2 layers596.2 × 506.1 mm
SLI HW
dgramop/SLI-HW
Hardware files for Oakton High School's entry into NASA's Student Launch Initiative
128 parts2MIT
2 layers77.7 × 75.9 mm
V2SLI
dgramop/v2SLI1Rev 2 of the PCB I developed for my NASA SLI team
- Size
- 77.7 × 75.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 69
- Nets
- 166
- Pads
- 380
- Tracks, vias
- 958, 142
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 17 Feb 2020
- Updated
- 8 Mar 2020
Overview
V2SLI is an open-source printed circuit board by dgramop, from the dgramop/v2SLI repository on GitHub. It is a 2-layer board of 77.7 × 75.9 mm with 69 parts on 166 nets, routed with 958 tracks and 142 vias.
It is built around the BMP388 and ICM20948. Its parts include 23 connectors, 13 resistors, 8 capacitors, 8 ICs and 5 diodes. It belongs with the STM32 boards of this library.
Main components
2Parts
69| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | R | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13 |
| 5 | C | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C4, C5, C6, C7 |
| 5 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2, D3, D4, D5 |
| 3 | SW_Push | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW1, SW2, SW3 |
| 2 | BMP388 | BMP388:PQFN50P200X200X80-10N | U2, U3 |
| 2 | Boot 0 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J11, J15 |
| 2 | Boot 1 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J12, J13 |
| 2 | C VCAP | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C2, C3 |
| 2 | Conn_02x15_Top_Bottom | Connector_PinHeader_2.54mm:PinHeader_2x15_P2.54mm_Vertical | J8, J9 |
| 2 | SPI Bus | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3, J16 |
| 2 | UART1 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4, J19 |
| 1 | 205GPIOs | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | ADA746 | Connector_PinSocket_2.54mm:PinSocket_1x09_P2.54mm_Vertical | U6 |
| 1 | CAP | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C8 |
| 1 | Enable Fix | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J17 |
| 1 | GND RAIL | Connector_Wire:SolderWirePad_1x01_Drill2mm | J23 |
| 1 | GPIOs | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J18 |
| 1 | I2C1 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | ICM20948 | Package_DFN_QFN:QFN-24-1EP_3x3mm_P0.4mm_EP1.75x1.6mm | U4 |
| 1 | Inter-MCU Interrupts Header | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Inter-MCU UART Header | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | LOGO | images:rlbetter | G*** |
| 1 | LOGO | images:Untitled | G*** |
| 1 | LOGO | images:cougar | G*** |
| 1 | LOGO | images:iridium1000dpi | G*** |
| 1 | LOGO | images:kamannegative | G*** |
| 1 | Micro_SD_Card | 1140084168:1140084168 | J20 |
| 1 | Programming Header for 103 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J14 |
| 1 | Programming Header for 205 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J10 |
| 1 | Radio UART | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J21 |
| 1 | STM32F103C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U7 |
| 1 | STM32F205RETx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | TCR2EE185-SOT553 | Package_TO_SOT_SMD:SOT-553 | U5 |
| 1 | UART2 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | VCC RAIL | Connector_Wire:SolderWirePad_1x01_Drill2mm | J22 |
| 1 | Xbee | XBP9B-DPST-001:DIP2200W51P200L3294H279Q20P | U8 |
The 65 most common of 69 parts.
Questions
How big is the V2SLI PCB?
It measures 77.7 × 75.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the V2SLI use?
69 parts, built around the BMP388 and ICM20948. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the V2SLI KiCad files?
From the dgramop/v2SLI repository on GitHub, at the commit this page was made from: the board is v2SLI.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the V2SLI design in my own project?
Its repository states no licence, so its author keeps all rights: ask dgramop before reusing the design.
Similar boards
- 2 layers115.8 × 160.2 mm
- 2 layers65.5 × 74.6 mm
- 6 layers50 × 50 mm
- 6 layers145 × 43.4 mm
- 2 layers33 × 87.9 mm
Pcb bottom
NicolasFavero/AutonomousAircraftControlSystem
Embedded flight control and telemetry system for an autonomous aircraft prototype based on ESP32-S3.
15 parts1 - 8 layers38.5 × 38.5 mm
Flight Controller
rishikesh2715/STM32F7_FC
STM32F722RET6 Based Flight Controller with ICM-42688-P IMU, BMP388 Barometer, and much more!
133 parts57MIT - 4 layers66.4 × 66.4 mm
Rera
fdiwth/tvc-drone
This repository contains the documentation, hardware designs, and source code for a Thrust Vector Control (TVC) drone.
140 parts34GPL-3.0