4 layers45.2 × 73.6 mm
2 layers88 × 65.6 mm
Mouse
L4-2/MODulo-SB- Size
- 88 × 65.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 81
- Nets
- 80
- Pads
- 330
- Tracks, vias
- 534, 79
- Pours
- 26
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 15 Aug 2025
- Updated
- 18 Aug 2025
Overview
Mouse is an open-source printed circuit board by L4-2, from the L4-2/MODulo-SB repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 88 × 65.6 mm with 81 parts on 80 nets, routed with 534 tracks and 79 vias.
It is built around the NRF24L01P-R, PMW3360DM-T2QU and TPS7A2133PQWDSGRQ1, with the USBLC6-2P6, SKRPABE010 and ECS-160-12-33Q-JES-TR among its other parts. Its parts include 10 resistors, 9 connectors, 9 switches, 6 ICs and 3 inductors. It belongs with the STM32 boards of this library.
Main components
9
NRF24L01P-R
QFN-20-EP(4x4)-40℃~+85℃ -82dBm 0dBm 1.9V~3.6V 11.3mA 13.5mA 2.4GHz 2.4GHz~2.525GHz 2Mbps ISM Power-on reset function、Supports RSSI function、CRC check function、Automatic response function、Automatic retransmission function SPI transceiver QFN-20-EP(4x4) RF Transceiver ICs ROHSNordic SemiconRF Transceiver ICs
PMW3360DM-T2QU
DIP-16Low-power mode、Interrupt output、Self-test function DIP-16 Specialized Sensors ROHSPixArtSpecialized Sensors
TPS7A2133PQWDSGRQ1
WSON-8-EP(2x2)-40℃~+150℃ 1 265mV@(500mA) 3.3V 500mA 6.5uA 6V 7.7uVrms 91dB@(1kHz) Fixed Over Current Protection、Thermal shutdown、Enable control、Input under-voltage protection、Output discharge、Built-in soft-start Positive WSON-8-EP(2x2) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsUncategorised
USBLC6-2P6
SOT-666-6-40℃~+125℃ 150nA 17V 2 3.5pF 5.25V 5A@8/20us 6V ESD IEC 61000-4-2 Unidirectional SOT-666-6 ESD and Surge Protection (TVS/ESD) ROHSSTMicroelectronicsESD And Surge Protection (TVS/ESD)
SKRPABE010
SMD-4P,4.2x3.2mm-30℃~+85℃ 1.6N 100,000 cycles 16V 2.5mm 3.2mm 4.2mm 50mA J-Lead Oval button SPST-NO Surface Mount,Vertical SMD-4P,4.2x3.2mm Tactile Switches ROHSALPSALPINETactile Switches
ECS-160-12-33Q-JES-TR
SMD3225-4P-40℃~+125℃ 12pF 16MHz 80Ω ±20ppm ±50ppm SMD3225-4P Crystals ROHSECSCrystals
ECS-80-12-30BQ-JES-TR
SMD5032-4P-40℃~+125℃ 100Ω 12pF 8MHz ±20ppm ±50ppm SMD5032-4P Crystals ROHSECSCrystals
FTSH-107-01-L-DV-K-A
SMD,P=1.27mm-55℃~+125℃ 1.27mm 14P 2 2x7P 3.05mm 3.4A Black Gold Phosphor bronze Pin Header Surface Mount,Vertical SMD,P=1.27mm Pin Headers ROHSSamtecPin Headers
USB4105-GF-A
SMD-40℃~+85℃ 1 12P 48V 5A Black Female Surface Mount, Right Angle Type-C USB 2.0 SMD USB Connectors ROHSGlobal Connector Technology (GCT)USB Connectors
Parts
81| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100n | Capacitor_SMD:C_0402_1005Metric | 100n, 100n, 100n, 100n, 100n, 100n, 100n, 100n, 100n, 100n |
| 6 | TestPoint | TestPoint:TestPoint_Pad_1.5x1.5mm | +3.3V , +1.9V, +VBUS, CH1, CH2, GND |
| 5 | 1u | Capacitor_SMD:C_0402_1005Metric | 1u, 1u, 1u, 1u, 1u |
| 5 | SW_Push_SPDT | Mouse:Huano | SW1, SW6, SW7, SW8, SW9 |
| 3 | 1n | Capacitor_SMD:C_0402_1005Metric | 1n, 1n, 1n |
| 3 | Conn_01x01_Pin | Connector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_Vertical | J8, PA2, PA10 |
| 3 | Conn_01x06_Pin | Connector_PinHeader_1.00mm:PinHeader_1x06_P1.00mm_Vertical | J1, J2, J9 |
| 3 | SKRPABE010 | SKRPABE010:SW_SKRPABE010 | S1, S2, S3 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric | R10k, R10k |
| 2 | 10u | Capacitor_SMD:C_0402_1005Metric | 10u, 10u |
