4 layers80.9 × 66.5 mm
Schema
Krypthick/Prototype-Bras-Continuum
Ce repo contient les schemas, les cartes imprimées, les codes sources, etc du projet.
81 parts
2 layers92 × 82 mm
DriverBoard
Krypthick/Prototype-Bras-ContinuumCe repo contient les schemas, les cartes imprimées, les codes sources, etc du projet.
- Size
- 92 × 82 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 39
- Nets
- 34
- Pads
- 150
- Tracks, vias
- 307, 61
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 23 May 2026
- Updated
- 29 May 2026
Overview
DriverBoard is an open-source printed circuit board by Krypthick, from the Krypthick/Prototype-Bras-Continuum repository on GitHub. It is a 2-layer board of 92 × 82 mm with 39 parts on 34 nets, routed with 307 tracks and 61 vias.
It is built around the RC0603FR-0710KL, APSG160ELL102MJB5S and LTST-C171KGKT, with the TEST-1(BK) among its other parts. Its parts include 13 resistors, 8 capacitors, 2 connectors and 1 diode.
Main components
4
RC0603FR-0710KL
UncategorisedUnknown maker
APSG160ELL102MJB5S
插件,D10xL11.5mm-55℃~+105℃ 1000uF 10mm 11.5mm 12mΩ 16V 20000hrs@105℃ 5.4A@100kHz 5mm Polarized Polymer ±20% Plugin,D10xL11.5mm Polymer Aluminum Capacitors ROHSNippon Chemi-ConPolymer Aluminum Capacitors
LTST-C171KGKT
0805-55℃~+85℃ 130° 20mA 2V 35mcd 571nm 574nm 75mW Discrete Diode Water Clear Yellow Green 0805 LED Indication - Discrete ROHSLite-OnLED Indication - DiscreteTEST-1(BK)
-UncategorisedMulticomp
Parts
39| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3, R5, R6, R7, R8, R11, R12, R14, R15, R16, R17 |
| 4 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C5, C6 |
| 4 | 100uF | Footprints:WCAP-ASLI_6.3X5.5_DXL_ | C3, C4, C7, C8 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4 |
| 4 | Pololu_Breakout_A4988 | Footprints:MODULE_A4988_STEPPER_MOTOR_DRIVER_CARRIER | A1, A2, A3, A4 |
| 4 | Stepper_Motor_bipolar | Footprints:CONN_SDA-41791_M450_04_MOL | M1, M2, M3, M4 |
| 1 | 1000uF | Footprints:CHEMI-JB5 | C_Bulk1 |
| 1 | 1k5 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9 |
| 1 | Conn_02x08_Counter_Clockwise | Footprints:CONN_7024616xx_MOL | J1 |
| 1 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | Test1A | TestPoint:TestPoint_Pad_2.5x2.5mm | TP1 |
| 1 | Test1B | TestPoint:TestPoint_Pad_2.5x2.5mm | TP2 |
| 1 | XT30 | Connector_AMASS:AMASS_XT30U-F_1x02_P5.0mm_Vertical | J2 |
More from Krypthick/Prototype-Bras-Continuum
3- 2 layers70 × 60 mm
Manette
Krypthick/Prototype-Bras-Continuum
Ce repo contient les schemas, les cartes imprimées, les codes sources, etc du projet.
22 parts - 2 layers24 × 24 mm
GyroscopeBoard
Krypthick/Prototype-Bras-Continuum
Ce repo contient les schemas, les cartes imprimées, les codes sources, etc du projet.
12 parts
Similar boards
- 2 layers102 × 103 mm
- 2 layers55 × 40.1 mm
First design
kian09/Guardian
A compact health monitoring device that is worn on the wrist. Its capabilities are measuring your heart rate and detecting accidental falls using an accelerometer.
55 parts - 2 layers85 × 98 mm
- 2 layers82.5 × 82.5 mm
EPS V1
BrownSpaceEngineering/PVDX-EPS_V1
Avionics files related to new overhauled EPS schematics, pcb design, and documentation
197 parts - 2 layers65 × 40 mm
VLO
dineshkiran97/Battery-Protected-Multi-Rail-Regulator-PCB
KiCad project for a battery-powered linear regulator board that generates two regulated rails (5V and 3.3V) from a single-cell battery input, with reverse-polarity protection and a power-on indicator.
19 partsMIT - 4 layers70.1 × 46.4 mm
Wireless switch
hkymstr/Wireless-switch
A fully wireless switch panel for a race car using two Raspberry Pi Pico 2 W boards. One board acts as the Transmitter (switch panel), the other as the Receiver (12 V output driver).
102 parts - 2 layers60 × 120 mm
KNEE CONTROLLER PCBA
Reemuson/KNEE-CONTROLLER-PCBA
GitHub Actions generates the manufacturing, schematic, test, and release packages.
203 parts - 2 layers21.6 × 80.6 mm
Questions
How big is the DriverBoard PCB?
It measures 92 × 82 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DriverBoard use?
39 parts, built around the RC0603FR-0710KL, APSG160ELL102MJB5S, LTST-C171KGKT and TEST-1(BK). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DriverBoard KiCad files?
From the Krypthick/Prototype-Bras-Continuum repository on GitHub, at the commit this page was made from: the board is Schemas/DriverBoard/DriverBoard.kicad_pcb and its schematic Schemas/DriverBoard/DriverBoard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DriverBoard design in my own project?
Its repository states no licence, so its author keeps all rights: ask Krypthick before reusing the design.