Skip to the content
2 layers53.5 × 31 mmPowersupplymodule, the printed circuit board in 3D

🚀 Designed a compact Breadboard Power Supply Module in KiCad featuring regulated 5V and 3.3V outputs using AMS1117 voltage regulators. The project includes schematic design, PCB layout, routing, and 3D visualization. Ideal for electronics prototyping, embedded systems, and IoT development. ⚡🔧

Size
53.5 × 31 mm
Copper layers
2
Thickness
1.6 mm
Parts
19
Nets
13
Pads
48
Tracks, vias
76, 0
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
2 Jun 2026
Updated
2 Jun 2026

Overview

Powersupplymodule is an open-source printed circuit board by kripamaurya, from the kripamaurya/Breadboard-Power-Supply-Module repository on GitHub. It is a 2-layer board of 53.5 × 31 mm with 19 parts on 13 nets, routed with 76 tracks and 0 vias.

It is built around the AMS1117-3.3 and AMS1117-5.0. Its parts include 6 capacitors, 4 connectors, 3 resistors, 3 diodes and 2 ICs. It belongs with the power boards of this library.

Main components

2

README

README.md

⚡ Breadboard Power Supply Module

A compact and efficient breadboard power supply module designed in KiCad, providing stable 5V and 3.3V regulated outputs for electronics prototyping and embedded projects.


🚀 Features

✅ Dual regulated outputs (5V & 3.3V)

✅ AMS1117 Voltage Regulators

✅ DC Barrel Jack Power Input

✅ Power Status LEDs

✅ Filter Capacitors for Stable Output

✅ Breadboard Compatible Design

✅ Compact PCB Layout


🛠 Hardware Used

ComponentQuantity
AMS1117-5.01
AMS1117-3.31
DC Barrel Jack1
LEDs3
Resistors3
Capacitors6
Pin Headers2

📂 Repository Structure

text
Breadboard-Power-Supply-Module/
│
├── Schematic/
├── PCB/
├── Gerber_Files/
├── Images/
├── BOM.csv
├── LICENSE
└── README.md

🔧 Software Used

  • KiCad 9.0
  • PCB Editor
  • 3D Viewer

📋 Design Flow

  1. Circuit Design
  2. Schematic Capture
  3. PCB Layout Design
  4. Component Placement
  5. PCB Routing
  6. 3D Visualization
  7. Gerber Generation

🎯 Applications

  • Breadboard Prototyping
  • Arduino Projects
  • ESP32 Projects
  • Embedded Systems
  • IoT Development
  • Electronics Learning

📸 Additional Views

Breadboard Power Supply Module


📄 License

This project is licensed under the MIT License.


👨‍💻 Author

TSAR INDUSTRY ©

If you found this project useful, consider giving it a ⭐ on GitHub.

Parts

19
QtyValueFootprintReferences
30.1ufCapacitor_SMD:C_0805_2012MetricC2, C4, C6
3100uFCapacitor_SMD:CP_Elec_5x5.8C1, C3, C5
3GREEN_LEDLED_SMD:LED_0805_2012MetricD1, D2, D3
2Conn_02x02_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_VerticalJ4, J5
11KResistor_SMD:R_0805_2012MetricR1
1330Resistor_SMD:R_0805_2012MetricR2
1560Resistor_SMD:R_0805_2012MetricR3
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U2
1AMS1117-5.0Package_TO_SOT_SMD:SOT-223-3_TabPin2U1
1Barrel_Jack_SwitchConnector_BarrelJack:BarrelJack_HorizontalJ1
1Conn_01x03_PinConnector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_VerticalJ3
1FuseFuse:Fuse_0805_2012MetricF1

Similar boards

  • 2 layers36 × 43 mmAsac fc rev a, the printed circuit board in 3D

    Asac fc rev a

    victorhook/asac-fc

    asac fc is an rp2040 based flight controller made for FPV drone flying

    119 parts52GPL-3.0
  • 2 layers139.7 × 88.9 mmCharge Controller, the printed circuit board in 3D

    Charge Controller

    jharvey/Charge_Controller

    MPPT hardware which uses FUGU firmware

    163 parts24
  • 4 layers100.9 × 71.5 mmRaccoon, the printed circuit board in 3D

    Raccoon

    barbinbrad/raccoon

    Car Hacking PCB and firmware for a USB to CAN interface, with support for 4 CAN transceivers and an optional NEO-MP8 GNSS module.

    56 parts16MIT
  • 4 layers145 × 71.3 mmALL PCBS, the printed circuit board in 3D

    ALL PCBS

    NYDEREK/LineFollower_GRUZIK3.0

    Loved the project? Please consider giving a Star ⭐️

    142 parts15
  • 4 layers99.1 × 68.6 mmSTM32XP, the printed circuit board in 3D

    STM32XP

    MechatronixLab/STM32XP

    Development board based on the STM32F411RET6

    176 parts14
  • 2 layers47.9 × 49.6 mmBMP280Tiny, the printed circuit board in 3D

    BMP280Tiny

    danheeks/vario

    paragliding vario with arduino nano, piezo sounder, bmp180 altimeter, 4x Nimh batterys

    45 parts11
  • 2 layers60 × 90 mmRaccoon, the printed circuit board in 3D

    Raccoon

    mickabrig7/raccoon

    The open-source car bus analyzer !

    62 parts10MIT

Questions

How big is the Powersupplymodule PCB?

It measures 53.5 × 31 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Powersupplymodule use?

19 parts, built around the AMS1117-3.3 and AMS1117-5.0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Powersupplymodule KiCad files?

From the kripamaurya/Breadboard-Power-Supply-Module repository on GitHub, at the commit this page was made from: the board is Powersupplymodule.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Powersupplymodule design in my own project?

Its repository states no licence, so its author keeps all rights: ask kripamaurya before reusing the design.