

DRC RepoChecker
- Size
- 60 × 45 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 44
- Nets
- 57
- Pads
- 169
- Tracks, vias
- 202, 146
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 19 Apr 2026
- Updated
- 19 Apr 2026
Overview
DRC RepoChecker is an open-source printed circuit board by kotek-7, from the kotek-7/DRC-LiPoChecker repository on GitHub. It is a 2-layer board of 60 × 45 mm with 44 parts on 57 nets, routed with 202 tracks and 146 vias.
It is built around the CH340E, 74HC595 and RT9080-33GJ5, with the SS2040FL among its other parts. Its parts include 16 resistors, 8 capacitors, 6 ICs, 4 diodes and 3 connectors. It belongs with the STM32 boards of this library.
Main components
4CH340E
MSOP-10150uA 20mA 2Mbps 3.3V、5V Transceiver USB 2.0 MSOP-10 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB Converters74HC595
SOP-16-40℃~+85℃ 1 100ns@5V,50pF 10MHz 2V~6V 74HC 8 Serial-to-Serial or Parallel Tri-State SOP-16 Shift Registers ROHSGRShift RegistersRT9080-33GJ5
TSOT-23-5-40℃~+125℃@(Tj) 1 2uA 3.3V 360mV@(600mA) 42uVrms 5.5V 600mA 75dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive TSOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSRichtek TechVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSS2040FL
SOD-123FLSOD-123FL Schottky Diodes ROHSFUXINSEMISchottky Diodes
README
README.mdParts
44| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 470 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9, R10, R11, R12, R13, R14, R15, R16 |
| 4 | 0.1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C6, C7, C8 |
| 3 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3, R6 |
| 3 | SS2040FL | Diode_SMD:D_SOD-123F | D1, D3, D4 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C4 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R8 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 3V3 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 1 | 74HC595 | Package_SO:SOP-16_4.55x10.3mm_P1.27mm | U5 |
| 1 | CH340E | Package_SO:MSOP-10_3x3mm_P0.5mm | U3 |
| 1 | Conn_01x02 | Connector_AMASS:AMASS_XT30PW-M_1x02_P2.50mm_Horizontal | J1 |
| 1 | LOGO | MyLogo:kuma | G*** |
| 1 | M78SAR033-0.5 | lib:M78SAR033-0.5 | U2 |
| 1 | OSL30561-LRA | lib:OSL30561-LRA | U6 |
| 1 | RT9080-33GJ5 | Package_TO_SOT_SMD:TSOT-23-5 | U1 |
| 1 | STLINK | Connector_IDC:IDC-Header_2x03_P2.54mm_Vertical | J2 |
| 1 | STM32C011F4Px | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U4 |
| 1 | SW_Push | lib:TVAF06-A020B-R | SW1 |
| 1 | USB_C | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J3 |
The 39 most common of 44 parts.
Similar boards
- 2 layers60 × 60 mm

- 2 layers60 × 45 mm

- 2 layers80 × 60 mm

- 2 layers90 × 70 mm

- 2 layers80 × 60 mm

- 2 layers80 × 60 mm

- 4 layers25.4 × 25.4 mm

SparkFun Qwiic GNSS SAM M8Q
embeddedos-org/eCAD-Hardware-Products
Hardware designs + EE docs + Board datasheets of Multiple products
73 parts8MIT - 4 layers22.7 × 58.5 mm

Questions
How big is the DRC RepoChecker PCB?
It measures 60 × 45 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DRC RepoChecker use?
44 parts, built around the CH340E, 74HC595, RT9080-33GJ5 and SS2040FL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DRC RepoChecker KiCad files?
From the kotek-7/DRC-LiPoChecker repository on GitHub, at the commit this page was made from: the board is DRC-RepoChecker.kicad_pcb and its schematic 7SEG_3DEG.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DRC RepoChecker design in my own project?
Its repository states no licence, so its author keeps all rights: ask kotek-7 before reusing the design.