

PSU 4CH
- Size
- 37.5 × 53.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 24
- Nets
- 16
- Pads
- 71
- Tracks, vias
- 99, 1
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 13 Mar 2022
- Updated
- 5 Dec 2019
Overview
PSU 4CH is an open-source printed circuit board by koson, from the koson/KicadProject repository on GitHub. It is a 2-layer board of 37.5 × 53.3 mm with 24 parts on 16 nets, routed with 99 tracks and 1 via.
It is built around the LM358 and L7805. Its parts include 14 capacitors, 4 ICs, 2 resistors and 2 connectors. It belongs with the power boards of this library.
Main components
2LM358
SOP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 24mA 3V~36V 500uA 50nA 5mV 80dB Built-in compensation SOP-8 Operational Amplifier ROHSMSKSEMIOperational AmplifierL7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
24| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100nF | Capacitors_SMD:C_0805_HandSoldering | C2, C4, C5, C7, C10, C11, C12, C13, C14 |
| 5 | 10uF | CustomFootprint:Cap_Pol_Radial_D8_P2 | C1, C3, C6, C8, C9 |
| 1 | 10K | CustomFootprint:Potentiometer_Bourns_3386 | POT2 |
| 1 | 1kΩ | CustomFootprint:Potentiometer_Bourns_3386 | POT1 |
| 1 | 6K8 | CustomFootprint:Resistor-0.25W | R2 |
| 1 | 7K5 | CustomFootprint:Resistor-0.25W | R1 |
| 1 | I/O | CustomFootprint:Pin_Header_Straight_1x04 | J1 |
| 1 | L7805 | CustomFootprint:TO-220_Neutral123_Vertical | U1 |
| 1 | LD1117-3V3 | CustomFootprint:TO-220_Neutral123_Vertical | U2 |
| 1 | LM358 | CustomFootprint:IC_PDIP_8pin | U4 |
| 1 | PSU 4CH I/O | CustomFootprint:Pin_Header_Straight_1x07 | J2 |
| 1 | TC7662 | CustomFootprint:IC_PDIP_8pin | U3 |
More from koson/KicadProject
12- 2 layers150 × 100 mm

- 2 layers100 × 100 mm

- 2 layers100 × 100 mm

- 2 layers

- 2 layers190.5 × 88.9 mm

- 2 layers75 × 50 mm

- 2 layers100 × 100 mm

- 2 layers95 × 60 mm

- 2 layers146.1 × 69.9 mm

- 2 layers112.5 × 60 mm

- 2 layers88.9 × 48.9 mm

- 2 layers62.2 × 55.9 mm

Similar boards
- 2 layers132.1 × 45.7 mm

IPoS
peterheinrich/InternetOverSpaghetti
Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.
42 parts342 - 2 layers144.1 × 182.2 mm

SHVC CPU-01
starlightk7/OpenSFC
OSHW Reproduction Parts related to the Super Famicom / Super Nintendo game console
498 parts114CERN-OHL-S-2.0 - 2 layers160 × 100 mm

MPCNC Nano Estlcam Shield
tnn85/MPCNC-Nano-Estlcam-Shield
Ein CNC Shield für die MPCNC in Verwendung mit Estlcam
96 parts70 - 2 layers114.3 × 64.8 mm

- 2 layers164 × 100 mm

- 2 layers100 × 100 mm

- 2 layers80 × 60 mm

Sgikbd
jtsiomb/sgikbd
PS/2 keyboard/mouse converter for old Silicon Graphics computers.
35 parts20GPL-3.0 - 2 layers94.4 × 90 mm

Impedance Analyzer V3
EliMattingly22/Simple_Impedance_Analyzer
A PCB impedance analyzer to measure loads to 100kHz and beyond
92 parts12MIT
Questions
How big is the PSU 4CH PCB?
It measures 37.5 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PSU 4CH use?
24 parts, built around the LM358 and L7805. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PSU 4CH KiCad files?
From the koson/KicadProject repository on GitHub, at the commit this page was made from: the board is Commercial/PSU 4CH/Version 2 Power Board/PSU 4CH.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the PSU 4CH design in my own project?
Its repository states no licence, so its author keeps all rights: ask koson before reusing the design.