2 layers46 × 103 mm
2 layers41.6 × 38.4 mm
Badge
Kreyl/BadgeЗначки для Кнутункта
- Size
- 41.6 × 38.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 45
- Nets
- 49
- Pads
- 194
- Tracks, vias
- 1,719, 107
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 15 Dec 2015
- Updated
- 7 Jul 2016
Overview
Badge is an open-source printed circuit board by Kreyl, from the Kreyl/Badge repository on GitHub. It is a 2-layer board of 41.6 × 38.4 mm with 45 parts on 49 nets, routed with 1,719 tracks and 107 vias.
It is built around the STM32F072C8T6, IRLML9303 and BAT54WS, with the NCP583SQ28 among its other parts. Its parts include 16 capacitors, 11 resistors, 2 transistors, 2 switches and 2 fuses. It belongs with the lEDs and displays boards and the STM32 boards of this library.
Main components
4
STM32F072C8T6
LQFP-48(7x7)-40℃~+85℃ 1.65V~3.6V 12bit 12bit 16KB 32 Bit 37 48MHz 64KB ARM Cortex-M0 Built-in FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
IRLML9303
SOT-23MOSFETsLeiditech
BAT54WS
SOD-3231 Independent 100mA 1V@100mA 2uA@25V 30V 600mA SOD-323 Schottky Diodes ROHSDiodes IncorporatedSchottky Diodes
NCP583SQ28
SC-82AB-40℃~+85℃@(Ta) 1 150mA 1uA 2.8V 250mV@(150mA) 6V Enable Fixed Positive SC-82AB Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSonsemiVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
45| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 0.1u | Capacitors:CAP_0603 | C3, C4, C6, C10, C12, C15 |
| 4 | 10k | Resistors:RES_0603 | R3, R4, R5, R10 |
| 4 | 1u | Capacitors:CAP_0603 | C1, C5, C8, C9 |
| 3 | 10n | Capacitors:CAP_0603 | C7, C17, C18 |
| 3 | 4.7u | Capacitors:CAP_0603 | C2, C11, C14 |
| 2 | 100k | Resistors:RES_0603 | R6, R8 |
| 2 | 51R | Resistors:RES_0603 | R1, R2 |
| 2 | CONN_3 | Connectors:PLS-3 | XL3, XL4 |
| 2 | Fuse0R | Resistors:RES_0603_FUSE | F1, F2 |
| 2 | IRLML9303 | SOT:SOT23-3 | Q1, Q2 |
| 1 | 100R | Resistors:RES_0603 | R11 |
| 1 | 1M | Resistors:RES_0603 | R9 |
| 1 | 4k7 | Resistors:RES_0603 | R7 |
| 1 | BAT | Installation:EEMB603030 | B1 |
| 1 | BAT54WS | Diodes:SOD323 | D1 |
| 1 | IT-1198E | BtnsSwitches:BTN_IT1198 | SW2 |
| 1 | MCP73832 | SOT:SOT23-5 | DA2 |
| 1 | NCP583SQ | SOT:SC82AB | DA1 |
| 1 | Round2.2 | Display:Round2_2 | U1 |
| 1 | STM32F072C8T6 | LQFP_TQFP:LQFP48 | DD1 |
| 1 | ST_SWD | Connectors:PLS-4 | XL1 |
| 1 | SWITCH | BtnsSwitches:SW_SS-1P2T | SW1 |
| 1 | TESTPOINT | PCB:TESTPOINT_1MM | TP1 |
| 1 | USB_MINI_B | Connectors:USBmicro_MOLEX_WM17142 | XL2 |
| 1 | W25Q64FV | SO_DIL_TSSOP:SO8_208MIL | DD2 |
Questions
How big is the Badge PCB?
It measures 41.6 × 38.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Badge use?
45 parts, built around the STM32F072C8T6, IRLML9303, BAT54WS and NCP583SQ28. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Badge KiCad files?
From the Kreyl/Badge repository on GitHub, at the commit this page was made from: the board is Badge_hw/Badge.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Badge design in my own project?
Its repository states no licence, so its author keeps all rights: ask Kreyl before reusing the design.
Similar boards
- 2 layers30 × 103 mm
- 2 layers109 × 64 mm
- 2 layers90 × 108 mm
- 2 layers87.5 × 42.4 mm
- 2 layers
Locket
Kreyl/Locket
Locket ptetending to be universal. Radio, RGB LED, vibro, beeper, slide switch, button, pill connector, accelerometer, 2xAAA
76 parts - 2 layers
- 2 layers45 × 79.5 mm
