountingHole_3mm | Mounting_Holes:MountingHole_3mm | REF1, REF2 |
| 1 | 0.1u | generic:generic-SMD1608 | C4 |
| 1 | 0.1u | smt:C-1206 | C3 |
| 1 | 500k | RV:rcl-RTRIMCVR42A | RV1 |
| 1 | Conn_01x03 | pin-head:pinhead-1X03 | P1 |
| 1 | LM321 | smd-semi:SC-70-5 | U2 |
| 1 | SPU0410LR5H | SPU0410LR5H:SPU0410LR5H | U1 |

meerstern/SPU0410LR_with_Amp
The Converter board of Kicad Data for SPU0410LR with Apmlifer

MarcelMG/MEMS_Microphone_SPU0410_PCB
A PCB design for prototyping the Knowles SPU0410 MEMS Ultrasonic Microphone





wzwqoo/Echometer
KiCad 10 project (v4.kicadpro, schematic + 4-layer PCB), fabrication outputs in fab/, BOM in v4.csv, and the parametric acoustic-horn generator ultrasonichornfreecad.py.

It measures 20 × 15 mm and has 2 copper layers, 1.6 mm thick.
13 parts, built around the LM321 and SPU0410LR5H-QB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the meerstern/SPU0410LR_with_VariableAmp repository on GitHub, at the commit this page was made from: the board is PCB/SPU0410LR5H.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask meerstern before reusing the design.