| 2 | 14p | Capacitor_SMD:C_0402_1005Metric | 14p, 14p |
| 2 | 1k5 | Resistor_SMD:R_0402_1005Metric | R1k5, R2 |
| 2 | 22p | Capacitor_SMD:C_0402_1005Metric | 22p, 22p |
| 2 | 5k1 | Resistor_SMD:R_0402_1005Metric | R5k1, R5k1 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D1, D2 |
| 1 | 1.5p | Capacitor_SMD:C_0402_1005Metric | 1.5p |
| 1 | 10n | Capacitor_SMD:C_0402_1005Metric | 10n |
| 1 | 1421 | Resistor_SMD:R_0402_1005Metric | R1421 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric | R1M |
| 1 | 1p | Capacitor_SMD:C_0402_1005Metric | 1p |
| 1 | 2.2n | Capacitor_SMD:C_0402_1005Metric | 2.2n |
| 1 | 2.7n | Inductor_SMD:L_0402_1005Metric | L6 |
| 1 | 22k | Resistor_SMD:R_0402_1005Metric | R22k |
| 1 | 3.9n | Inductor_SMD:L_0402_1005Metric | L5 |
| 1 | 33n | Capacitor_SMD:C_0402_1005Metric | 33n |
| 1 | 4.7p | Capacitor_SMD:C_0402_1005Metric | 4.7p |
| 1 | 4.7u | Capacitor_Tantalum_SMD:CP_EIA-2012-12_Kemet-R | 4.7u |
| 1 | 4.7u | Capacitor_SMD:C_0402_1005Metric | 4.7u |
| 1 | 5.6 | Resistor_SMD:R_0402_1005Metric | R5.6 |
| 1 | 8.2n | Inductor_SMD:L_0402_1005Metric | L4 |
| 1 | Antenna | RF_Antenna:Texas_SWRA117D_2.4GHz_Left | AE2 |
| 1 | Conn_01x05_Pin | Connector_PinHeader_1.00mm:PinHeader_1x05_P1.00mm_Vertical | J3 |
| 1 | ECS-160-12-33Q-JES-TR | ECS_160_12_33Q_JES_TR:XTAL_ECS-160-12-33Q-JES-TR | Y1 |
| 1 | ECS-80-12-30BQ-JES-TR | ECS-80-12-30BQ-JES-TR:ECS-80-12_ECS | XTAL2 |
| 1 | FTSH-107-01-L-DV-K-A | FTSH_107_01_L_DV_K_A:SAMTEC_FTSH-107-01-L-DV-K-A | J12 |
| 1 | LOGO | LOGO | G*** |
| 1 | PMW3360DM-T2QU | PAW3395DM-T6QU_DS:PMW3360 | U12 |
| 1 | RotaryEncoder | Mouse:RotaryEncoder | SW14 |
| 1 | STM32L552CEUxP | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U14 |
| 1 | TLV70019_SOT23-5 | Package_TO_SOT_SMD:SOT-23-5 | U11 |
| 1 | TPS7A2133PQWDSGRQ1 | TPS7A2133PQWDSGRQ1:SON50P200X200X80-9N | IC1 |
| 1 | USB4105-GF-A | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J4 |
| 1 | USBLC6-2P6 | Package_TO_SOT_SMD:SOT-666 | U8 |
| 1 | nRF24L01P | Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm | U10 |
Questions
How big is the Mouse PCB?
It measures 88 × 65.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Mouse use?
81 parts, built around the NRF24L01P-R, PMW3360DM-T2QU, TPS7A2133PQWDSGRQ1 and USBLC6-2P6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mouse KiCad files?
From the L4-2/MODulo-SB repository on GitHub, at the commit this page was made from: the board is Mouse.kicad_pcb and its schematic Mouse.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mouse design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from L4-2/MODulo-SB
1Similar boards
- 4 layers81 × 81 mm
OBC
HernanIbarra60/OBC-
This project is an On-Board Computer (OBC) for a CubeSat. Its main core is a STM32F4 microcontroller.
131 parts - 2 layers68.6 × 53.3 mm
Eos atmega328p board
embeddedos-org/eCAD-Hardware-Products
Hardware designs + EE docs + Board datasheets of Multiple products
71 parts8MIT - 4 layers40.6 × 49.3 mm
Ledkiv4 1
JamPsym/letki
A new schematic simplification is in progress. See the next-iteration note for the checked 33 Ω candidate. This directory and its frozen exports still represent the previous 34 Ω circuit; the candidate has no…
135 parts - 2 layers152.1 × 70.1 mm
- 8 layers34 × 54.8 mm
- 8 layers45 × 70 mm
- 4 layers125 × 80 mm
- 2 layers50 × 31 mm
