
Hyperion
adamhrnciar/hyperion-controller
Open-source controller for 150 g antweight combat robots: RP2354A, 2x DRV8231A, 2-4S, ELRS/CRSF/SBUS/iBUS/PPM input, IMU. KiCad 10, CERN-OHL-S-2.0.

An RP2354 cartridge for the Game Boy and Game Boy Color. Grove port for sensors and cameras. Design goal: make it cheap.
BerryMG is an open-source printed circuit board by kurogedelic, from the kurogedelic/BerryMG repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 2-layer board of 51 × 60.7 mm with 49 parts on 71 nets, routed with 369 tracks and 89 vias.
It is built around the RP2354A and ME6211C33M5G-N. Its parts include 21 capacitors, 12 resistors, 4 connectors, 2 ICs and 2 switches. It belongs with the retro computing and games boards and the RP2350 boards of this library.
An RP2354 cartridge for the Game Boy and Game Boy Color.

Status: work in progress. First prototype, still being routed. Nothing fabricated yet.
Design notes are in GUIDE.md.
Hardware: CERN-OHL-S v2. If you make something from this, keep
github.com/kurogedelic/BerryMG visible on it (licence section 4).
Card edge footprint and DMG-09 outline from kicad-gamepaks, CC BY 4.0 — NOTICE. RP2350 core layout from Raspberry Pi's RP2350A Minimal Board — NOTICE.
Routing by @squadtak.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100n | Capacitor_SMD:C_0402_1005Metric | C2, C4, C10, C11, C12, C13, C14, C15, C16, C17, C18, C24 |
| 4 | 1k | Resistor_SMD:R_0402_1005Metric | R6, R8, R9, R10 |
| 3 | 10u | Capacitor_SMD:C_0805_2012Metric | C1, C3, C19 |
| 2 | 15p | Capacitor_SMD:C_0402_1005Metric | C25, C26 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 2 | 33 | Resistor_SMD:R_Array_Convex_4x0402 | RN1, RN2 |
| 2 | 4.7k | Resistor_SMD:R_0402_1005Metric | R20, R21 |
| 2 | 4.7u | Capacitor_SMD:C_0402_1005Metric | C21, C23 |
| 2 | 4.7u | BerryMG:C_0402_1005Metric_small_pads | C20, C22 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW1, SW2 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 12MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 3.3u | BerryMG:L_pol_2016 | L1 |
| 1 | 33 | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | GB_Cartridge_Edge | Connector_GameBoy:GameBoy_GamePak_DMG-09_P1.50mm_Edge | J3 |
| 1 | GRN | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | Grove_4pin | Connector_JST:JST_PH_S4B-PH-SM4-TB_1x04-1MP_P2.00mm_Horizontal | J2 |
| 1 | ME6211C33M5 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | RP2354A | BerryMG:RP2350-QFN-60-1EP_7x7_P0.4mm_EP3.4x3.4mm_ThermalVias | U1 |
| 1 | SWD_1x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | TP_3V3 | TestPoint:TestPoint_Pad_1.5x1.5mm | TP1 |
| 1 | TP_AUDIO_IN | TestPoint:TestPoint_Pad_1.5x1.5mm | TP3 |
| 1 | TP_GND | TestPoint:TestPoint_Pad_1.5x1.5mm | TP2 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |

adamhrnciar/hyperion-controller
Open-source controller for 150 g antweight combat robots: RP2354A, 2x DRV8231A, 2-4S, ELRS/CRSF/SBUS/iBUS/PPM input, IMU. KiCad 10, CERN-OHL-S-2.0.


OpenDrone-hw/OpenFC-Lite-Mini
Open-source Betaflight flight controller. RP2354A, 20x20 mm, 6-layer, 3-6S, CERN-OHL-S-2.0.


jbilander/SF2000
Spitfire 2000, A low-end 42 MHz Accelerator with IDE and 4/8 MB fast RAM for the Amiga 2000 co-pro slot (or A500 through an adapter).

OpenDrone-hw/OpenAIO
Open-source AIO for 2-6S toothpick quads: flight controller, 4-in-1 AM32 ESC and ExpressLRS receiver, 25.5x25.5 mm.

starduststorm/motionhexa
PCB designs and code for a motion-reactive, battery-powered hexagonal glowy object.

OpenDrone-hw/OpenAIO-Whoop
Open-source 1S whoop AIO: flight controller, 4-channel brushless ESC, ExpressLRS receiver and analog VTX, 25.5x25.5 mm. Planned.
It measures 51 × 60.7 mm and has 2 copper layers, 1.6 mm thick.
49 parts, built around the RP2354A and ME6211C33M5G-N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the kurogedelic/BerryMG repository on GitHub, at the commit this page was made from: the board is BerryMG.kicad_pcb and its schematic 01_POWER_USB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).