
Breakout jackpad
kryo-77/Jackpad
Jackpad is a modular slot machine macropad. Pull the lever and the slots spin and land on a set of macros for an app, either picked at random or chosen by you.

Jackpad is a modular slot machine macropad. Pull the lever and the slots spin and land on a set of macros for an app, either picked at random or chosen by you. Either way, you get the satisfying mechanical spin of a real slot machine. Snap on extra slots to make it as big as you need.
Slot jackpad is an open-source printed circuit board by kryo-77, from the kryo-77/Jackpad repository on GitHub. It is a 2-layer board of 41.6 × 45 mm with 22 parts on 20 nets, routed with 132 tracks and 0 vias.
It is built around the DRV8833PW. Its parts include 7 connectors, 5 capacitors, 3 resistors, 1 IC and 1 diode. It belongs with the keyboards and input boards and the ESP32 and RISC-V boards of this library.
Jackpad is a modular slot machine macropad. Pull the lever and the slots spin and land on a set of macros for an app, either picked at random or chosen by you. Either way, you get the satisfying mechanical spin of a real slot machine. Snap on extra slots to make it as big as you need.
Made this for https://halflife.hackclub.com/

Slots detaching / attaching:

Retro chrome

Classic casino

kicad_jackpad contains all the files for PCB/SCHEMATICS for main pcb and slot pcb.breakout_jackpad which is the main folder. It contains the main pcb files (breakout_jackpad.pro) as well as slot pcb files (inside slot_jackpad folder).
CAD contains folder Editable which has .step & .f3d files for the project.Printable contains .stl files.Folder CODE contains a main_pcb,ino.
It may or may no work and i have no way to test it but as hackclub requires it I did some code for all the components.
I used AI for AS5600 and MAX98357A as I've never worked with those before
NOTE: the quantities are per PCB


| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100nf | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C3, C7 |
| 2 | 4.7k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R1, R2 |
| 1 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R3 |
| 1 | 100uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1 |
| 1 | 10uf | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C4 |
| 1 | 1N5819 | Diode_THT:D_DO-41_SOD81_P2.54mm_Vertical_AnodeUp | D1 |
| 1 | 470uF | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C2 |
| 1 | Conn_01x03_Pin | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J7 |
| 1 | Conn_01x04_Pin | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J6 |
| 1 | DRV8833 | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J1 |
| 1 | ESP32-C3_SUPERMINI_TH | MODULE_ESP32-C3_SUPERMINI_TH:MODULE_ESP32-C3_SUPERMINI_TH | U1 |
| 1 | MR30 IN | Connector_AMASS:AMASS_MR30PW-FB_1x03_P3.50mm_Horizontal | J5 |
| 1 | MR30 OUT | Connector_AMASS:AMASS_MR30PW-FB_1x03_P3.50mm_Horizontal | J4 |
| 1 | i2c | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J2 |
| 1 | meow | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J3 |
| 1 | white_v2 | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW1 |
The 18 most common of 22 parts.

kryo-77/Jackpad
Jackpad is a modular slot machine macropad. Pull the lever and the slots spin and land on a set of macros for an app, either picked at random or chosen by you.


RoboticsBrno/Robutek
Robůtek je robotická platforma založená na čipu ESP32-S3. Je velice rozšitiřelný, ale ze základu umí jezdit, kreslit fixou, jezdit po čáře, pohybovat se bludištěm. Programování je přes Jaculus.


CWRUbotix/Micromouse-2023-24
A fully autonomous maze-solving not-quite-mouse-sized robot.

FIPATECH/CDFR26_PAMI
Open source firmware and PCB for a differential mobile robot (PAMI) based on ESP32-S3 - Coupe de France de Robotique

empriselab/mote
A low cost, high confidence mobile robot optimized for education.

interspecifics/ComunicacionesEspeculativas
Es un proyecto basado en una máquina que es capaz de observar y aprender de microorganismos para crear un score audiovisual a partir de los patrones que encuentre en su comportamiento.

nochkin/esp-line-follower
A simple educational project to build a line following 2WD robot
It measures 41.6 × 45 mm and has 2 copper layers, 1.6 mm thick.
22 parts, built around the DRV8833PW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the kryo-77/Jackpad repository on GitHub, at the commit this page was made from: the board is kicad_jackpad/breakout_jackpad/slot_jackpad/slot_jackpad.kicad_pcb and its schematic kicad_jackpad/breakout_jackpad/breakout_jackpad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask kryo-77 before reusing the design.