
Flipdot H Bridge
comakingspace/FlipDotDisplay
They were bought at the Makerfaire Hannover 2016.

NTNU mechatronic practice project is an open-source printed circuit board by kw404, from the kw404/NTNU_mechatronic_practice_project repository on GitHub. It is a 2-layer board of 99.9 × 64.9 mm with 37 parts on 74 nets, routed with 352 tracks and 4 vias.
It is built around the L293D and 74HC595. Its parts include 20 connectors, 6 ICs, 4 resistors, 3 capacitors and 3 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | Screw_Terminal_01x02 | Connector:HANDSON_KF301-2P | J1, J15, J16, J17, J18, J19, J20 |
| 6 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J8, J9, J10, J11, J12, J13 |
| 4 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4, J5, J6, J7 |
| 3 | 10uf | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1, C2, C3 |
| 3 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R3, R4 |
| 3 | L293D | Package_DIP:DIP-16_W7.62mm_Socket | U5, U6, U7 |
| 3 | LED | LED_THT:LED_D3.0mm_FlatTop | D1, D2, D3 |
| 2 | 74HC595 | Package_DIP:DIP-16_W7.62mm_Socket | U3, U4 |
| 2 | Conn_01x08 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J2, J3 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | Arduino_Nano_v2.x | Module:Arduino_Nano | A1 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J14 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U2 |

comakingspace/FlipDotDisplay
They were bought at the Makerfaire Hannover 2016.

bmpc/esp8266_sprinkler_controller
Lawn irrigation control system with a ESP8266 and a solenoid for each sprinkler station



timohueser/Prosthetic_Hand
3D printable prototype of a 6 DOF prosthetic hand.



EthanSousaProjects/CBR_Custom_Cluster
A custom cluster design for my CBR 125RW6 (2006 carb model) to replace the old large mechanical cluster with a smaller simpler design.
It measures 99.9 × 64.9 mm and has 2 copper layers, 1.6 mm thick.
37 parts, built around the L293D and 74HC595. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the kw404/NTNU_mechatronic_practice_project repository on GitHub, at the commit this page was made from: the board is circuit/機電整合.kicad_pcb and its schematic car model/Mechatronics_Practice/Mechatronics_Practice.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask kw404 before reusing the design.