

DRC CCTL2026
STM32 G474 中央制御基板
- Size
- 80 × 60 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 81
- Nets
- 90
- Pads
- 322
- Tracks, vias
- 490, 258
- Pours
- 58
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 31 Mar 2026
- Updated
- 12 May 2026
Overview
DRC CCTL2026 is an open-source printed circuit board by kotek-7, from the kotek-7/DRC-CCTL2026 repository on GitHub. It is a 2-layer board of 80 × 60 mm with 81 parts on 90 nets, routed with 490 tracks and 258 vias.
It is built around the CH340E, TJA1441AT/0Z and SS2040FL, with the 1N4148W and MMBT3904 among its other parts. Its parts include 24 capacitors, 18 resistors, 11 connectors, 10 diodes and 3 ICs. It belongs with the STM32 boards of this library.
Main components
5CH340E
MSOP-10150uA 20mA 2Mbps 3.3V、5V Transceiver USB 2.0 MSOP-10 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB ConvertersTJA1441AT/0Z
SO-8-40℃~+150℃ 4.5V~5.5V 5Mbps 60mA CAN Transceiver SO-8 CAN Transceivers ROHSNXP SemiconductorsCAN TransceiversSS2040FL
SOD-123FLSOD-123FL Schottky Diodes ROHSFUXINSEMISchottky Diodes1N4148W
SOD-123150mA 1A 1V@50mA 1uA@75V 400mW 4ns 75V Independent SOD-123 Switching Diodes ROHSSTMicroelectronicsSwitching DiodesMMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
README
README.mdキャチロボ2026用中央制御基板のKiCad回路図データです。
プレビュー (v0.2.1): https://kicanvas.org/?repo=https%3A%2F%2Fgithub.com%2Fkotek-7%2FDRC-CCTL2026%2Ftree%2Fv0.2.1
Parts
81| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 0.1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4, C5, C6, C7, C8, C9, C13, C16, C17, C18, C19, C21, C23, C25 |
| 6 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C10, C11, C12, C20, C22, C24 |
| 6 | 4.7k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10, R11, R16, R17, R18, R19 |
| 5 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4, R6 |
| 5 | SS2040FL | Diode_SMD:D_SOD-123F | D2, D3, D4, D9, D10 |
| 4 | 5.1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R12, R13, R20 |
| 3 | 120 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R8, R9 |
| 3 | TJA1441AT | lib:SO8_SOT96-1_NXP | FDCAN1, FDCAN2, FDCAN3 |
| 2 | USB_C | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J10, J12 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 1N4148W | Diode_SMD:D_SOD-123 | D5 |
| 1 | 22u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 3V3 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | 4.7u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C15 |
| 1 | AQM1602Y-NLW-FBW | vsrXiamen:AQM1602Y-NLW | LCD1 |
| 1 | AZ1084C-3.3 | Package_TO_SOT_SMD:TO-252-2 | U1 |
| 1 | CH340E | Package_SO:MSOP-10_3x3mm_P0.5mm | U2 |
| 1 | DIP | Button_Switch_SMD:SW_DIP_SPSTx04_Slide_Copal_CHS-04B_W7.62mm_P1.27mm | SW1 |
| 1 | FDCAN1 | Connector_JST:JST_XH_S4B-XH-A_1x04_P2.50mm_Horizontal | J2 |
| 1 | FDCAN2 | Connector_JST:JST_XH_S4B-XH-A_1x04_P2.50mm_Horizontal | J3 |
| 1 | FDCAN3 | Connector_JST:JST_XH_S4B-XH-A_1x04_P2.50mm_Horizontal | J4 |
| 1 | I2C1 | Connector_JST:JST_XH_S5B-XH-A_1x05_P2.50mm_Horizontal | J8 |
| 1 | I2C2 | Connector_JST:JST_XH_S5B-XH-A_1x05_P2.50mm_Horizontal | J9 |
| 1 | LED1 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D6 |
| 1 | LED2 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D7 |
| 1 | LED3 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D8 |
| 1 | LOGO | MyLogo:kuma | G*** |
| 1 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | SS-12D00G3 | lib:SS-12D00G3 | SW2 |
| 1 | STLINK | Connector_IDC:IDC-Header_2x03_P2.54mm_Vertical | J1 |
| 1 | STM32G474RETx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U4 |
| 1 | SW1 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J5 |
| 1 | SW2 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J6 |
| 1 | SW3 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J7 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_EVQPE1 | SW3 |
| 1 | UGCM0903EPD | lib:UGCM0903EPD_5_0 | BZ1 |
The 76 most common of 81 parts.
Similar boards
- 2 layers60 × 45 mm

- 2 layers80 × 60 mm

- 2 layers60 × 60 mm

- 2 layers60 × 45 mm

- 2 layers80 × 60 mm

- 4 layers178 × 99 mm

FreeDSP OCTAVIA
freeDSP/freeDSP-OCTAVIA
8ch Output ADAU1452/1466 DSP Board with Analog/COAX/OPT/USB/Raspberry-Pi Input
529 parts19CC-BY-SA-4.0 - 2 layers249 × 135 mm

- 2 layers323.8 × 112 mm

Questions
How big is the DRC CCTL2026 PCB?
It measures 80 × 60 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DRC CCTL2026 use?
81 parts, built around the CH340E, TJA1441AT/0Z, SS2040FL and 1N4148W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DRC CCTL2026 KiCad files?
From the kotek-7/DRC-CCTL2026 repository on GitHub, at the commit this page was made from: the board is DRC-CCTL2026.kicad_pcb and its schematic AQM1602Y.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DRC CCTL2026 design in my own project?
Its repository states no licence, so its author keeps all rights: ask kotek-7 before reusing the design.