2 layers45.7 × 39.4 mm
AT2XT
cr1901/AT2XT
[Moved to Codeberg] AT to XT Keyboard Protocol Converter firmware + schematic
15 parts32GPL-3.0
4 layers51.6 × 20.3 mm
STM32L431RCT6 prototype board
koson/STM32L431RCT6_prototype_board1- Size
- 51.6 × 20.3 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 58
- Pads
- 163
- Tracks, vias
- 304, 56
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 19 Jun 2023
- Updated
- 18 Jul 2023
Overview
STM32L431RCT6 prototype board is an open-source printed circuit board by koson, from the koson/STM32L431RCT6_prototype_board repository on GitHub. It is a 4-layer board of 51.6 × 20.3 mm with 31 parts on 58 nets, routed with 304 tracks and 56 vias.
It is built around the SY8089A1AAC, 0603YC104KAT2A and 1210X226M100CT, with the CKCS3015-2.2UH/M, MCR03EZPJ224 and WR06X4992FTL among its other parts. Its parts include 12 capacitors, 7 resistors, 2 ICs, 2 diodes and 2 connectors. It belongs with the STM32 boards of this library.
Main components
6
SY8089A1AAC
SOT-23-5-40℃~+125℃@(TA/TJ) 1 1.5MHz 2.5V~5.5V 2A 50uA Adjustable Buck Buck Built-in Yes SOT-23-5 DC-DC Converters ROHS矽力杰silergyDC-DC Converters
0603YC104KAT2A
0603100nF 16V X7R ±10% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSKyocera AVXMultilayer Ceramic Capacitors MLCC - SMD/SMT
1210X226M100CT
121010V 22uF X5R ±20% 1210 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSWalsin TechnologyMultilayer Ceramic Capacitors MLCC - SMD/SMT
CKCS3015-2.2UH/M
SMD,3x3mm1.6A 1.6A 2.2uH 60mΩ Magnetic Shielded Inductor ±20% SMD,3x3mm Power Inductors ROHSCENKERPower Inductors
MCR03EZPJ224
0603-55℃~+155℃ 100mW 220kΩ 50V Thick Film Resistor ±200ppm/℃ ±5% 0603 Chip Resistor - Surface Mount ROHSROHM SemiconductorChip Resistor - Surface MountWR06X4992FTL
0603-55℃~+155℃ 100mW 49.9kΩ 75V Thick Film Resistor ±1% ±100ppm/℃ 0603 Chip Resistor - Surface Mount ROHSWalsin TechnologyChip Resistor - Surface Mount
Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100nF | Library:C_0603_1608Metric | C3, C4, C5, C6, C7, C8, C10 |
| 3 | 22uF | Library:C_0603_1608Metric | C9, C11, C12 |
| 2 | 10k | Library:R_0603_1608Metric | R2, R3 |
| 2 | 12pF | Library:C_0603_1608Metric | C1, C2 |
| 2 | 330 | Library:R_0603_1608Metric | R6, R7 |
| 2 | RED | Library:LED_0603_1608Metric | LED1, LED2 |
| 1 | 2.2uH/1.5A | Library:L_Neosid_SMS-ME3015 | L1 |
| 1 | 220k | Library:R_0603_1608Metric | R4 |
| 1 | 22R | Library:R_Array_Convex_4x0603 | RN1 |
| 1 | 47R | Library:R_0603_1608Metric | R1 |
| 1 | 49.9k | Library:R_0603_1608Metric | R5 |
| 1 | 8MHz | Library:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | BLM18PG300SN1D | Library:L_0603_1608Metric | FB1 |
| 1 | Conn_02x20_Counter_Clockwise | Library:Socket_DIP-40_15.24mm_Conn | J2 |
| 1 | Fuse | Fuse:Fuse_1812_4532Metric | F1 |
| 1 | RESET | Library:DTSM-6 | S1 |
| 1 | STM32L431CCTx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | SWD | Library:PinHeader_2x03_P2.54mm_Vertical_SMD | J1 |
| 1 | SY8089 | Library:SOT-23-5 | U2 |
Similar boards
- 2 layers40 × 27 mm
Sensor board voc temp
adamvirovecz/sensor-board-voc-temp
VOC, Humidity and Temperature Sensor Board
39 parts1MIT - 2 layers70 × 100 mm
- 4 layers60.6 × 27.6 mm
Display pcb
HW-Lab-Hardware-Design-Agency/WebScreen-PCB
WebScreen PCB designs, BOM and other manufacturing files.
93 parts13CERN-OHL-P-2.0 - 4 layers83 × 67.5 mm
MarineBoard
Cadburies/SisuAssistant
Sailing yacht Sisu: Home Assistant + ESPHome Marine Board (alternator regulation, tanks) + MQTT kernel, Signal K/Grafana/InfluxDB on a NAS, and Sisu Nav chart & weather-routing cockpit.
162 parts1Apache-2.0 - 4 layers80.6 × 57 mm
HighSpeedUSBHub
Acidicts/HighSpeedUSBHub
I looked at an old USB 2.0 hub I made and though what if I could make a faster one? So I did(whether it works or not is another story).
86 parts - 4 layers85 × 56 mm
- 2 layers198 × 67.8 mm
Esp relay-8ch v2
thermseekr/esp-relay-8ch
ESP32 based board with 8x 24 VDC inputs and 8x 10A relay outputs.
142 parts
Questions
How big is the STM32L431RCT6 prototype board PCB?
It measures 51.6 × 20.3 mm and has 4 copper layers, 1.6 mm thick.
What parts does the STM32L431RCT6 prototype board use?
31 parts, built around the SY8089A1AAC, 0603YC104KAT2A, 1210X226M100CT and CKCS3015-2.2UH/M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the STM32L431RCT6 prototype board KiCad files?
From the koson/STM32L431RCT6_prototype_board repository on GitHub, at the commit this page was made from: the board is STM32L431RCT6_prototype_board.kicad_pcb and its schematic STM32L431RCT6_prototype_board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the STM32L431RCT6 prototype board design in my own project?
Its repository states no licence, so its author keeps all rights: ask koson before reusing the design.