4 layers43.2 × 43.2 mm
2 layers65.5 × 74.6 mm
Shipometer
kwan3217/shipometerAnsible settings for shipometer
- Size
- 65.5 × 74.6 mm
- Copper layers
- 2
- Thickness
- 1.65 mm
- Parts
- 66
- Nets
- 153
- Pads
- 372
- Tracks, vias
- 653, 101
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 22 Dec 2025
- Updated
- 9 Jan 2026
Overview
Shipometer is an open-source printed circuit board by kwan3217, from the kwan3217/shipometer repository on GitHub, published under the BSD-3-Clause licence. It is a 2-layer board of 65.5 × 74.6 mm with 66 parts on 153 nets, routed with 653 tracks and 101 vias.
It is built around the ZED-F9R-01B, BME280 and ICM-20948, with the TXS0108EPW and ICM20948 among its other parts. Its parts include 19 capacitors, 11 connectors, 8 ICs, 8 diodes and 3 resistors. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
5ZED-F9R-01B
LGA-54(17x22)LGA-54(17x22) GNSS Modules ROHSu-bloxGNSS Modules
BME280
LGA-8(2.5x2.5)-40℃~+85℃ 0%RH~100%RH 1.71V~3.6V 1.8uA 16bit I2C、SPI ±0.5℃ ±3%RH LGA-8(2.5x2.5) Temperature and Humidity Sensor ROHSBoschTemperature And Humidity Sensor
ICM-20948
QFN-24(3x3)-40℃~+85℃ 0.5KB 1.71V~3.6V 16bit 8uA Accelerometer Gyroscope SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps QFN-24(3x3) Accelerometers ROHSTDK InvenSenseAccelerometers
TXS0108EPW
TSSOP-20-40℃~+85℃ 1 1.4V~3.6V 1.65V~5.5V 60Mbps 8 Automatic direction detection、Output enable high-impedance、Integrated pull-up resistor Bidirectional Level translator Push-Pull、Open-drain TSSOP-20 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level ShiftersICM20948
QFN-24_EP_3.0x3.0x0.4PDFN-24-EP(3.0x3.0) New Arrivals ROHSTDKUncategorised
Parts
66| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 1uF | Capacitor_SMD:C_0603_1608Metric | C116, C206, C208, C401, C405, C501, C505, C605, C617, C640, C801, C805 |
| 5 | 100nF | Capacitor_SMD:C_0603_1608Metric | C302, C308, C310, C313, C319 |
| 5 | Designed with | KwanSystems:Symbol_KiCAD-Logo_CopperAndSilkScreenTop_small | G103, G107, G202, G302, G702 |
| 3 | OSHW | KwanSystems:OSHW-Symbol_4x3.6mm_SolderMask | G203, G303, G703 |
| 3 | White | LED_SMD:LED_0603_1608Metric | D101, D103, D104 |
| 3 | github.com/kwan3217 | KwanSystems:KWAN_CIRCLE | G201, G301, G701 |
| 2 | 22pF | Capacitor_SMD:C_0603_1608Metric | C611, C612 |
| 2 | 330 | KwanSystems:R_Array_Convex_4x0402 | R101, R102 |
| 2 | Conn_01x06_Pin | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J701, J703 |
| 2 | Conn_01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J702, J704 |
| 2 | KwanSystems | KwanSystems:StKwansSoldermask | G102, G105 |
| 2 | OSHW | KwanSystems:OSHW-Symbol_6.7x6mm_SolderMask | G104, G106 |
| 2 | TCR2EF 1.8V | Package_TO_SOT_SMD:SOT-23-5 | U501, U801 |
| 2 | Yellow | LED_SMD:LED_0603_1608Metric | D141, D144 |
| 2 | ~ | KwanSystems:Stamp | J201, J301 |
| 1 | 10k | KwanSystems:R_Array_Convex_4x0402 | R103 |
| 1 | 12MHz | Crystal:Crystal_SMD_Abracon_ABM8G-4Pin_3.2x2.5mm | Y601 |
| 1 | 74LS138 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U102 |
| 1 | Axis | KwanSystems:Axis | G101 |
| 1 | BME280 | Package_LGA:Bosch_LGA-8_2.5x2.5mm_P0.65mm_ClockwisePinNumbering | U201 |
| 1 | BME280 | KwanSystems:StampPad | J105 |
| 1 | Blue | LED_SMD:LED_0603_1608Metric | D106 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J102 |
| 1 | Green | LED_SMD:LED_0603_1608Metric | D130 |
| 1 | ICM-20948 | Sensor_Motion:InvenSense_QFN-24_3x3mm_P0.4mm | U301 |
| 1 | ICM20948 | KwanSystems:StampPad | J104 |
| 1 | LPC210x | Package_QFP:LQFP-48_7x7mm_P0.5mm | U601 |
| 1 | Raspberry_Pi_40 | KwanSystems:PiHAT_NoSlot_Narrow | J101 |
| 1 | Red | LED_SMD:LED_0603_1608Metric | D129 |
| 1 | TCR2EF 3.3V | Package_TO_SOT_SMD:SOT-23-5 | U401 |
| 1 | TXS0108EPW | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U302 |
| 1 | ZED-F9R | SparkfunBreakout:ZED-F9R | J106 |
Questions
How big is the Shipometer PCB?
It measures 65.5 × 74.6 mm and has 2 copper layers, 1.65 mm thick.
What parts does the Shipometer use?
66 parts, built around the ZED-F9R-01B, BME280, ICM-20948 and TXS0108EPW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Shipometer KiCad files?
From the kwan3217/shipometer repository on GitHub, at the commit this page was made from: the board is hardware/kicad/shipometer.kicad_pcb and its schematic hardware/kicad/BME280 stamp.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Shipometer design in my own project?
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers90 × 50 mm
- 4 layers75 × 59.2 mm
Data logger
Mutzi1211/Wasserrakete
Ein Überblick über alle Projektbestandteile – von CAD über Code bis zu Anforderungen und Abgaben.
65 parts1 - 2 layers115.8 × 160.2 mm
- 2 layers596.2 × 506.1 mm
SLI HW
dgramop/SLI-HW
Hardware files for Oakton High School's entry into NASA's Student Launch Initiative
128 parts2MIT - 2 layers77.7 × 75.9 mm
- 6 layers50 × 50 mm
- 6 layers145 × 43.4 mm
