Skip to the content
2 layers99.1 × 99.1 mmAlu logic, the printed circuit board in 3D

custom 8bit microprocessor project

Size
99.1 × 99.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
26
Nets
65
Pads
248
Tracks, vias
779, 24
Pours
3
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
10 Dec 2024
Updated
9 Sep 2026

Overview

Alu logic is an open-source printed circuit board by ksmonkey123, from the ksmonkey123/8bit_computer repository on GitHub, published under the MIT licence. It is a 2-layer board of 99.1 × 99.1 mm with 26 parts on 65 nets, routed with 779 tracks and 24 vias.

Its parts include 10 ICs, 6 capacitors, 3 resistors and 1 connector.

Parts

26
QtyValueFootprintReferences
5CCapacitor_SMD:C_0603_1608MetricC2, C3, C4, C5, C6
4MountingHole_PadMountingHole:MountingHole_3.2mm_M3_Pad_ViaH1, H2, H3, H4
2Conn_01x16Connector_IDC:IDC-Header_2x08_P2.54mm_HorizontalADDRESS_BUS1, DATA_BUS1
1100kResistor_SMD:R_0603_1608MetricR3
174HC244 driver1Package_DIP:DIP-20_W7.62mm_LongPadsU1
174HC244 driver2Package_DIP:DIP-20_W7.62mm_LongPadsU5
1C_PolarizedCapacitor_SMD:CP_Elec_5x5.3C1
1Conn_01x10Connector_IDC:IDC-Header_2x05_P2.54mm_HorizontalJ1
1bank1Resistor_SMD:R_0603_1608MetricR2
1bank2Resistor_SMD:R_0603_1608MetricR1
1gatesAPackage_DIP:DIP-14_W7.62mm_LongPadsU6
1gatesBPackage_DIP:DIP-14_W7.62mm_LongPadsU10
1iorHPackage_DIP:DIP-14_W7.62mm_LongPadsU8
1iorLPackage_DIP:DIP-14_W7.62mm_LongPadsU3
1notHPackage_DIP:DIP-14_W7.62mm_LongPadsU7
1notLPackage_DIP:DIP-14_W7.62mm_LongPadsU2
1primHPackage_DIP:DIP-14_W7.62mm_LongPadsU9
1primLPackage_DIP:DIP-14_W7.62mm_LongPadsU4

More from ksmonkey123/8bit_computer

12
  • 2 layers99.1 × 99.1 mmBus spy, the printed circuit board in 3D

    Bus spy

    ksmonkey123/8bit_computer

    custom 8bit microprocessor project

    92 parts1MIT
  • 2 layers99.1 × 99.1 mmDual 8bit register, the printed circuit board in 3D

    Dual 8bit register

    ksmonkey123/8bit_computer

    custom 8bit microprocessor project

    40 parts1MIT
  • 2 layers99.1 × 99.1 mmMock orchestrator, the printed circuit board in 3D

    Mock orchestrator

    ksmonkey123/8bit_computer

    custom 8bit microprocessor project

    39 parts1MIT
  • 2 layers99.1 × 99.1 mm16bit register, the printed circuit board in 3D

    16bit register

    ksmonkey123/8bit_computer

    custom 8bit microprocessor project

    36 parts1MIT
  • 2 layers99.1 × 99.1 mmIncrement register, the printed circuit board in 3D

    Increment register

    ksmonkey123/8bit_computer

    custom 8bit microprocessor project

    34 parts1MIT
  • 2 layers99.1 × 99.1 mmCommand decoder, the printed circuit board in 3D

    Command decoder

    ksmonkey123/8bit_computer

    custom 8bit microprocessor project

    34 parts1MIT
  • 2 layers99.1 × 99.1 mmPc-04 alu backplane, the printed circuit board in 3D

    Pc-04 alu backplane

    ksmonkey123/8bit_computer

    custom 8bit microprocessor project

    28 parts1MIT
  • 2 layers99.1 × 99.1 mmRam unit, the printed circuit board in 3D

    Ram unit

    ksmonkey123/8bit_computer

    custom 8bit microprocessor project

    25 parts1MIT
  • 2 layers99.1 × 99.1 mmSequencer, the printed circuit board in 3D

    Sequencer

    ksmonkey123/8bit_computer

    custom 8bit microprocessor project

    25 parts1MIT
  • 2 layers99.1 × 99.1 mmAlu adder, the printed circuit board in 3D

    Alu adder

    ksmonkey123/8bit_computer

    custom 8bit microprocessor project

    23 parts1MIT
  • 2 layers99.1 × 99.1 mmMicrocode, the printed circuit board in 3D

    Microcode

    ksmonkey123/8bit_computer

    custom 8bit microprocessor project

    18 parts1MIT

Similar boards

  • 2 layers57.3 × 19 mm11ua, the printed circuit board in 3D

    11ua

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    26 parts990GPL-3.0
  • 2 layers98 × 59.5 mmMCP23017 PCB, the printed circuit board in 3D

    MCP23017 PCB

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    26 parts915
  • 2 layers142.9 × 98.5 mmCantor MX, the printed circuit board in 3D

    Cantor MX

    diepala/cantor

    Cantor keyboard, a 42 key diodeless split keyboard.

    26 parts756GPL-3.0
  • 2 layers103.8 × 50 mmGalagino pcb set, the printed circuit board in 3D

    Galagino pcb set

    harbaum/galagino

    A Galaga, Pac-Man and Donkey Kong arcade emulator for the ESP32

    26 parts558
  • 2 layers20.3 × 34.8 mmL0 ESP32, the printed circuit board in 3D

    L0 ESP32

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    26 parts546MIT
  • 2 layers40.6 × 50.8 mmWALTsm, the printed circuit board in 3D

    WALTsm

    google/walt

    A device for measuring latency of physical sensors and outputs on phones and computers

    26 parts474Apache-2.0
  • 2 layers158.5 × 75 mmDoj v2, the printed circuit board in 3D

    Doj v2

    kelu124/echomods

    Open source ultrasound processing modules and building blocks

    26 parts463

Questions

How big is the Alu logic PCB?

It measures 99.1 × 99.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Alu logic use?

26 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Alu logic KiCad files?

From the ksmonkey123/8bit_computer repository on GitHub, at the commit this page was made from: the board is circuits/pc-06_alu_logic/alu_logic.kicad_pcb and its schematic circuits/pc-01_dual_8bit_register/dual_8bit_register.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Alu logic design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).