
Coco2
baldengineer/bit-preserve
Project for capturing vintage, classic, aka old computer schematics in KiCad.

A keyboard pretending to be a joystick for classic home microcomputers
Yboard is an open-source printed circuit board by kotbehemot53, from the kotbehemot53/yboard repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 192.5 × 63.5 mm with 29 parts on 24 nets, routed with 167 tracks and 20 vias.
It is built around the NE555P. Its parts include 9 switches, 3 resistors, 3 connectors, 2 capacitors and 1 IC. It belongs with the keyboards and input boards of this library.
A keyboard pretending to be a joystick for classic home microcomputers
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 100 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 100k_FREQ_POT | Potentiometer_THT:Potentiometer_Piher_T-16H_Single_Horizontal | RV1 |
| 1 | 100nF | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C1 |
| 1 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
| 1 | 1uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C2 |
| 1 | 360k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 4.7K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 1 | AF_SW | Yboard:SS12T44_SLIDER_SWITCH_SPDT | SW8 |
| 1 | AMIGA_C64_SW | Yboard:SS12T44_SLIDER_SWITCH_SPDT | SW9 |
| 1 | A_BTN | Yboard:SW_MX | SW3 |
| 1 | B_BTN | Yboard:SW_MX | SW2 |
| 1 | CONN_D | Connector_JST:JST_XH_S5B-XH-A_1x05_P2.50mm_Horizontal | J2 |
| 1 | CONN_F | Connector_JST:JST_XH_S5B-XH-A_1x05_P2.50mm_Horizontal | J3 |
| 1 | DOWN_BTN | Yboard:SW_MX | SW6 |
| 1 | FIRE_BTN | Yboard:SW_MX | SW1 |
| 1 | JOYPORT_OUT | Connector_JST:JST_XH_S9B-XH-A_1x09_P2.50mm_Horizontal | J1 |
| 1 | LEFT_BTN | Yboard:SW_MX | SW5 |
| 1 | NE555P | Package_DIP:DIP-8_W7.62mm | U1 |
| 1 | RIGHT_BTN | Yboard:SW_MX | SW4 |
| 1 | UP_BTN | Yboard:SW_MX | SW7 |
The 20 most common of 29 parts.

baldengineer/bit-preserve
Project for capturing vintage, classic, aka old computer schematics in KiCad.

The-Invent0r/8-bit-Computer-PCB
These are the KiCAD files for my 8-Bit Computer.

DarcyJProjects/touchtone555
An open-source DIY, NE555-based analogue synthesizer - play notes with a stylus



benjiaomodular/SynthCard
I designed this project with the help of PCBWay. You can get a copy of these cards through the PCBWay Shared Projects page.

fortinsylvain/MyCpu
Home brew CPU Hardware with 1-bit ALU implementation using 74LSxx, a micro-code and assembler coded in C#.

hackup/C128Diag
Replica of the Commodore C128 Diagnostic Test cartridge Assy No. 325093-01.
It measures 192.5 × 63.5 mm and has 2 copper layers, 1.6 mm thick.
29 parts, built around the NE555P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the kotbehemot53/yboard repository on GitHub, at the commit this page was made from: the board is yboard.kicad_pcb and its schematic yboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).