

Mock orchestrator
custom 8bit microprocessor project
- Size
- 99.1 × 99.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 39
- Nets
- 36
- Pads
- 185
- Tracks, vias
- 246, 11
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 10 Dec 2024
- Updated
- 9 Sep 2026
Overview
Mock orchestrator is an open-source printed circuit board by ksmonkey123, from the ksmonkey123/8bit_computer repository on GitHub, published under the MIT licence. It is a 2-layer board of 99.1 × 99.1 mm with 39 parts on 36 nets, routed with 246 tracks and 11 vias.
Its parts include 24 switches, 3 resistors, 3 diodes and 3 transistors.
Parts
39| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +8 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 3 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3 |
| 3 | LED | LED_SMD:LED_0603_1608Metric | D1, D2, D3 |
| 3 | R | Resistor_SMD:R_0603_1608Metric | R1, R2, R3 |
| 2 | Conn_01x16 | Connector_IDC:IDC-Header_2x08_P2.54mm_Vertical | CMD_BUS1, DATA_BUS2 |
More from ksmonkey123/8bit_computer
12- 2 layers99.1 × 99.1 mm

- 2 layers99.1 × 99.1 mm

- 2 layers99.1 × 99.1 mm

- 2 layers99.1 × 99.1 mm

- 2 layers99.1 × 99.1 mm

- 2 layers99.1 × 99.1 mm

- 2 layers99.1 × 99.1 mm

- 2 layers99.1 × 99.1 mm

- 2 layers99.1 × 99.1 mm

- 2 layers99.1 × 99.1 mm

- 2 layers99.1 × 99.1 mm

- 2 layers99.1 × 99.1 mm

Similar boards
- 2 layers24.4 × 24.4 mm

OSO SWAT B1
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
39 parts2.1k - 2 layers100 × 33.5 mm

Breakout 48pin 174917-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
39 parts1.2k - 2 layers33 × 26 mm

VL53L1x pwm
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
39 parts915 - 2 layers43.4 × 18.8 mm

Usb sniffer lite
ataradov/usb-sniffer-lite
A simple USB sniffer based on Raspberry Pi RP2040
39 parts706BSD-3-Clause - 2 layers40 × 20 mm

ESP8266
windowsair/wireless-esp8266-dap
CMSIS-DAP compatible wireless debugger for ESP8266/ESP32/ESP32C3/ESP32S3. Optional 40MHz SPI acceleration, etc. 适配多种ESP芯片的无线调试器
39 parts690MIT - 2 layers100 × 70.3 mm

- 2 layers81.3 × 53.3 mm

RGB LED 1.4
lachlanA/eagle-to-kicad
Eagle SCH/LIB to KiCad SCH/LIB ULP conversion script
39 parts429GPL-2.0 - 2 layers65.7 × 44.8 mm

Questions
How big is the Mock orchestrator PCB?
It measures 99.1 × 99.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Mock orchestrator use?
39 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mock orchestrator KiCad files?
From the ksmonkey123/8bit_computer repository on GitHub, at the commit this page was made from: the board is circuits/pc-11_mock_orchestrator/mock_orchestrator.kicad_pcb and its schematic circuits/pc-01_dual_8bit_register/dual_8bit_register.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mock orchestrator design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).