

FireFlyV1 2
PCB for the FireFly LED Controller
- Size
- 58.3 × 26.2 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 48
- Nets
- 56
- Pads
- 229
- Tracks, vias
- 495, 73
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 30 May 2022
- Updated
- 15 Aug 2025
Overview
FireFlyV1 2 is an open-source printed circuit board by kylaro, from the kylaro/firefly-led-controller repository on GitHub. It is a 4-layer board of 58.3 × 26.2 mm with 48 parts on 56 nets, routed with 495 tracks and 73 vias.
It is built around the RP2040, W25Q32JVSSIQ and AMS1117-3.3, with the PEC12R-4215F-S0024, TS-1187A-B-A-B and KT-0603R among its other parts. Its parts include 20 capacitors, 12 resistors, 4 ICs, 2 switches and 1 diode. It belongs with the RP2040 boards of this library.
Main components
11RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)W25Q32JVSSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 133MHz 1uA 2.7V~3.6V 20 Years 32Mbit 3ms SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsPEC12R-4215F-S0024
插件-30℃~+70℃ 10mA 24/24 5V Incremental Right-Angle Support Two-phase output 插件 Rotary Encoders ROHSBournsRotary EncodersTS-1187A-B-A-B
SMD-4P,5.1x5.1mm-30℃~+85℃ 1.5mm 1.6N 100,000 cycles 12V 5.1mm 5.1mm 50mA Gold No Round Button SPST Surface Mount,Vertical Without Bracket SMD-4P,5.1x5.1mm Tactile Switches ROHSXKB ConnectionTactile SwitchesKT-0603R
0603-40℃~+85℃ 1.6mm x 0.8mm square LED 1.8V~2.4V 120° 20mA 300mcd 40mW 615nm~630nm 645nm Discrete Diode Red Water Clear 0603 LED Indication - Discrete ROHSHubei KENTO ElecLED Indication - DiscreteLMD4737T263-OY1
SMD-6P,4.7x3.8mm-26dB -40℃~+100℃ 1.25mm 1.6V~3.6V 3.76mm 4.72mm 57dB 750uA Omnidirectional Omnidirectional pickup SMD-6P,4.7x3.8mm MEMS Microphones ROHSLinkMemsMEMS MicrophonesMP34DT05TR-A
HCLGA-4LD(3x4)-26dB -40℃~+85℃ 1.8V 1mm 3mm 4mm 64dB 650uA Omnidirectional Omnidirectional pickup HCLGA-4LD(3x4) MEMS Microphones ROHSSTMicroelectronicsMEMS MicrophonesPTV09A-4020F-B104
Through hole1 50mW ±20% Through hole Potentiometers, Variable Resistors ROHSBournsPotentiometers & Variable ResistorsUSB-TYPE-C-018
SMD-25℃~+85℃ 1 10000 times 16P 3A 5V 7.35mm Female Surface Mount, Right Angle Type-C SMD USB Connectors ROHSDEALONUSB ConnectorsX322512MSB4SI
SMD3225-4P-40℃~+85℃ 12MHz 20pF 80Ω Crystal Oscillator ±10ppm ±20ppm SMD3225-4P Crystals ROHSYXCCrystals
Parts
48| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100nF | Capacitor_SMD:C_0402_1005Metric | C5, C6, C13, C14, C15, C16, C17, C18, C20, C21 |
| 3 | 10uF | Capacitor_SMD:C_0402_1005Metric | C3, C4, C8 |
| 3 | ledstrip_3pin_10mm | mouser:ledstrip_3pin_withpins | LEDS1, LEDS2, LEDS3 |
| 2 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C9, C10 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric | R24, R25 |
| 2 | 15pF | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 2 | 1K | Resistor_SMD:R_0402_1005Metric | R5, R7 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric | C11, C12 |
| 2 | 22 | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 2 | 220 | Resistor_SMD:R_0402_1005Metric | R12, R13 |
| 2 | 5.1K | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | TS-1187A-B-A-B | easyeda2kicad:SW-SMD_4P-L5.1-W5.1-P3.70-LS6.5-TL-2 | SW1, SW2 |
| 1 | 0 | Resistor_SMD:R_0402_1005Metric | R14 |
| 1 | 10K | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C19 |
| 1 | AMS1117-3.3 | easyeda2kicad:SOT-223-3_L6.5-W3.4-P2.30-LS7.0-BR | U3 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | KT-0603R | easyeda2kicad:LED0603-RD | LED1 |
| 1 | LMD4737T263-OY1 | easyeda2kicad:LGA-6_L4.7-W3.8-P1.65_LMD4737T | MIC1 |
| 1 | MP34DT05TR-A | easyeda2kicad:MIC-SMD_5P-L3.0-W4.0-P0.85-BL | MIC2 |
| 1 | PEC12R-4215F-S0024 | mouser:PEC12R-4XXXF-SXXXX_court | U7 |
| 1 | PTV09A-4020F-B104 | mouser:PTV09A4020FB103 | VR1 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1 |
| 1 | USB-TYPE-C-018 | easyeda2kicad:USB-C_SMD-TYPE-C-31-M-12 | USB1 |
| 1 | W25Q32JVSS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U2 |
| 1 | X322512MSB4SI | easyeda2kicad:OSC-SMD_4P-L3.2-W2.5-BL | X1 |
More from kylaro/firefly-led-controller
6- 4 layers67.7 × 10.5 mm

- 4 layers70 × 10.5 mm

- 4 layers75 × 22 mm

- 4 layers58.3 × 26.2 mm

- 4 layers62 × 10.5 mm

- 2 layers63.2 × 43.1 mm

Similar boards
- 2 layers

8-ball badge
tylercrumpton/magic-8-badge
An Open Source CircuitPython-compatible PCB badge that can (maybe) tell the future!
90 parts2 - 2 layers34 × 24 mm

Reality from scratch motherboard
uwrealitylabs/Reality-from-scratch-motherboard
RP2040+ICM42688
50 parts1GPL-3.0 - 2 layers50 × 45 mm

- 4 layers140 × 70 mm

- 2 layers60 × 70 mm

Media controller
bgb-0/media-controller
Open-source USB-C media controller. RP2040, 3× MX hot-swap keys, EC11 encoder, SSD1306 OLED. KiCad + QMK.
42 parts1GPL-2.0 - 4 layers91.8 × 92 mm

- 4 layers130 × 105 mm

HomeDeck
Kilan777/HomeDeck
Jarvis HomeDeck: a Raspberry Pi CM4 carrier board and voice-assistant software for a 7-inch smart display (KiCad hardware, generated from Python, plus the Python/JS assistant)
228 parts1 - 4 layers120 × 80 mm

Questions
How big is the FireFlyV1 2 PCB?
It measures 58.3 × 26.2 mm and has 4 copper layers, 1.6 mm thick.
What parts does the FireFlyV1 2 use?
48 parts, built around the RP2040, W25Q32JVSSIQ, AMS1117-3.3 and PEC12R-4215F-S0024. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FireFlyV1 2 KiCad files?
From the kylaro/firefly-led-controller repository on GitHub, at the commit this page was made from: the board is FireFlyV1_2/FireFlyV1_2.kicad_pcb and its schematic FireFlyV0/FireflyV0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the FireFlyV1 2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask kylaro before reusing the design.