

DRC PumpDriver2026
6ch ポンプ駆動基板
- Size
- 60 × 45 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 69
- Nets
- 67
- Pads
- 226
- Tracks, vias
- 210, 138
- Pours
- 107
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 1 Apr 2026
- Updated
- 15 May 2026
Overview
DRC PumpDriver2026 is an open-source printed circuit board by kotek-7, from the kotek-7/DRC-PumpDriver2026 repository on GitHub. It is a 2-layer board of 60 × 45 mm with 69 parts on 67 nets, routed with 210 tracks and 138 vias.
It is built around the CH340E, TJA1441AT/0Z and TLP241A(F, with the RT9080-33GJ5 and SS2040FL among its other parts. Its parts include 19 resistors, 11 diodes, 11 connectors, 9 capacitors and 9 ICs. It belongs with the STM32 boards of this library.
Main components
5CH340E
MSOP-10150uA 20mA 2Mbps 3.3V、5V Transceiver USB 2.0 MSOP-10 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB ConvertersTJA1441AT/0Z
SO-8-40℃~+150℃ 4.5V~5.5V 5Mbps 60mA CAN Transceiver SO-8 CAN Transceivers ROHSNXP SemiconductorsCAN TransceiversTLP241A(F
DIP-4DIP-4 Solid State Relays (MOS Output) ROHSToshibaSolid State Relays (MOS Output)RT9080-33GJ5
TSOT-23-5-40℃~+125℃@(Tj) 1 2uA 3.3V 360mV@(600mA) 42uVrms 5.5V 600mA 75dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive TSOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSRichtek TechVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSS2040FL
SOD-123FLSOD-123FL Schottky Diodes ROHSFUXINSEMISchottky Diodes
README
README.mdParts
69| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3, R4, R5, R7, R9, R11, R13, R15 |
| 7 | 0.1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C4, C5, C6, C7, C8, C9 |
| 7 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D4, D5, D6, D7, D8, D9, D10 |
| 6 | 470 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R8, R10, R12, R14, R16 |
| 6 | TLP241A | lib:DIP4_TOS | U3, U4, U5, U6, U7, U8 |
| 2 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R18, R19 |
| 2 | CAN | Connector_JST:JST_XH_S4B-XH-A_1x04_P2.50mm_Horizontal | J2, J3 |
| 2 | SS2040FL | Diode_SMD:D_SOD-123F | D1, D11 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 120 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R17 |
| 1 | 3V3 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 1 | 5V | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D3 |
| 1 | CH340E | Package_SO:MSOP-10_3x3mm_P0.5mm | U9 |
| 1 | DIP | Button_Switch_SMD:SW_DIP_SPSTx04_Slide_Copal_CHS-04B_W7.62mm_P1.27mm | SW2 |
| 1 | LOGO | MyLogo:kuma | G*** |
| 1 | PUMP1 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J4 |
| 1 | PUMP2 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J5 |
| 1 | PUMP3 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J6 |
| 1 | PUMP4 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J7 |
| 1 | PUMP5 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J8 |
| 1 | PUMP6 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J9 |
| 1 | RT9080-33GJ5 | Package_TO_SOT_SMD:TSOT-23-5 | U1 |
| 1 | SS-12D00G3 | lib:SS-12D00G3 | SW3 |
| 1 | STLINK | Connector_IDC:IDC-Header_2x03_P2.54mm_Vertical | J1 |
| 1 | STM32F303K8Tx | Package_QFP:LQFP-32_7x7mm_P0.8mm | U2 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_EVQPE1 | SW1 |
| 1 | TJA1441AT | footprints:SOIC127P600X175-8N | CAN1 |
| 1 | USB_C | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J11 |
| 1 | VIN_PWR | Connector_AMASS:AMASS_XT30PW-M_1x02_P2.50mm_Horizontal | J10 |
The 64 most common of 69 parts.
Similar boards
- 2 layers80 × 60 mm

- 2 layers80 × 60 mm

- 2 layers60 × 60 mm

- 2 layers60 × 45 mm

- 2 layers114.3 × 188 mm

- 2 layers88.9 × 215.9 mm

Mss crossover array
IowaScaledEngineering/mss-crossover
Integrated Crossover Module for Free-mo Modular Signal System
291 parts - 2 layers90 × 70 mm

- 2 layers80 × 60 mm

Questions
How big is the DRC PumpDriver2026 PCB?
It measures 60 × 45 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DRC PumpDriver2026 use?
69 parts, built around the CH340E, TJA1441AT/0Z, TLP241A(F and RT9080-33GJ5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DRC PumpDriver2026 KiCad files?
From the kotek-7/DRC-PumpDriver2026 repository on GitHub, at the commit this page was made from: the board is DRC-PumpDriver2026.kicad_pcb and its schematic DRC-PumpDriver2026.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DRC PumpDriver2026 design in my own project?
Its repository states no licence, so its author keeps all rights: ask kotek-7 before reusing the design.