

FireFlyV2 2
PCB for the FireFly LED Controller
- Size
- 62 × 10.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 58
- Nets
- 84
- Pads
- 238
- Tracks, vias
- 654, 109
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 30 May 2022
- Updated
- 15 Aug 2025
Overview
FireFlyV2 2 is an open-source printed circuit board by kylaro, from the kylaro/firefly-led-controller repository on GitHub. It is a 4-layer board of 62 × 10.5 mm with 58 parts on 84 nets, routed with 654 tracks and 109 vias.
It is built around the ESP32-C3FH4, RP2040 and W25Q128JVSIQ, with the AMS1117-3.3, LMD4737T263-OY1 and RFANT3216120A5T among its other parts. Its parts include 24 capacitors, 15 resistors, 7 connectors, 4 ICs and 2 diodes. It belongs with the ESP32, RP2040 and RISC-V boards of this library.
Main components
6ESP32-C3FH4
QFN-32-EP(5x5)160MHz 32 Bit 3V~3.6V 400KB RISC-V Watchdog reset、Software reset、Built-in general-purpose timer、Programmable watchdog、Built-in temperature sensor、True random number generator (TRNG)、Storage encryption、Infrared remote control QFN-32-EP(5x5) Microcontrollers (MCU/MPU/SOC) ROHSEspressif SystemsMicrocontrollers (MCU/MPU/SOC)RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsLMD4737T263-OY1
SMD-6P,4.7x3.8mm-26dB -40℃~+100℃ 1.25mm 1.6V~3.6V 3.76mm 4.72mm 57dB 750uA Omnidirectional Omnidirectional pickup SMD-6P,4.7x3.8mm MEMS Microphones ROHSLinkMemsMEMS MicrophonesRFANT3216120A5T
1206-40℃~+85℃ 1.2mm 1.55mm 1.6mm 100MHz 2 2.4GHz 2dBi 3.2mm 1206 Antennas ROHSWalsin TechnologyAntennas
Parts
58| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C3, C4, C5, C9, C10, C12, C13, C16, C20, C24, C26 |
| 5 | 10K | Resistor_SMD:R_0402_1005Metric | R2, R9, R12, R15, R16 |
| 4 | 22R | Resistor_SMD:R_0402_1005Metric | R1, R5, R11, R13 |
| 3 | 10uF | Capacitor_SMD:C_0603_1608Metric | C15, C18, C19 |
| 3 | PROG | External_Library:USB_PROG_PAD | J1, J2, J11 |
| 2 | 1.5pF | Capacitor_SMD:C_0402_1005Metric | C21, C22 |
| 2 | 10pF | Capacitor_SMD:C_0402_1005Metric | C23, C25 |
| 2 | 15pF | Capacitor_SMD:C_0402_1005Metric | C8, C11 |
| 2 | 1u | Capacitor_SMD:C_0402_1005Metric | C6, C7 |
| 2 | 220R | Resistor_SMD:R_0402_1005Metric | R6, R17 |
| 2 | PLED | External_Library:PIXEL-LED-PAD-3 | J3, J4 |
| 2 | PLED | External_Library:PIXEL-LED-PAD-4 | J6, J9 |
| 1 | 0R | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | 12MHz, X322512MSB4SI | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 1K | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 2.2u | Capacitor_SMD:C_0402_1005Metric | C2 |
| 1 | 2.7nH | Inductor_SMD:L_0402_1005Metric | L1 |
| 1 | 200R | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 40MHz, X252040MMB4SI | Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm | Y2 |
| 1 | 470R | Resistor_SMD:R_0402_1005Metric | R10 |
| 1 | 6.8nH | Inductor_SMD:L_0402_1005Metric | L2 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | ESP32-C3FH4 | External_Library:ESP32-C3FH4 | U5 |
| 1 | LED, RED | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | LED, Yellow | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | LMD4737T263-OY1 | easyeda2kicad:LGA-6_L4.7-W3.8-P1.65_LMD4737T | MIC1 |
| 1 | RFANT3216120A5T | External_Library:FILTER-SMD_1206-2P-L3.2-W1.6-L | AE1 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U3 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.275x5.275mm_P1.27mm | U2 |
More from kylaro/firefly-led-controller
6- 4 layers67.7 × 10.5 mm

- 4 layers70 × 10.5 mm

- 4 layers75 × 22 mm

- 4 layers58.3 × 26.2 mm

- 4 layers58.3 × 26.2 mm

- 2 layers63.2 × 43.1 mm

Similar boards
- 2 layers78 × 60 mm

- 4 layers72.6 × 170 mm

OpenJBOD RP2040
OpenJBOD/rp2040
This repository contains the hardware design files OpenJBOD RP2040 Baseboard.
129 parts87CERN-OHL-P-2.0 - 2 layers352.5 × 120 mm

PyKey87
jpconstantineau/PyKey60
The PyKey60 is a custom programmable mechanical keyboard with a standard ANSI 60% keyboard layout compatible with any cases made for the GH60. The PyKey60 uses mechanical switches (Cherry MX type).
310 parts57 - 2 layers36 × 43 mm

Asac fc rev a
victorhook/asac-fc
asac fc is an rp2040 based flight controller made for FPV drone flying
119 parts52GPL-3.0 - 2 layers55.4 × 34.5 mm

- 2 layers144 × 98 mm

RP2040 Board V1.0
MReavley/CyberSliceKeyboard
42/36 key ergo split keyboard using a RP2040
92 parts30MIT - 4 layers44.2 × 84.5 mm

- 2 layers95 × 67 mm

1e3c0a280b22034a487261aa2451d276e8631e8a0f44761d6a49a571b81d7071
autonomous-ai/autonomous-circuit
Chat with AI, get a verified PCB and a fab packet you can order.
51 parts14MIT
Questions
How big is the FireFlyV2 2 PCB?
It measures 62 × 10.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the FireFlyV2 2 use?
58 parts, built around the ESP32-C3FH4, RP2040, W25Q128JVSIQ and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FireFlyV2 2 KiCad files?
From the kylaro/firefly-led-controller repository on GitHub, at the commit this page was made from: the board is FireFlyV2_2/FireFlyV2_2.kicad_pcb and its schematic FireFlyV0/FireflyV0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the FireFlyV2 2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask kylaro before reusing the design.