

Numpad
A modular keyboard framework
- Size
- 123.8 × 142.9 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 119
- Nets
- 123
- Pads
- 579
- Tracks, vias
- 650, 163
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 5 Feb 2025
- Updated
- 10 Dec 2025
Overview
Numpad is an open-source printed circuit board by Kymkim, from the Kymkim/modular-kbd repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 123.8 × 142.9 mm with 119 parts on 123 nets, routed with 650 tracks and 163 vias.
It is built around the LD1117, 1N4148W and BAT60JFILM, with the PRTR5V0U2X among its other parts. Its parts include 56 diodes, 11 capacitors, 11 resistors, 5 switches and 2 ICs. It belongs with the keyboards and input boards of this library.
Main components
4LD1117
UncategorisedSTMicroelectronics1N4148W
SOD-123150mA 1A 1V@50mA 1uA@75V 400mW 4ns 75V Independent SOD-123 Switching Diodes ROHSSTMicroelectronicsSwitching DiodesBAT60JFILM
SOD-32310V 3A 580mV@1A 6uA@10V Independent SOD-323 Schottky Diodes ROHSSTMicroelectronicsSchottky DiodesPRTR5V0U2X
SOT-143-55℃~+125℃ 0.3pF、0.8pF 100W 10V、15V 5V 6.5V 6A 80nA ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Three channels Unidirectional SOT-143 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
README
README.mdMSKBD - Modularly Simple KeyBoarD
[!WARNING]
This is under development. If you want the latest developments check out thedevbranch.
A customizable modular keyboard system where each key cluster is its own module, connected through a grid-like commnication. The goal is to create a flexible keyboard that can scale, reconfigure layouts, and support hot-swapping modules.
Features
- 🧩 Modular design — attach modules in any direction
- 🎛️ Configurable firmware — master + module code, easily updated
- ⚡ Hotplug detection — modules can be discovered dynamically
Numpad Module

Repo Structure
├─firmware/ - Embedded code for the core system
├─hardware/ - Schematics and PCB layouts
├─software/ - Host tools (keymap editor, etc.) (not yet implemented - soon hopefully!)
├─docs/ - Design notes, communication protocol, build guides
└─assets/ - Renders, diagrams, and mediaBranch Structure
main # Stable, production-ready code (only tested & reviewed changes go here)
│
├─ dev # Integration branch for features; "staging" area before merging to main
│ ├─ software-xxxxxx # New features, experiments, improvements, or PCB uploads
| ├─ firmware-xxxxxx # Please indicate in the branch the wether if its software
│ └─ hardware-xxxxxx # firmware, or hardware
│
├─ hotfix/ # Quick fixes for urgent bugs in main
│ └─ hotfix/usb-detection
│
└─ docs/ # Documentation updates
└─ docs/protocol-updateContributors
Parts
119| Qty | Value | Footprint | References |
|---|---|---|---|
| 27 | 1N4148W | PCM_Diode_SMD_AKL:D_SOD-123 | D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23, D24, D25 +11 |
| 27 | MX_SK6812MINI-E | PCM_marbastlib-mx:LED_MX_6028R | LED1, LED2, LED10, LED11, LED12, LED13, LED14, LED15, LED16, LED17, LED18, LED19, LED20, LED21, LED22, LED23 +11 |
| 26 | MX_SW_HS | PCM_marbastlib-mx:SW_MX_HS_CPG151101S11_1u | MACRO_A1, MACRO_B1, MACRO_C1, MACRO_D1, MACRO_E1, MACRO_F1, MACRO_G1, MACRO_H1, MACRO_I1, NUM_0, NUM_1, NUM_2, NUM_3, NUM_4, NUM_5, NUM_10 +10 |
| 6 | 22 | PCM_Resistor_SMD_AKL:R_0805_2012Metric | R3, R4, R6, R7, R8, R9 |
| 4 | 100nF | PCM_Capacitor_SMD_AKL:C_0805_2012Metric | C3, C4, C5, C6 |
| 4 | Conn_01x04 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | EAST, NORTH, SOUTH, WEST |
| 3 | MX_stab | PCM_marbastlib-mx:STAB_MX_P_2u | S1, S2, S3 |
| 2 | 1uF | PCM_Capacitor_SMD_AKL:C_0805_2012Metric | C7, C10 |
| 2 | 20pF | PCM_Capacitor_SMD_AKL:C_0805_2012Metric | C1, C2 |
| 2 | 5.1k | PCM_Resistor_SMD_AKL:R_0805_2012Metric | R1, R2 |
| 2 | DNP | PCM_Resistor_SMD_AKL:R_0805_2012Metric | R10, R13 |
| 1 | 0.1uF | PCM_Capacitor_SMD_AKL:C_0805_2012Metric | C11 |
| 1 | 10k | PCM_Resistor_SMD_AKL:R_0805_2012Metric | R5 |
| 1 | 10uF | PCM_Capacitor_SMD_AKL:C_0805_2012Metric | C8 |
| 1 | 4.7uF | PCM_Capacitor_SMD_AKL:C_0805_2012Metric | C9 |
| 1 | 8MHz | PCM_Crystal_AKL:Crystal_HC52-U_Vertical | Y1 |
| 1 | BAT60JFILM | PCM_Diode_SMD_AKL:D_SOD-323 | D2 |
| 1 | Conn_01x06 | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Horizontal | J1 |
| 1 | Ferrite_Bead | PCM_Fuse_AKL:Fuse_0805_2012Metric_Pad1.15x1.40mm_BigPads | FB1 |
| 1 | HRO-TYPE-C-31-M-12 | Type-C.pretty-master:HRO-TYPE-C-31-M-12-HandSoldering | USB1 |
| 1 | LD1117 | PCM_4ms_Package_SOT:SOT223 | IC1 |
| 1 | PRTR5V0U2X | PCM_Package_TO_SOT_SMD_AKL:SOT-143_Handsoldering | D1 |
| 1 | Push_Button | PCM_marbastlib-various:SW_SPST_SKQG_WithStem | SW2 |
| 1 | ROT_SKYLOONG_HS | PCM_marbastlib-various:ROT_SKYLOONG_HS-Switch | SW1 |
| 1 | ~ | footprints:LQFP64-10x10mm | U1 |
More from Kymkim/modular-kbd
1- 2 layers

