
Schema
Krypthick/Prototype-Bras-Continuum
Ce repo contient les schemas, les cartes imprimées, les codes sources, etc du projet.

Ce repo contient les schemas, les cartes imprimées, les codes sources, etc du projet.
GyroscopeBoard is an open-source printed circuit board by Krypthick, from the Krypthick/Prototype-Bras-Continuum repository on GitHub. It is a 2-layer board of 24 × 24 mm with 12 parts on 24 nets, routed with 40 tracks and 5 vias.
It is built around the ICM-20948 and RC0603FR-0710KL. Its parts include 3 capacitors, 2 resistors, 1 IC and 1 connector.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3 |
| 3 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1, TP2, TP3 |
| 2 | 4.7k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2 |
| 1 | Conn_01x04 | Footprints:CONN_A-6373-04A_MOL | J1 |
| 1 | ICM-20948 | Sensor_Motion:InvenSense_QFN-24_3x3mm_P0.4mm | U1 |

Krypthick/Prototype-Bras-Continuum
Ce repo contient les schemas, les cartes imprimées, les codes sources, etc du projet.

Krypthick/Prototype-Bras-Continuum
Ce repo contient les schemas, les cartes imprimées, les codes sources, etc du projet.

Krypthick/Prototype-Bras-Continuum
Ce repo contient les schemas, les cartes imprimées, les codes sources, etc du projet.

willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels


crnicholson/StratoSoar-MK3
StratoSoar MK3, an autonomous glider meant for high-altitudes, accessible to everyone

ras-marques/ImmersiveGloves
I want to share how I am making vr gloves using 2 Tundra Trackers, 2 interface boards and 12 inertial sensors.

BHDynamics/dynossat-edu-obc
DynOSSAT-EDU, educational PocketQube satellite On-Board Computer files



alexander-armitage/AURA-Hardware
AURA is a set of modular PCBs designed in KiCad for versatile robotics and aerospace applications — from drones and quadrupeds to rockets.
It measures 24 × 24 mm and has 2 copper layers, 1.6 mm thick.
12 parts, built around the ICM-20948 and RC0603FR-0710KL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Krypthick/Prototype-Bras-Continuum repository on GitHub, at the commit this page was made from: the board is Schemas/GyroscopeBoard/GyroscopeBoard.kicad_pcb and its schematic Schemas/DriverBoard/DriverBoard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Krypthick before reusing the design.