Similar boards
- 2 layers43 × 35 mm

LYFT CTRL
mgkoenig/lyft
LYFT is a sophisticated remote control for your IKEA BEKANT desk.
43 parts88GPL-3.0 - 2 layers243.9 × 136.5 mm

Barobord
sadekbaroudi/barobord
I have spent a lot of time and money designing prototypes, testing, developing, etc. Any contributions would be greatly appreciated!
157 parts57 - 2 layers227.3 × 84.9 mm

Stm32 hotswap chiffre
sporkus/le_chiffre_keyboard_stm32
Le Chiffre keyboard pcb with stm32F072
110 parts53CERN-OHL-W-2.0 - 2 layers307.3 × 148.3 mm

- 2 layers298.8 × 122 mm

Ursaminor pcb
markstory/ursa-minor-keyboard
Design and schematics for the ursaminor keyboard
225 parts23 - 2 layers266.7 × 77 mm

KB Lightbar 1 straight
melonbred/open-source-projects
This is a repository for all open-sourced or available files for my projects. PCBs will typically have their own repository linked in the table below.
146 parts16MIT - 2 layers144 × 121.4 mm

Pando left
jyap808/pando
58 key split keyboard. Integrated STM32G0B1KBT6, USB-C interconnect, PCA9555 IO Expander design
89 parts13 - 2 layers286.4 × 96.1 mm

VoidHHKB Solder
hungrygeek/HSKB
Open-source HHKB-layout MX custom keyboard — KiCad PCB, case STL, QMK/VIA firmware. Personal iteration of the HSKB (Happy Sabi Keyboard).
163 parts5
Questions
How big is the Numpad PCB?
It measures 123.8 × 142.9 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Numpad use?
119 parts, built around the LD1117, 1N4148W, BAT60JFILM and PRTR5V0U2X. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Numpad KiCad files?
From the Kymkim/modular-kbd repository on GitHub, at the commit this page was made from: the board is hardware/numpad/numpad/numpad.kicad_pcb and its schematic hardware/RGBnumpad/RGBnumpad/RGBnumpad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Numpad design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).